Major cleanup, added all old files (python2) to 'old_v0.1' folder

flask/lib/python3.4/config-3.4m/Setup

@@ -0,0 +1,392 @@
+# -*- makefile -*-
+# The file Setup is used by the makesetup script to construct the files
+# Makefile and config.c, from Makefile.pre and config.c.in,
+# respectively.  The file Setup itself is initially copied from
+# Setup.dist; once it exists it will not be overwritten, so you can edit
+# Setup to your heart's content.  Note that Makefile.pre is created
+# from Makefile.pre.in by the toplevel configure script.
+
+# (VPATH notes: Setup and Makefile.pre are in the build directory, as
+# are Makefile and config.c; the *.in and *.dist files are in the source
+# directory.)
+
+# Each line in this file describes one or more optional modules.
+# Modules enabled here will not be compiled by the setup.py script,
+# so the file can be used to override setup.py's behavior.
+
+# Lines have the following structure:
+#
+# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
+#
+# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
+# <cpparg> is anything starting with -I, -D, -U or -C
+# <library> is anything ending in .a or beginning with -l or -L
+# <module> is anything else but should be a valid Python
+# identifier (letters, digits, underscores, beginning with non-digit)
+#
+# (As the makesetup script changes, it may recognize some other
+# arguments as well, e.g. *.so and *.sl as libraries.  See the big
+# case statement in the makesetup script.)
+#
+# Lines can also have the form
+#
+# <name> = <value>
+#
+# which defines a Make variable definition inserted into Makefile.in
+#
+# Finally, if a line contains just the word "*shared*" (without the
+# quotes but with the stars), then the following modules will not be
+# built statically.  The build process works like this:
+#
+# 1. Build all modules that are declared as static in Modules/Setup,
+#    combine them into libpythonxy.a, combine that into python.
+# 2. Build all modules that are listed as shared in Modules/Setup.
+# 3. Invoke setup.py. That builds all modules that
+#    a) are not builtin, and
+#    b) are not listed in Modules/Setup, and
+#    c) can be build on the target
+#
+# Therefore, modules declared to be shared will not be
+# included in the config.c file, nor in the list of objects to be
+# added to the library archive, and their linker options won't be
+# added to the linker options. Rules to create their .o files and
+# their shared libraries will still be added to the Makefile, and
+# their names will be collected in the Make variable SHAREDMODS.  This
+# is used to build modules as shared libraries.  (They can be
+# installed using "make sharedinstall", which is implied by the
+# toplevel "make install" target.)  (For compatibility,
+# *noconfig* has the same effect as *shared*.)
+#
+# In addition, *static* explicitly declares the following modules to
+# be static.  Lines containing "*static*" and "*shared*" may thus
+# alternate throughout this file.
+
+# NOTE: As a standard policy, as many modules as can be supported by a
+# platform should be present.  The distribution comes with all modules
+# enabled that are supported by most platforms and don't require you
+# to ftp sources from elsewhere.
+
+
+# Some special rules to define PYTHONPATH.
+# Edit the definitions below to indicate which options you are using.
+# Don't add any whitespace or comments!
+
+# Directories where library files get installed.
+# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
+DESTLIB=$(LIBDEST)
+MACHDESTLIB=$(BINLIBDEST)
+
+# NOTE: all the paths are now relative to the prefix that is computed
+# at run time!
+
+# Standard path -- don't edit.
+# No leading colon since this is the first entry.
+# Empty since this is now just the runtime prefix.
+DESTPATH=
+
+# Site specific path components -- should begin with : if non-empty
+SITEPATH=
+
+# Standard path components for test modules
+TESTPATH=
+
+# Path components for machine- or system-dependent modules and shared libraries
+MACHDEPPATH=:$(PLATDIR)
+EXTRAMACHDEPPATH=
+
+COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)
+PYTHONPATH=$(COREPYTHONPATH)
+
+
+# The modules listed here can't be built as shared libraries for
+# various reasons; therefore they are listed here instead of in the
+# normal order.
+
+# This only contains the minimal set of modules required to run the
+# setup.py script in the root of the Python source tree.
+
+posix posixmodule.c		# posix (UNIX) system calls
+errno errnomodule.c		# posix (UNIX) errno values
+pwd pwdmodule.c			# this is needed to find out the user's home dir
+				# if $HOME is not set
+_sre _sre.c			# Fredrik Lundh's new regular expressions
+_codecs _codecsmodule.c		# access to the builtin codecs and codec registry
+_weakref _weakref.c		# weak references
+_functools _functoolsmodule.c   # Tools for working with functions and callable objects
+_operator _operator.c	        # operator.add() and similar goodies
+_collections _collectionsmodule.c # Container types
+itertools itertoolsmodule.c    # Functions creating iterators for efficient looping
