Merge updates from original version

Conflicts:
	library.json
	library.properties
	src/TinyGsmClientA6.h
	src/TinyGsmClientESP8266.h
	src/TinyGsmClientM590.h
	src/TinyGsmClientSIM800.h
	src/TinyGsmClientU201.h
	src/TinyGsmClientXBee.h

README.md

@@ -26,8 +26,8 @@ This library is easy to integrate with lots of sketches, which use Ethernet or W
 ### TinyGSM is tiny
 The complete WebClient example for Arduino Uno (via Software Serial) takes little resources:
 ```
-Sketch uses 14094 bytes (43%) of program storage space. Maximum is 32256 bytes.
+Sketch uses 15022 bytes (46%) of program storage space. Maximum is 32256 bytes.
-Global variables use 625 bytes (30%) of dynamic memory, leaving 1423 bytes for local variables. Maximum is 2048 bytes.
+Global variables use 574 bytes (28%) of dynamic memory, leaving 1474 bytes for local variables. Maximum is 2048 bytes.
 ```
 Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario.  
 TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM.  
@@ -78,6 +78,7 @@ GPS/GNSS                     | ✔¹     | 🅧     | ◌¹        | 🅧   |
 - Microduino GSM
 - Adafruit FONA (Mini Cellular GSM Breakout)
 - Adafruit FONA 800/808 Shield
+- Industruino GSM
 - ... other modules, based on supported modems
 
 More modems may be supported later:

examples/BlynkClient/BlynkClient.ino

@@ -41,15 +41,8 @@
 #include <TinyGsmClient.h>
 #include <BlynkSimpleSIM800.h>
 
-// You should get Auth Token in the Blynk App.
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
-// Go to the Project Settings (nut icon).
+#define SerialMon Serial
-const char auth[] = "YourAuthToken";
-
-// Your GPRS credentials
-// Leave empty, if missing user or pass
-const char apn[]  = "YourAPN";
-const char user[] = "";
-const char pass[] = "";
 
 // Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -58,12 +51,23 @@ const char pass[] = "";
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// You should get Auth Token in the Blynk App.
+// Go to the Project Settings (nut icon).
+const char auth[] = "YourAuthToken";
+
 TinyGsm modem(SerialAT);
 
 void setup()
 {
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -72,12 +76,12 @@ void setup()
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println("Initializing modem...");
+  SerialMon.println("Initializing modem...");
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print("Modem: ");
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");

examples/FileDownload/FileDownload.ino

@@ -7,8 +7,9 @@
  * TinyGSM Getting Started guide:
  *   http://tiny.cc/tiny-gsm-readme
  *
- * ATTENTION! Downloading big files requires quite a lot
+ * ATTENTION! Downloading big files requires of knowledge of
- * of knowledge - so this is for more experienced developers.
+ * the TinyGSM internals and some modem specifics,
+ * so this is for more experienced developers.
  *
  **************************************************************/
 
@@ -22,17 +23,17 @@
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
 
-// Increase RX buffer
+// Increase RX buffer if needed
-#define TINY_GSM_RX_BUFFER 1030
+#define TINY_GSM_RX_BUFFER 1024
 
+#include <TinyGsmClient.h>
+#include <CRC32.h>
+
+// Uncomment this if you want to see all AT commands
 //#define DUMP_AT_COMMANDS
-//#define TINY_GSM_DEBUG Serial
 
-// Your GPRS credentials
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
-// Leave empty, if missing user or pass
+#define SerialMon Serial
-const char apn[]  = "YourAPN";
-const char user[] = "";
-const char pass[] = "";
 
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -41,28 +42,34 @@ const char pass[] = "";
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-#include <TinyGsmClient.h>
+
-#include <CRC32.h>
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const int  port = 80;
+
+const char resource[]  = "/TinyGSM/test_1k.bin";
+uint32_t knownCRC32    = 0x6f50d767;
+uint32_t knownFileSize = 1024;   // In case server does not send it
 
 #ifdef DUMP_AT_COMMANDS
   #include <StreamDebugger.h>
-  StreamDebugger debugger(SerialAT, Serial);
+  StreamDebugger debugger(SerialAT, SerialMon);
   TinyGsm modem(debugger);
 #else
   TinyGsm modem(SerialAT);
 #endif
+
 TinyGsmClient client(modem);
 