+atexit atexitmodule.c      # Register functions to be run at interpreter-shutdown
+_stat _stat.c			# stat.h interface
+
+# access to ISO C locale support
+_locale _localemodule.c  # -lintl
+
+# Standard I/O baseline
+_io -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
+
+# The zipimport module is always imported at startup. Having it as a
+# builtin module avoids some bootstrapping problems and reduces overhead.
+zipimport zipimport.c
+
+# faulthandler module
+faulthandler faulthandler.c
+
+# debug tool to trace memory blocks allocated by Python
+_tracemalloc _tracemalloc.c hashtable.c
+
+# The rest of the modules listed in this file are all commented out by
+# default.  Usually they can be detected and built as dynamically
+# loaded modules by the new setup.py script added in Python 2.1.  If
+# you're on a platform that doesn't support dynamic loading, want to
+# compile modules statically into the Python binary, or need to
+# specify some odd set of compiler switches, you can uncomment the
+# appropriate lines below.
+
+# ======================================================================
+
+# The Python symtable module depends on .h files that setup.py doesn't track
+_symtable symtablemodule.c
+
+# Uncommenting the following line tells makesetup that all following
+# modules are to be built as shared libraries (see above for more
+# detail; also note that *static* reverses this effect):
+
+#*shared*
+
+# GNU readline.  Unlike previous Python incarnations, GNU readline is
+# now incorporated in an optional module, configured in the Setup file
+# instead of by a configure script switch.  You may have to insert a
+# -L option pointing to the directory where libreadline.* lives,
+# and you may have to change -ltermcap to -ltermlib or perhaps remove
+# it, depending on your system -- see the GNU readline instructions.
+# It's okay for this to be a shared library, too.
+
+#readline readline.c -lreadline -ltermcap
+
+
+# Modules that should always be present (non UNIX dependent):
+
+#array arraymodule.c	# array objects
+#cmath cmathmodule.c _math.c # -lm # complex math library functions
+#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
+#_struct _struct.c	# binary structure packing/unpacking
+#time timemodule.c # -lm # time operations and variables
+#_weakref _weakref.c	# basic weak reference support
+#_testcapi _testcapimodule.c    # Python C API test module
+#_random _randommodule.c	# Random number generator
+#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c	# elementtree accelerator
+#_pickle _pickle.c	# pickle accelerator
+#_datetime _datetimemodule.c	# datetime accelerator
+#_bisect _bisectmodule.c	# Bisection algorithms
+#_heapq _heapqmodule.c	# Heap queue algorithm
+
+#unicodedata unicodedata.c    # static Unicode character database
+
+
+# Modules with some UNIX dependencies -- on by default:
+# (If you have a really backward UNIX, select and socket may not be
+# supported...)
+
+#fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
+#spwd spwdmodule.c		# spwd(3)
+#grp grpmodule.c		# grp(3)
+#select selectmodule.c	# select(2); not on ancient System V
+
+# Memory-mapped files (also works on Win32).
+#mmap mmapmodule.c
+
+# CSV file helper
+#_csv _csv.c
+
+# Socket module helper for socket(2)
+#_socket socketmodule.c
+
+# Socket module helper for SSL support; you must comment out the other
+# socket line above, and possibly edit the SSL variable:
+#SSL=/usr/local/ssl
+#_ssl _ssl.c \
+#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+#	-L$(SSL)/lib -lssl -lcrypto
+
+# The crypt module is now disabled by default because it breaks builds
+# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
+#
+# First, look at Setup.config; configure may have set this for you.
+
+#_crypt _cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems
+
+
+# Some more UNIX dependent modules -- off by default, since these
+# are not supported by all UNIX systems:
+
+#nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere
+#termios termios.c	# Steen Lumholt's termios module
+#resource resource.c	# Jeremy Hylton's rlimit interface
+
+#_posixsubprocess _posixsubprocess.c  # POSIX subprocess module helper
+
+# Multimedia modules -- off by default.
+# These don't work for 64-bit platforms!!!
+# #993173 says audioop works on 64-bit platforms, though.
+# These represent audio samples or images as strings:
+
+#audioop audioop.c	# Operations on audio samples
+
+
+# Note that the _md5 and _sha modules are normally only built if the
+# system does not have the OpenSSL libs containing an optimized version.
+
+# The _md5 module implements the RSA Data Security, Inc. MD5
+# Message-Digest Algorithm, described in RFC 1321.
+
+#_md5 md5module.c
+
+
+# The _sha module implements the SHA checksum algorithms.
+# (NIST's Secure Hash Algorithms.)
+#_sha1 sha1module.c
+#_sha256 sha256module.c
+#_sha512 sha512module.c
+
+
+# The _tkinter module.
+#
+# The command for _tkinter is long and site specific.  Please
+# uncomment and/or edit those parts as indicated.  If you don't have a
+# specific extension (e.g. Tix or BLT), leave the corresponding line
+# commented out.  (Leave the trailing backslashes in!  If you
+# experience strange errors, you may want to join all uncommented
+# lines and remove the backslashes -- the backslash interpretation is
+# done by the shell's "read" command and it may not be implemented on
+# every system.
+
+# *** Always uncomment this (leave the leading underscore in!):
+# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
+# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
+#	-L/usr/local/lib \
+# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
+#	-I/usr/local/include \
+# *** Uncomment and edit to reflect where your X11 header files are:
+#	-I/usr/X11R6/include \
+# *** Or uncomment this for Solaris:
+#	-I/usr/openwin/include \
+# *** Uncomment and edit for Tix extension only:
+#	-DWITH_TIX -ltix8.1.8.2 \
+# *** Uncomment and edit for BLT extension only:
+#	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
+# *** Uncomment and edit for PIL (TkImaging) extension only:
+#     (See http://www.pythonware.com/products/pil/ for more info)
+#	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \
+# *** Uncomment and edit for TOGL extension only:
+#	-DWITH_TOGL togl.c \
+# *** Uncomment and edit to reflect your Tcl/Tk versions:
+#	-ltk8.2 -ltcl8.2 \
+# *** Uncomment and edit to reflect where your X11 libraries are:
+#	-L/usr/X11R6/lib \
+# *** Or uncomment this for Solaris:
+#	-L/usr/openwin/lib \
+# *** Uncomment these for TOGL extension only:
+#	-lGL -lGLU -lXext -lXmu \
+# *** Uncomment for AIX:
+#	-lld \
+# *** Always uncomment this; X11 libraries to link with:
+#	-lX11
+
+# Lance Ellinghaus's syslog module
+#syslog syslogmodule.c		# syslog daemon interface
+
+
+# Curses support, requiring the System V version of curses, often
+# provided by the ncurses library.  e.g. on Linux, link with -lncurses
+# instead of -lcurses).
+#
+# First, look at Setup.config; configure may have set this for you.
+
+#_curses _cursesmodule.c -lcurses -ltermcap
+# Wrapper for the panel library that's part of ncurses and SYSV curses.
+#_curses_panel _curses_panel.c -lpanel -lncurses
+
+
+# Modules that provide persistent dictionary-like semantics.  You will
+# probably want to arrange for at least one of them to be available on
+# your machine, though none are defined by default because of library
+# dependencies.  The Python module dbm/__init__.py provides an
+# implementation independent wrapper for these; dbm/dumb.py provides
+# similar functionality (but slower of course) implemented in Python.
+
+# The standard Unix dbm module has been moved to Setup.config so that
+# it will be compiled as a shared library by default.  Compiling it as
+# a built-in module causes conflicts with the pybsddb3 module since it
+# creates a static dependency on an out-of-date version of db.so.
+#
+# First, look at Setup.config; configure may have set this for you.
+
+#_dbm _dbmmodule.c 	# dbm(3) may require -lndbm or similar
+
+# Anthony Baxter's gdbm module.  GNU dbm(3) will require -lgdbm:
+#
+# First, look at Setup.config; configure may have set this for you.
+
+#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
+
+
+# Helper module for various ascii-encoders
+#binascii binascii.c
+
+# Fred Drake's interface to the Python parser
+#parser parsermodule.c
+
+
+# Lee Busby's SIGFPE modules.
+# The library to link fpectl with is platform specific.
+# Choose *one* of the options below for fpectl:
+
+# For SGI IRIX (tested on 5.3):
+#fpectl fpectlmodule.c -lfpe
+
+# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
+# (Without the compiler you don't have -lsunmath.)
+#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
+
+# For other systems: see instructions in fpectlmodule.c.
+#fpectl fpectlmodule.c ...
+
+# Test module for fpectl.  No extra libraries needed.
+#fpetest fpetestmodule.c
+
+# Andrew Kuchling's zlib module.
+# This require zlib 1.1.3 (or later).
+# See http://www.gzip.org/zlib/
+#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
+
+# Interface to the Expat XML parser
+#
+# Expat was written by James Clark and is now maintained by a group of
+# developers on SourceForge; see www.libexpat.org for more
+# information.  The pyexpat module was written by Paul Prescod after a
+# prototype by Jack Jansen.  Source of Expat 1.95.2 is included in
+# Modules/expat/.  Usage of a system shared libexpat.so/expat.dll is
+# not advised.
+#
+# More information on Expat can be found at www.libexpat.org.
+#
+#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
+
+# Hye-Shik Chang's CJKCodecs
+
+# multibytecodec is required for all the other CJK codec modules
+#_multibytecodec cjkcodecs/multibytecodec.c
+
+#_codecs_cn cjkcodecs/_codecs_cn.c
+#_codecs_hk cjkcodecs/_codecs_hk.c
+#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
+#_codecs_jp cjkcodecs/_codecs_jp.c
+#_codecs_kr cjkcodecs/_codecs_kr.c
+#_codecs_tw cjkcodecs/_codecs_tw.c
+
+# Example -- included for reference only:
+# xx xxmodule.c
+
+# Another example -- the 'xxsubtype' module shows C-level subtyping in action
+xxsubtype xxsubtype.c