-const char server[] = "cdn.rawgit.com";
-const int  port     = 80;
-
-const char resource[]  = "/vshymanskyy/tinygsm/master/extras/test_1k.bin";
-uint32_t knownCRC32    = 0x6f50d767;
-uint32_t knownFileSize = 1024;   // In case server does not send it
-
 void setup() {
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -71,12 +78,12 @@ void setup() {
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println("Initializing modem...");
+  SerialMon.println(F("Initializing modem..."));
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print(F("Modem: "));
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");
@@ -85,43 +92,42 @@ void setup() {
 void printPercent(uint32_t readLength, uint32_t contentLength) {
   // If we know the total length
   if (contentLength != -1) {
-    Serial.print("\r ");
+    SerialMon.print("\r ");
-    Serial.print((100.0 * readLength) / contentLength);
+    SerialMon.print((100.0 * readLength) / contentLength);
-    Serial.print('%');
+    SerialMon.print('%');
   } else {
-    Serial.println(readLength);
+    SerialMon.println(readLength);
   }
 }
 
 void loop() {
-  Serial.print("Waiting for network...");
+  SerialMon.print(F("Waiting for network..."));
   if (!modem.waitForNetwork()) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print("Connecting to ");
+  SerialMon.print(F("Connecting to "));
-  Serial.print(apn);
+  SerialMon.print(apn);
   if (!modem.gprsConnect(apn, user, pass)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print("Connecting to ");
+  SerialMon.print(F("Connecting to "));
-  Serial.print(server);
+  SerialMon.print(server);
-
-  // if you get a connection, report back via serial:
   if (!client.connect(server, port)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
-  // Make a HTTP request:
+
+  // Make a HTTP GET request:
   client.print(String("GET ") + resource + " HTTP/1.0\r\n");
   client.print(String("Host: ") + server + "\r\n");
   client.print("Connection: close\r\n\r\n");
@@ -129,20 +135,20 @@ void loop() {
   long timeout = millis();
   while (client.available() == 0) {
     if (millis() - timeout > 5000L) {
-      Serial.println(">>> Client Timeout !");
+      SerialMon.println(F(">>> Client Timeout !"));
       client.stop();
       delay(10000L);
       return;
     }
   }
 
-  Serial.println("Reading response header");
+  SerialMon.println(F("Reading response header"));
   uint32_t contentLength = knownFileSize;
 
   while (client.available()) {
     String line = client.readStringUntil('\n');
     line.trim();
-    //Serial.println(line);    // Uncomment this to show response header
+    //SerialMon.println(line);    // Uncomment this to show response header
     line.toLowerCase();
     if (line.startsWith("content-length:")) {
       contentLength = line.substring(line.lastIndexOf(':') + 1).toInt();
@@ -151,7 +157,7 @@ void loop() {
     }
   }
 
-  Serial.println("Reading response data");
+  SerialMon.println(F("Reading response data"));
   timeout = millis();
   uint32_t readLength = 0;
   CRC32 crc;
@@ -161,7 +167,7 @@ void loop() {
   while (readLength < contentLength && client.connected() && millis() - timeout < 10000L) {
     while (client.available()) {
       uint8_t c = client.read();
-      //Serial.print((char)c);       // Uncomment this to show data
+      //SerialMon.print((char)c);       // Uncomment this to show data
       crc.update(c);
       readLength++;
       if (readLength % (contentLength / 13) == 0) {
@@ -172,22 +178,24 @@ void loop() {
   }
   printPercent(readLength, contentLength);
   timeElapsed = millis() - timeElapsed;
-  Serial.println();
+  SerialMon.println();
+
+  // Shutdown
 
   client.stop();
-  Serial.println("Server disconnected");
+  SerialMon.println(F("Server disconnected"));
 
   modem.gprsDisconnect();
-  Serial.println("GPRS disconnected");
+  SerialMon.println(F("GPRS disconnected"));
-  Serial.println();
 
   float duration = float(timeElapsed) / 1000;
 