flask/lib/python3.4/config-3.4m/Setup.config

@@ -0,0 +1,13 @@
+# This file is transmogrified into Setup.config by config.status.
+
+# The purpose of this file is to conditionally enable certain modules
+# based on configure-time options.
+
+# Threading
+_thread _threadmodule.c
+
+# The signal module
+signal signalmodule.c
+
+# The rest of the modules previously listed in this file are built
+# by the setup.py script in Python 2.1 and later.

flask/lib/python3.4/config-3.4m/Setup.local

@@ -0,0 +1 @@
+# Edit this file for local setup changes

flask/lib/python3.4/config-3.4m/config.c

@@ -0,0 +1,110 @@
+/* Generated automatically from /Users/sysadmin/build/v3.4.4/Modules/config.c.in by makesetup. */
+/* -*- C -*- ***********************************************
+Copyright (c) 2000, BeOpen.com.
+Copyright (c) 1995-2000, Corporation for National Research Initiatives.
+Copyright (c) 1990-1995, Stichting Mathematisch Centrum.
+All rights reserved.
+
+See the file "Misc/COPYRIGHT" for information on usage and
+redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+******************************************************************/
+
+/* Module configuration */
+
+/* !!! !!! !!! This file is edited by the makesetup script !!! !!! !!! */
+
+/* This file contains the table of built-in modules.
+   See init_builtin() in import.c. */
+
+#include "Python.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+extern PyObject* PyInit__thread(void);
+extern PyObject* PyInit_signal(void);
+extern PyObject* PyInit_posix(void);
+extern PyObject* PyInit_errno(void);
+extern PyObject* PyInit_pwd(void);
+extern PyObject* PyInit__sre(void);
+extern PyObject* PyInit__codecs(void);
+extern PyObject* PyInit__weakref(void);
+extern PyObject* PyInit__functools(void);
+extern PyObject* PyInit__operator(void);
+extern PyObject* PyInit__collections(void);
+extern PyObject* PyInit_itertools(void);
+extern PyObject* PyInit_atexit(void);
+extern PyObject* PyInit__stat(void);
+extern PyObject* PyInit__locale(void);
+extern PyObject* PyInit__io(void);
+extern PyObject* PyInit_zipimport(void);
+extern PyObject* PyInit_faulthandler(void);
+extern PyObject* PyInit__tracemalloc(void);
+extern PyObject* PyInit__symtable(void);
+extern PyObject* PyInit_xxsubtype(void);
+/* -- ADDMODULE MARKER 1 -- */
+
+extern PyObject* PyMarshal_Init(void);
+extern PyObject* PyInit_imp(void);
+extern PyObject* PyInit_gc(void);
+extern PyObject* PyInit__ast(void);
+extern PyObject* _PyWarnings_Init(void);
+extern PyObject* PyInit__string(void);
+
+struct _inittab _PyImport_Inittab[] = {
+
+{"_thread", PyInit__thread},
+{"signal", PyInit_signal},
+{"posix", PyInit_posix},
+{"errno", PyInit_errno},
+{"pwd", PyInit_pwd},
+{"_sre", PyInit__sre},
+{"_codecs", PyInit__codecs},
+{"_weakref", PyInit__weakref},
+{"_functools", PyInit__functools},
+{"_operator", PyInit__operator},
+{"_collections", PyInit__collections},
+{"itertools", PyInit_itertools},
+{"atexit", PyInit_atexit},
+{"_stat", PyInit__stat},
+{"_locale", PyInit__locale},
+{"_io", PyInit__io},
+{"zipimport", PyInit_zipimport},
+{"faulthandler", PyInit_faulthandler},
+{"_tracemalloc", PyInit__tracemalloc},
+{"_symtable", PyInit__symtable},
+{"xxsubtype", PyInit_xxsubtype},
+/* -- ADDMODULE MARKER 2 -- */
+
+    /* This module lives in marshal.c */
+    {"marshal", PyMarshal_Init},
+
+    /* This lives in import.c */
+    {"_imp", PyInit_imp},
+
+    /* This lives in Python/Python-ast.c */
+    {"_ast", PyInit__ast},
+
+    /* These entries are here for sys.builtin_module_names */
+    {"builtins", NULL},
+    {"sys", NULL},
+
+    /* This lives in gcmodule.c */
+    {"gc", PyInit_gc},
+
+    /* This lives in _warnings.c */
+    {"_warnings", _PyWarnings_Init},
+
+    /* This lives in Objects/unicodeobject.c */
+    {"_string", PyInit__string},
+
+    /* Sentinel */
+    {0, 0}
+};
+
+
+#ifdef __cplusplus
+}
+#endif

flask/lib/python3.4/config-3.4m/config.c.in

@@ -0,0 +1,67 @@
+/* -*- C -*- ***********************************************
+Copyright (c) 2000, BeOpen.com.
+Copyright (c) 1995-2000, Corporation for National Research Initiatives.
+Copyright (c) 1990-1995, Stichting Mathematisch Centrum.
+All rights reserved.
+
+See the file "Misc/COPYRIGHT" for information on usage and
+redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+******************************************************************/
+
+/* Module configuration */
+
+/* !!! !!! !!! This file is edited by the makesetup script !!! !!! !!! */
+
+/* This file contains the table of built-in modules.
+   See init_builtin() in import.c. */
+
+#include "Python.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* -- ADDMODULE MARKER 1 -- */
+
+extern PyObject* PyMarshal_Init(void);
+extern PyObject* PyInit_imp(void);
+extern PyObject* PyInit_gc(void);
+extern PyObject* PyInit__ast(void);
+extern PyObject* _PyWarnings_Init(void);
+extern PyObject* PyInit__string(void);
+
+struct _inittab _PyImport_Inittab[] = {
+
+/* -- ADDMODULE MARKER 2 -- */
+
+    /* This module lives in marshal.c */
+    {"marshal", PyMarshal_Init},
+
+    /* This lives in import.c */
+    {"_imp", PyInit_imp},
+
+    /* This lives in Python/Python-ast.c */
+    {"_ast", PyInit__ast},
+
+    /* These entries are here for sys.builtin_module_names */
+    {"builtins", NULL},
+    {"sys", NULL},
+
+    /* This lives in gcmodule.c */
+    {"gc", PyInit_gc},
+
+    /* This lives in _warnings.c */
+    {"_warnings", _PyWarnings_Init},
+
+    /* This lives in Objects/unicodeobject.c */
+    {"_string", PyInit__string},
+
+    /* Sentinel */
+    {0, 0}
+};
+
+
+#ifdef __cplusplus
+}
+#endif

flask/lib/python3.4/config-3.4m/install-sh

@@ -0,0 +1,294 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd=$cpprog
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd=$stripprog
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "$0: no input file specified" >&2
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+
+	if [ -d "$dst" ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$src" ] || [ -d "$src" ]
+	then
+		:
+	else
+		echo "$0: $src does not exist" >&2
+		exit 1
+	fi
+
+	if [ x"$dst" = x ]
+	then
+		echo "$0: no destination specified" >&2
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d "$dst" ]
+	then
+		dst=$dst/`basename "$src"`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp=$pathcomp$1
+	shift
+
+	if [ ! -d "$pathcomp" ] ;
+        then
+		$mkdirprog "$pathcomp"
+	else
+		:
+	fi
+
+	pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd "$dst" &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		dstfile=`basename "$dst" $transformbasename |
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		:
+	fi
+
+# Make a couple of temp file names in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+	rmtmp=$dstdir/#rm.$$#
+
+# Trap to clean up temp files at exit.
+
+	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+	trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+	if [ -f "$dstdir/$dstfile" ]
+	then
+		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+		{
+		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		  (exit 1); exit
+		}
+	else
+		:
+	fi
+} &&
+
+# Now rename the file to the real destination.
+
+	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+	(exit 0); exit
+}