-  Serial.print("Content-Length: ");   Serial.println(contentLength);
+  SerialMon.println();
-  Serial.print("Actually read:  ");   Serial.println(readLength);
+  SerialMon.print("Content-Length: ");   SerialMon.println(contentLength);
-  Serial.print("Calc. CRC32:    0x"); Serial.println(crc.finalize(), HEX);
+  SerialMon.print("Actually read:  ");   SerialMon.println(readLength);
-  Serial.print("Known CRC32:    0x"); Serial.println(knownCRC32, HEX);
+  SerialMon.print("Calc. CRC32:    0x"); SerialMon.println(crc.finalize(), HEX);
-  Serial.print("Duration:       ");   Serial.print(duration); Serial.println("s");
+  SerialMon.print("Known CRC32:    0x"); SerialMon.println(knownCRC32, HEX);
+  SerialMon.print("Duration:       ");   SerialMon.print(duration); SerialMon.println("s");
 
   // Do nothing forevermore
   while (true) {

examples/HttpClient/HttpClient.ino

@@ -10,6 +10,8 @@
  * TinyGSM Getting Started guide:
  *   http://tiny.cc/tiny-gsm-readme
  *
+ * For more HTTP API examples, see ArduinoHttpClient library
+ *
  **************************************************************/
 
 // Select your modem:
@@ -21,8 +23,17 @@
 // #define TINY_GSM_MODEM_M590
 // #define TINY_GSM_MODEM_ESP8266
 
-// Increase RX buffer
+// Increase RX buffer if needed
-#define TINY_GSM_RX_BUFFER 600
+//#define TINY_GSM_RX_BUFFER 512
+
+#include <TinyGsmClient.h>
+#include <ArduinoHttpClient.h>
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
+#define SerialMon Serial
 
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -31,9 +42,6 @@
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-//#define DUMP_AT_COMMANDS
-//#define TINY_GSM_DEBUG Serial
-
 
 // Your GPRS credentials
 // Leave empty, if missing user or pass
@@ -41,18 +49,14 @@ const char apn[]  = "YourAPN";
 const char user[] = "";
 const char pass[] = "";
 
-// Name of the server we want to connect to
+// Server details
-const char server[] = "cdn.rawgit.com";
+const char server[] = "vsh.pp.ua";
-const int  port     = 80;
+const char resource[] = "/TinyGSM/logo.txt";
-// Path to download (this is the bit after the hostname in the URL)
+const int  port = 80;
-const char resource[] = "/vshymanskyy/tinygsm/master/extras/logo.txt";
-
-#include <TinyGsmClient.h>
-#include <ArduinoHttpClient.h>
 
 #ifdef DUMP_AT_COMMANDS
   #include <StreamDebugger.h>
-  StreamDebugger debugger(SerialAT, Serial);
+  StreamDebugger debugger(SerialAT, SerialMon);
   TinyGsm modem(debugger);
 #else
   TinyGsm modem(SerialAT);
@@ -63,7 +67,7 @@ HttpClient http(client, server, port);
 
 void setup() {
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -72,46 +76,45 @@ void setup() {
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println("Initializing modem...");
+  SerialMon.println(F("Initializing modem..."));
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print(F("Modem: "));
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");
 }
 
 void loop() {
-  Serial.print(F("Waiting for network..."));
+  SerialMon.print(F("Waiting for network..."));
   if (!modem.waitForNetwork()) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print(F("Connecting to "));
+  SerialMon.print(F("Connecting to "));
-  Serial.print(apn);
+  SerialMon.print(apn);
   if (!modem.gprsConnect(apn, user, pass)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-
+  SerialMon.print(F("Performing HTTP GET request... "));
-  Serial.print(F("Performing HTTP GET request... "));
   int err = http.get(resource);
   if (err != 0) {
-    Serial.println("failed to connect");
+    SerialMon.println(F("failed to connect"));
     delay(10000);
     return;
   }
 
   int status = http.responseStatusCode();
-  Serial.println(status);
+  SerialMon.println(status);
   if (!status) {
     delay(10000);
     return;
@@ -120,29 +123,32 @@ void loop() {
   while (http.headerAvailable()) {
     String headerName = http.readHeaderName();
     String headerValue = http.readHeaderValue();
-    //Serial.println(headerName + " : " + headerValue);
+    //SerialMon.println(headerName + " : " + headerValue);
   }
 
   int length = http.contentLength();
   if (length >= 0) {
-    Serial.println(String("Content length is: ") + length);
+    SerialMon.print(F("Content length is: "));
+    SerialMon.println(length);
   }
   if (http.isResponseChunked()) {
-    Serial.println("This response is chunked");
+    SerialMon.println(F("The response is chunked"));
   }
 
   String body = http.responseBody();
-  Serial.println("Response:");
+  SerialMon.println(F("Response:"));
-  Serial.println(body);
+  SerialMon.println(body);
 
-  Serial.println(String("Body length is: ") + body.length());
+  SerialMon.print(F("Body length is: "));
+  SerialMon.println(body.length());
 
   // Shutdown
 
   http.stop();
+  SerialMon.println(F("Server disconnected"));
 
   modem.gprsDisconnect();
-  Serial.println("GPRS disconnected");
+  SerialMon.println(F("GPRS disconnected"));
 
   // Do nothing forevermore
   while (true) {

examples/HttpsClient/HttpsClient.ino

@@ -10,15 +10,26 @@
  * TinyGSM Getting Started guide:
  *   http://tiny.cc/tiny-gsm-readme
  *
+ * SSL/TLS is currently supported only with SIM8xx series
+ * For more HTTP API examples, see ArduinoHttpClient library
+ *
  **************************************************************/
 
-// Select your modem
+// Select your modem:
-// SSL/TLS is currently supported only with SIM8xx series
 #define TINY_GSM_MODEM_SIM800
-//#define TINY_GSM_MODEM_SIM808
+// #define TINY_GSM_MODEM_SIM808
 
-// Increase RX buffer
+// Increase RX buffer if needed
-#define TINY_GSM_RX_BUFFER 64
+//#define TINY_GSM_RX_BUFFER 512
+
+#include <TinyGsmClient.h>
+#include <ArduinoHttpClient.h>
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
+#define SerialMon Serial
 
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -27,9 +38,6 @@
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-//#define DUMP_AT_COMMANDS
-//#define TINY_GSM_DEBUG Serial
-
 
 // Your GPRS credentials
 // Leave empty, if missing user or pass
@@ -37,18 +45,14 @@ const char apn[]  = "YourAPN";
 const char user[] = "";
 const char pass[] = "";
 
-// Name of the server we want to connect to
+// Server details
-const char server[] = "cdn.rawgit.com";
+const char server[] = "vsh.pp.ua";
-const int  port     = 443;
+const char resource[] = "/TinyGSM/logo.txt";
-// Path to download (this is the bit after the hostname in the URL)
+const int  port = 443;
-const char resource[] = "/vshymanskyy/tinygsm/master/extras/logo.txt";
-
-#include <TinyGsmClient.h>
-#include <ArduinoHttpClient.h>
 
 #ifdef DUMP_AT_COMMANDS
   #include <StreamDebugger.h>
-  StreamDebugger debugger(SerialAT, Serial);
+  StreamDebugger debugger(SerialAT, SerialMon);
   TinyGsm modem(debugger);
 #else
   TinyGsm modem(SerialAT);
@@ -59,7 +63,7 @@ HttpClient http(client, server, port);
 
 void setup() {
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -68,53 +72,51 @@ void setup() {
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println("Initializing modem...");
+  SerialMon.println(F("Initializing modem..."));
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print(F("Modem: "));
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");
+
+  if (!modem.hasSSL()) {
+    SerialMon.println(F("SSL is not supported by this modem"));
+    while(true) { delay(1000); }
+  }
 }
 
 void loop() {
-  if (!modem.hasSSL()) {
+  SerialMon.print(F("Waiting for network..."));
-    Serial.println("SSL is not supported by this modem");
-    delay(10000);
-    return;
-  }
-
-  Serial.print(F("Waiting for network..."));
   if (!modem.waitForNetwork()) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print(F("Connecting to "));
+  SerialMon.print(F("Connecting to "));
-  Serial.print(apn);
+  SerialMon.print(apn);
   if (!modem.gprsConnect(apn, user, pass)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-
+  SerialMon.print(F("Performing HTTPS GET request... "));
-  Serial.print(F("Performing HTTP GET request... "));
   http.connectionKeepAlive(); // Currently, this is needed for HTTPS
   int err = http.get(resource);
   if (err != 0) {
-    Serial.println("failed to connect");
+    SerialMon.println(F("failed to connect"));
     delay(10000);
     return;
   }
 