flask/lib/python3.4/config-3.4m/makesetup

@@ -0,0 +1,293 @@
+#! /bin/sh
+
+# Convert templates into Makefile and config.c, based on the module
+# definitions found in the file Setup.
+#
+# Usage: makesetup [-s dir] [-c file] [-m file] [Setup] ... [-n [Setup] ...]
+#
+# Options:
+# -s directory: alternative source directory (default .)
+# -l directory: library source directory (default derived from $0)
+# -c file:      alternative config.c template (default $libdir/config.c.in)
+# -c -:         don't write config.c
+# -m file:      alternative Makefile template (default ./Makefile.pre)
+# -m -:         don't write Makefile
+#
+# Remaining arguments are one or more Setup files (default ./Setup).
+# Setup files after a -n option are used for their variables, modules
+# and libraries but not for their .o files.
+#
+# See Setup.dist for a description of the format of the Setup file.
+#
+# The following edits are made:
+#
+# Copying config.c.in to config.c:
+# - insert an identifying comment at the start
+# - for each <module> mentioned in Setup before *noconfig*:
+#   + insert 'extern PyObject* PyInit_<module>(void);' before MARKER 1
+#   + insert '{"<module>", PyInit_<module>},' before MARKER 2
+#
+# Copying Makefile.pre to Makefile:
+# - insert an identifying comment at the start
+# - replace _MODOBJS_ by the list of objects from Setup (except for
+#   Setup files after a -n option)
+# - replace _MODLIBS_ by the list of libraries from Setup
+# - for each object file mentioned in Setup, append a rule
+#   '<file>.o: <file>.c; <build commands>' to the end of the Makefile
+# - for each module mentioned in Setup, append a rule
+#   which creates a shared library version to the end of the Makefile
+# - for each variable definition found in Setup, insert the definition
+#   before the comment 'Definitions added by makesetup'
+
+# Loop over command line options
+usage='
+usage: makesetup [-s srcdir] [-l libdir] [-c config.c.in] [-m Makefile.pre]
+                 [Setup] ... [-n [Setup] ...]'
+srcdir='.'
+libdir=''
+config=''
+makepre=''
+noobjects=''
+doconfig=yes
+while :
+do
+	case $1 in
+	-s)	shift; srcdir=$1; shift;;
+	-l)	shift; libdir=$1; shift;;
+	-c)	shift; config=$1; shift;;
+	-m)	shift; makepre=$1; shift;;
+	--)	shift; break;;
+	-n)	noobjects=yes;;
+	-*)	echo "$usage" 1>&2; exit 2;;
+	*)	break;;
+	esac
+done
+
+# Set default libdir and config if not set by command line
+# (Not all systems have dirname)
+case $libdir in
+'')	case $0 in
+	*/*)	libdir=`echo $0 | sed 's,/[^/]*$,,'`;;
+	*)	libdir=.;;
+	esac;;
+esac
+case $config in
+'')	config=$libdir/config.c.in;;
+esac
+case $makepre in
+'')	makepre=Makefile.pre;;
+esac
+
+# Newline for sed i and a commands
+NL='\
+'
+
+# Setup to link with extra libraries when makeing shared extensions.
+# Currently, only Cygwin needs this baggage.
+case `uname -s` in
+CYGWIN*) if test $libdir = .
+	 then
+	 	ExtraLibDir=.
+	 else
+	 	ExtraLibDir='$(LIBPL)'
+	 fi
+	 ExtraLibs="-L$ExtraLibDir -lpython\$(VERSION)";;
+esac
+
+# Main loop
+for i in ${*-Setup}
+do
+	case $i in
+	-n)	echo '*noobjects*';;
+	*)	echo '*doconfig*'; cat "$i";;
+	esac
+done |
+sed -e 's/[ 	]*#.*//' -e '/^[ 	]*$/d' |
+(
+	rulesf="@rules.$$"
+	trap 'rm -f $rulesf' 0 1 2 3
+	echo "
+# Rules appended by makedepend
+" >$rulesf
+	DEFS=
+	MODS=
+	SHAREDMODS=
+	OBJS=
+	LIBS=
+	LOCALLIBS=
+	BASELIBS=
+	while read line
+	do
+		# to handle backslashes for sh's that don't automatically
+		# continue a read when the last char is a backslash
+		while echo $line | grep '\\$' > /dev/null
+		do
+			read extraline
+			line=`echo $line| sed s/.$//`$extraline
+		done
+
+		# Output DEFS in reverse order so first definition overrides
+		case $line in
+		*=*)	DEFS="$line$NL$DEFS"; continue;;
+		'include '*)	DEFS="$line$NL$DEFS"; continue;;
+		'*noobjects*')
+			case $noobjects in
+			yes)	;;
+			*)	LOCALLIBS=$LIBS; LIBS=;;