   int status = http.responseStatusCode();
-  Serial.println(status);
+  SerialMon.println(status);
   if (!status) {
     delay(10000);
     return;
@@ -123,29 +125,32 @@ void loop() {
   while (http.headerAvailable()) {
     String headerName = http.readHeaderName();
     String headerValue = http.readHeaderValue();
-    //Serial.println(headerName + " : " + headerValue);
+    //SerialMon.println(headerName + " : " + headerValue);
   }
 
   int length = http.contentLength();
   if (length >= 0) {
-    Serial.println(String("Content length is: ") + length);
+    SerialMon.print(F("Content length is: "));
+    SerialMon.println(length);
   }
   if (http.isResponseChunked()) {
-    Serial.println("This response is chunked");
+    SerialMon.println(F("The response is chunked"));
   }
 
   String body = http.responseBody();
-  Serial.println("Response:");
+  SerialMon.println(F("Response:"));
-  Serial.println(body);
+  SerialMon.println(body);
 
-  Serial.println(String("Body length is: ") + body.length());
+  SerialMon.print(F("Body length is: "));
+  SerialMon.println(body.length());
 
   // Shutdown
 
   http.stop();
+  SerialMon.println(F("Server disconnected"));
 
   modem.gprsDisconnect();
-  Serial.println("GPRS disconnected");
+  SerialMon.println(F("GPRS disconnected"));
 
   // Do nothing forevermore
   while (true) {

examples/MqttClient/MqttClient.ino

@@ -1,12 +1,14 @@
 /**************************************************************
  *
  * For this example, you need to install PubSubClient library:
- *   https://github.com/knolleary/pubsubclient/releases/latest
+ *   https://github.com/knolleary/pubsubclient
  *   or from http://librarymanager/all#PubSubClient
  *
  * TinyGSM Getting Started guide:
  *   http://tiny.cc/tiny-gsm-readme
  *
+ * For more MQTT examples, see PubSubClient library
+ *
  **************************************************************
  * Use Mosquitto client tools to work with MQTT
  *   Ubuntu/Linux: sudo apt-get install mosquitto-clients
@@ -20,7 +22,7 @@
  * You can use Node-RED for wiring together MQTT-enabled devices
  *   https://nodered.org/
  * Also, take a look at these additional Node-RED modules:
- *   node-red-contrib-blynk-websockets
+ *   node-red-contrib-blynk-ws
  *   node-red-dashboard
  *
  **************************************************************/
@@ -38,11 +40,8 @@
 #include <TinyGsmClient.h>
 #include <PubSubClient.h>
 
-// Your GPRS credentials
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
-// Leave empty, if missing user or pass
+#define SerialMon Serial
-const char apn[]  = "YourAPN";
-const char user[] = "";
-const char pass[] = "";
 
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -51,16 +50,24 @@ const char pass[] = "";
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-TinyGsm modem(SerialAT);
-TinyGsmClient client(modem);
-PubSubClient mqtt(client);
 
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// MQTT details
 const char* broker = "test.mosquitto.org";
 
 const char* topicLed = "GsmClientTest/led";
 const char* topicInit = "GsmClientTest/init";
 const char* topicLedStatus = "GsmClientTest/ledStatus";
 
+TinyGsm modem(SerialAT);
+TinyGsmClient client(modem);
+PubSubClient mqtt(client);
+
 #define LED_PIN 13
 int ledStatus = LOW;
 
@@ -70,7 +77,7 @@ void setup() {
   pinMode(LED_PIN, OUTPUT);
 
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -79,30 +86,30 @@ void setup() {
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println("Initializing modem...");
+  SerialMon.println("Initializing modem...");
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print("Modem: ");
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");
 
-  Serial.print("Waiting for network...");
+  SerialMon.print("Waiting for network...");
   if (!modem.waitForNetwork()) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     while (true);
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print("Connecting to ");
+  SerialMon.print("Connecting to ");
-  Serial.print(apn);
+  SerialMon.print(apn);
   if (!modem.gprsConnect(apn, user, pass)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     while (true);
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
   // MQTT Broker setup
   mqtt.setServer(broker, 1883);
@@ -110,13 +117,13 @@ void setup() {
 }
 
 boolean mqttConnect() {
-  Serial.print("Connecting to ");
+  SerialMon.print("Connecting to ");
-  Serial.print(broker);
+  SerialMon.print(broker);
   if (!mqtt.connect("GsmClientTest")) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     return false;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
   mqtt.publish(topicInit, "GsmClientTest started");
   mqtt.subscribe(topicLed);
   return mqtt.connected();
@@ -140,11 +147,11 @@ void loop() {
 }
 
 void mqttCallback(char* topic, byte* payload, unsigned int len) {
-  Serial.print("Message arrived [");
+  SerialMon.print("Message arrived [");
-  Serial.print(topic);
+  SerialMon.print(topic);
-  Serial.print("]: ");
+  SerialMon.print("]: ");
-  Serial.write(payload, len);
+  SerialMon.write(payload, len);
-  Serial.println();
+  SerialMon.println();
 