+			esac
+			noobjects=yes;
+			continue;;
+		'*doconfig*')	doconfig=yes; continue;;
+		'*static*')	doconfig=yes; continue;;
+		'*noconfig*')	doconfig=no; continue;;
+		'*shared*')	doconfig=no; continue;;
+		esac
+		srcs=
+		cpps=
+		libs=
+		mods=
+		skip=
+		for arg in $line
+		do
+			case $skip in
+			libs)	libs="$libs $arg"; skip=; continue;;
+			cpps)	cpps="$cpps $arg"; skip=; continue;;
+			srcs)	srcs="$srcs $arg"; skip=; continue;;
+			esac
+			case $arg in
+			-framework)	libs="$libs $arg"; skip=libs;
+				        # OSX/OSXS/Darwin framework link cmd
+					;;
+			-[IDUCfF]*)	cpps="$cpps $arg";;
+			-Xcompiler)	skip=cpps;;
+			-Xlinker)	libs="$libs $arg"; skip=libs;;
+			-rpath)		libs="$libs $arg"; skip=libs;;
+			--rpath)	libs="$libs $arg"; skip=libs;;
+			-[A-Zl]*)	libs="$libs $arg";;
+			*.a)		libs="$libs $arg";;
+			*.so)		libs="$libs $arg";;
+			*.sl)		libs="$libs $arg";;
+			/*.o)		libs="$libs $arg";;
+			*.def)		libs="$libs $arg";;
+			*.o)		srcs="$srcs `basename $arg .o`.c";;
+			*.[cC])		srcs="$srcs $arg";;
+			*.m)		srcs="$srcs $arg";; # Objective-C src
+			*.cc)		srcs="$srcs $arg";;
+			*.c++)		srcs="$srcs $arg";;
+			*.cxx)		srcs="$srcs $arg";;
+			*.cpp)		srcs="$srcs $arg";;
+			\$*)		libs="$libs $arg"
+					cpps="$cpps $arg";;
+			*.*)		echo 1>&2 "bad word $arg in $line"
+					exit 1;;
+			-u)		skip=libs; libs="$libs -u";;
+			[a-zA-Z_]*)	mods="$mods $arg";;
+			*)		echo 1>&2 "bad word $arg in $line"
+					exit 1;;
+			esac
+		done
+		case $doconfig in
+		yes)
+			LIBS="$LIBS $libs"
+			MODS="$MODS $mods"
+			;;
+		esac
+		case $noobjects in
+		yes)	continue;;
+		esac
+		objs=''
+		for src in $srcs
+		do
+			case $src in
+			*.c)   obj=`basename $src .c`.o; cc='$(CC)';;
+			*.cc)  obj=`basename $src .cc`.o; cc='$(CXX)';;
+			*.c++) obj=`basename $src .c++`.o; cc='$(CXX)';;
+			*.C)   obj=`basename $src .C`.o; cc='$(CXX)';;
+			*.cxx) obj=`basename $src .cxx`.o; cc='$(CXX)';;
+			*.cpp) obj=`basename $src .cpp`.o; cc='$(CXX)';;
+			*.m)   obj=`basename $src .m`.o; cc='$(CC)';; # Obj-C
+			*)     continue;;
+			esac
+			obj="$srcdir/$obj"
+			objs="$objs $obj"
+			case $src in
+			glmodule.c) ;;
+			/*) ;;
+			\$*) ;;
+			*) src='$(srcdir)/'"$srcdir/$src";;
+			esac
+			case $doconfig in
+			no)	cc="$cc \$(CCSHARED) \$(PY_CFLAGS) \$(PY_CPPFLAGS)";;
+			*)
+				cc="$cc \$(PY_CORE_CFLAGS)";;
+			esac
+			rule="$obj: $src; $cc $cpps -c $src -o $obj"
+			echo "$rule" >>$rulesf
+		done
+		case $doconfig in
+		yes)	OBJS="$OBJS $objs";;
+		esac
+		for mod in $mods
+		do
+			file="$srcdir/$mod\$(EXT_SUFFIX)"
+			case $doconfig in
+			no)	SHAREDMODS="$SHAREDMODS $file";;
+			esac
+			rule="$file: $objs"
+			rule="$rule; \$(BLDSHARED) $objs $libs $ExtraLibs -o $file"
+			echo "$rule" >>$rulesf
+		done
+	done
+
+	case $SHAREDMODS in
+	'')	;;
+	*)	DEFS="SHAREDMODS=$SHAREDMODS$NL$DEFS";;
+	esac
+
+	case $noobjects in
+	yes)	BASELIBS=$LIBS;;
+	*)	LOCALLIBS=$LIBS;;
+	esac
+	LIBS='$(LOCALMODLIBS) $(BASEMODLIBS)'
+	DEFS="BASEMODLIBS=$BASELIBS$NL$DEFS"
+	DEFS="LOCALMODLIBS=$LOCALLIBS$NL$DEFS"
+
+	EXTDECLS=
+	INITBITS=
+	for mod in $MODS
+	do
+		EXTDECLS="${EXTDECLS}extern PyObject* PyInit_$mod(void);$NL"
+		INITBITS="${INITBITS}	{\"$mod\", PyInit_$mod},$NL"
+	done
+
+
+	case $config in
+	-)  ;;
+	*)  sed -e "
+		1i$NL/* Generated automatically from $config by makesetup. */
+		/MARKER 1/i$NL$EXTDECLS
+ 
+		/MARKER 2/i$NL$INITBITS
+
+		" $config >config.c
+	    ;;
+	esac
+
+	case $makepre in
+	-)	;;
+	*)	sedf="@sed.in.$$"
+		trap 'rm -f $sedf' 0 1 2 3
+		echo "1i\\" >$sedf
+		str="# Generated automatically from $makepre by makesetup."
+		echo "$str" >>$sedf
+		echo "s%_MODOBJS_%$OBJS%" >>$sedf
+		echo "s%_MODLIBS_%$LIBS%" >>$sedf
+		echo "/Definitions added by makesetup/a$NL$NL$DEFS" >>$sedf
+		sed -f $sedf $makepre >Makefile
+		cat $rulesf >>Makefile
+		rm -f $sedf
+	    ;;
+	esac
+
+	rm -f $rulesf
+)