   // Only proceed if incoming message's topic matches
   if (String(topic) == topicLed) {

examples/WebClient/WebClient.ino

@@ -17,13 +17,16 @@
 // #define TINY_GSM_MODEM_M590
 // #define TINY_GSM_MODEM_ESP8266
 
+// Increase RX buffer if needed
+//#define TINY_GSM_RX_BUFFER 512
+
 #include <TinyGsmClient.h>
 
-// Your GPRS credentials
+// Uncomment this if you want to see all AT commands
-// Leave empty, if missing user or pass
+//#define DUMP_AT_COMMANDS
-const char apn[]  = "YourAPN";
+
-const char user[] = "";
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
-const char pass[] = "";
+#define SerialMon Serial
 
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
@@ -32,17 +35,31 @@ const char pass[] = "";
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-TinyGsm modem(SerialAT);
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+const int  port = 80;
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
 TinyGsmClient client(modem);
 
-const char server[] = "cdn.rawgit.com";
-const char resource[] = "/vshymanskyy/tinygsm/master/extras/logo.txt";
-
-const int port = 80;
-
 void setup() {
   // Set console baud rate
-  Serial.begin(115200);
+  SerialMon.begin(115200);
   delay(10);
 
   // Set GSM module baud rate
@@ -51,43 +68,43 @@ void setup() {
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  Serial.println(F("Initializing modem..."));
+  SerialMon.println(F("Initializing modem..."));
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  Serial.print("Modem: ");
+  SerialMon.print(F("Modem: "));
-  Serial.println(modemInfo);
+  SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
   //modem.simUnlock("1234");
 }
 
 void loop() {
-  Serial.print(F("Waiting for network..."));
+  SerialMon.print(F("Waiting for network..."));
   if (!modem.waitForNetwork()) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print(F("Connecting to "));
+  SerialMon.print(F("Connecting to "));
-  Serial.print(apn);
+  SerialMon.print(apn);
   if (!modem.gprsConnect(apn, user, pass)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
-  Serial.print(F("Connecting to "));
+  SerialMon.print(F("Connecting to "));
-  Serial.print(server);
+  SerialMon.print(server);
   if (!client.connect(server, port)) {
-    Serial.println(" fail");
+    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  Serial.println(" OK");
+  SerialMon.println(" OK");
 
   // Make a HTTP GET request:
   client.print(String("GET ") + resource + " HTTP/1.0\r\n");
@@ -99,17 +116,19 @@ void loop() {
     // Print available data
     while (client.available()) {
       char c = client.read();
-      Serial.print(c);
+      SerialMon.print(c);
       timeout = millis();
     }
   }
-  Serial.println();
+  SerialMon.println();
+
+  // Shutdown
 
   client.stop();
-  Serial.println("Server disconnected");
+  SerialMon.println(F("Server disconnected"));
 
   modem.gprsDisconnect();
-  Serial.println("GPRS disconnected");
+  SerialMon.println(F("GPRS disconnected"));
 