flask/lib/python3.4/config-3.4m/python-config.py

@@ -0,0 +1,69 @@
+#!/Library/Frameworks/Python.framework/Versions/3.4/bin/python3.4m
+# -*- python -*-
+
+# Keep this script in sync with python-config.sh.in
+
+import getopt
+import os
+import sys
+import sysconfig
+
+valid_opts = ['prefix', 'exec-prefix', 'includes', 'libs', 'cflags',
+              'ldflags', 'extension-suffix', 'help', 'abiflags', 'configdir']
+
+def exit_with_usage(code=1):
+    print("Usage: {0} [{1}]".format(
+        sys.argv[0], '|'.join('--'+opt for opt in valid_opts)), file=sys.stderr)
+    sys.exit(code)
+
+try:
+    opts, args = getopt.getopt(sys.argv[1:], '', valid_opts)
+except getopt.error:
+    exit_with_usage()
+
+if not opts:
+    exit_with_usage()
+
+pyver = sysconfig.get_config_var('VERSION')
+getvar = sysconfig.get_config_var
+
+opt_flags = [flag for (flag, val) in opts]
+
+if '--help' in opt_flags:
+    exit_with_usage(code=0)
+
+for opt in opt_flags:
+    if opt == '--prefix':
+        print(sysconfig.get_config_var('prefix'))
+
+    elif opt == '--exec-prefix':
+        print(sysconfig.get_config_var('exec_prefix'))
+
+    elif opt in ('--includes', '--cflags'):
+        flags = ['-I' + sysconfig.get_path('include'),
+                 '-I' + sysconfig.get_path('platinclude')]
+        if opt == '--cflags':
+            flags.extend(getvar('CFLAGS').split())
+        print(' '.join(flags))
+
+    elif opt in ('--libs', '--ldflags'):
+        libs = ['-lpython' + pyver + sys.abiflags]
+        libs += getvar('LIBS').split()
+        libs += getvar('SYSLIBS').split()
+        # add the prefix/lib/pythonX.Y/config dir, but only if there is no
+        # shared library in prefix/lib/.
+        if opt == '--ldflags':
+            if not getvar('Py_ENABLE_SHARED'):
+                libs.insert(0, '-L' + getvar('LIBPL'))
+            if not getvar('PYTHONFRAMEWORK'):
+                libs.extend(getvar('LINKFORSHARED').split())
+        print(' '.join(libs))
+
+    elif opt == '--extension-suffix':
+        print(sysconfig.get_config_var('EXT_SUFFIX'))
+
+    elif opt == '--abiflags':
+        print(sys.abiflags)
+
+    elif opt == '--configdir':
+        print(sysconfig.get_config_var('LIBPL'))