   // Do nothing forevermore
   while (true) {

examples/more/Industruino/Industruino.ino

@@ -0,0 +1,160 @@
+/**************************************************************
+ *
+ * This sketch connects to a website and downloads a page.
+ * It can be used to perform HTTP/RESTful API calls.
+ *
+ * For this example, you need to install ArduinoHttpClient library:
+ *   https://github.com/arduino-libraries/ArduinoHttpClient
+ *   or from http://librarymanager/all#ArduinoHttpClient
+ *
+ * TinyGSM Getting Started guide:
+ *   http://tiny.cc/tiny-gsm-readme
+ *
+ * For more HTTP API examples, see ArduinoHttpClient library
+ *
+ **************************************************************/
+
+// Industruino uses SIM800H
+#define TINY_GSM_MODEM_SIM800
+
+// Increase RX buffer if needed
+//#define TINY_GSM_RX_BUFFER 512
+
+#include <TinyGsmClient.h>
+#include <ArduinoHttpClient.h>
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+// Uncomment this if you want to use SSL
+//#define USE_SSL
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon SerialUSB
+
+// Select Serial1 or Serial depending on your module configuration
+#define SerialAT Serial1
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
+#ifdef USE_SSL
+  TinyGsmClientSecure client(modem);
+  HttpClient http(client, server, 443);
+#else
+  TinyGsmClient client(modem);
+  HttpClient http(client, server, 80);
+#endif
+
+void setup() {
+  // Turn on modem with 1 second pulse on D6
+  pinMode(6, OUTPUT);
+  digitalWrite(6, HIGH);
+  delay(1000);
+  digitalWrite(6, LOW);
+
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialAT.begin(115200);
+  delay(3000);
+
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  SerialMon.println(F("Initializing modem..."));
+  modem.restart();
+
+  String modemInfo = modem.getModemInfo();
+  SerialMon.print(F("Modem: "));
+  SerialMon.println(modemInfo);
+
+  // Unlock your SIM card with a PIN
+  //modem.simUnlock("1234");
+}
+
+void loop() {
+  SerialMon.print(F("Waiting for network..."));
+  if (!modem.waitForNetwork()) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(apn);
+  if (!modem.gprsConnect(apn, user, pass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Performing HTTP GET request... "));
+  int err = http.get(resource);
+  if (err != 0) {
+    SerialMon.println(F("failed to connect"));
+    delay(10000);
+    return;
+  }
+
+  int status = http.responseStatusCode();
+  SerialMon.println(status);
+  if (!status) {
+    delay(10000);
+    return;
+  }
+
+  while (http.headerAvailable()) {
+    String headerName = http.readHeaderName();
+    String headerValue = http.readHeaderValue();
+    //SerialMon.println(headerName + " : " + headerValue);
+  }
+
+  int length = http.contentLength();
+  if (length >= 0) {
+    SerialMon.print(F("Content length is: "));
+    SerialMon.println(length);
+  }
+  if (http.isResponseChunked()) {
+    SerialMon.println(F("The response is chunked"));
+  }
+
+  String body = http.responseBody();
+  SerialMon.println(F("Response:"));
+  SerialMon.println(body);
+
+  SerialMon.print(F("Body length is: "));
+  SerialMon.println(body.length());
+
+  // Shutdown
+
+  http.stop();
+  SerialMon.println(F("Server disconnected"));
+
+  modem.gprsDisconnect();
+  SerialMon.println(F("GPRS disconnected"));
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}
+

examples/more/SIM800_SslSetCert/COMODORSACertificationAuthority.h

@@ -0,0 +1,36 @@
+const char cert[] PROGMEM =
+"-----BEGIN CERTIFICATE-----\n"
+"MIIF2DCCA8CgAwIBAgIQTKr5yttjb+Af907YWwOGnTANBgkqhkiG9w0BAQwFADCB\n"
+"hTELMAkGA1UEBhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4G\n"
+"A1UEBxMHU2FsZm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxKzApBgNV\n"
+"BAMTIkNPTU9ETyBSU0EgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkwHhcNMTAwMTE5\n"
+"MDAwMDAwWhcNMzgwMTE4MjM1OTU5WjCBhTELMAkGA1UEBhMCR0IxGzAZBgNVBAgT\n"
+"EkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2FsZm9yZDEaMBgGA1UEChMR\n"
+"Q09NT0RPIENBIExpbWl0ZWQxKzApBgNVBAMTIkNPTU9ETyBSU0EgQ2VydGlmaWNh\n"
+"dGlvbiBBdXRob3JpdHkwggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoICAQCR\n"
+"6FSS0gpWsawNJN3Fz0RndJkrN6N9I3AAcbxT38T6KhKPS38QVr2fcHK3YX/JSw8X\n"
+"pz3jsARh7v8Rl8f0hj4K+j5c+ZPmNHrZFGvnnLOFoIJ6dq9xkNfs/Q36nGz637CC\n"
+"9BR++b7Epi9Pf5l/tfxnQ3K9DADWietrLNPtj5gcFKt+5eNu/Nio5JIk2kNrYrhV\n"
+"/erBvGy2i/MOjZrkm2xpmfh4SDBF1a3hDTxFYPwyllEnvGfDyi62a+pGx8cgoLEf\n"
+"Zd5ICLqkTqnyg0Y3hOvozIFIQ2dOciqbXL1MGyiKXCJ7tKuY2e7gUYPDCUZObT6Z\n"
+"+pUX2nwzV0E8jVHtC7ZcryxjGt9XyD+86V3Em69FmeKjWiS0uqlWPc9vqv9JWL7w\n"
+"qP/0uK3pN/u6uPQLOvnoQ0IeidiEyxPx2bvhiWC4jChWrBQdnArncevPDt09qZah\n"
+"SL0896+1DSJMwBGB7FY79tOi4lu3sgQiUpWAk2nojkxl8ZEDLXB0AuqLZxUpaVIC\n"
+"u9ffUGpVRr+goyhhf3DQw6KqLCGqR84onAZFdr+CGCe01a60y1Dma/RMhnEw6abf\n"
+"Fobg2P9A3fvQQoh/ozM6LlweQRGBY84YcWsr7KaKtzFcOmpH4MN5WdYgGq/yapiq\n"
+"crxXStJLnbsQ/LBMQeXtHT1eKJ2czL+zUdqnR+WEUwIDAQABo0IwQDAdBgNVHQ4E\n"
+"FgQUu69+Aj36pvE8hI6t7jiY7NkyMtQwDgYDVR0PAQH/BAQDAgEGMA8GA1UdEwEB\n"
+"/wQFMAMBAf8wDQYJKoZIhvcNAQEMBQADggIBAArx1UaEt65Ru2yyTUEUAJNMnMvl\n"
+"wFTPoCWOAvn9sKIN9SCYPBMtrFaisNZ+EZLpLrqeLppysb0ZRGxhNaKatBYSaVqM\n"
+"4dc+pBroLwP0rmEdEBsqpIt6xf4FpuHA1sj+nq6PK7o9mfjYcwlYRm6mnPTXJ9OV\n"
+"2jeDchzTc+CiR5kDOF3VSXkAKRzH7JsgHAckaVd4sjn8OoSgtZx8jb8uk2Intzna\n"
+"FxiuvTwJaP+EmzzV1gsD41eeFPfR60/IvYcjt7ZJQ3mFXLrrkguhxuhoqEwWsRqZ\n"
+"CuhTLJK7oQkYdQxlqHvLI7cawiiFwxv/0Cti76R7CZGYZ4wUAc1oBmpjIXUDgIiK\n"
+"boHGhfKppC3n9KUkEEeDys30jXlYsQab5xoq2Z0B15R97QNKyvDb6KkBPvVWmcke\n"
+"jkk9u+UJueBPSZI9FoJAzMxZxuY67RIuaTxslbH9qh17f4a+Hg4yRvv7E491f0yL\n"
+"S0Zj/gA0QHDBw7mh3aZw4gSzQbzpgJHqZJx64SIDqZxubw5lT2yHh17zbqD5daWb\n"
+"QOhTsiedSrnAdyGN/4fy3ryM7xfft0kL0fJuMAsaDk527RH89elWsn2/x20Kk4yl\n"
+"0MC2Hb46TpSi125sC8KKfPog88Tk5c0NqMuRkrF8hey1FGlmDoLnzc7ILaZRfyHB\n"
+"NVOFBkpdn627G190\n"
+"-----END CERTIFICATE-----\n";
+

examples/more/SIM800_SslSetCert/DSTRootCAX3.der.h

@@ -0,0 +1,74 @@
+const char cert[] PROGMEM =
+{
+  0x30, 0x82, 0x03, 0x4a, 0x30, 0x82, 0x02, 0x32, 0xa0, 0x03, 0x02, 0x01,
+  0x02, 0x02, 0x10, 0x44, 0xaf, 0xb0, 0x80, 0xd6, 0xa3, 0x27, 0xba, 0x89,
+  0x30, 0x39, 0x86, 0x2e, 0xf8, 0x40, 0x6b, 0x30, 0x0d, 0x06, 0x09, 0x2a,
+  0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x05, 0x05, 0x00, 0x30, 0x3f,
+  0x31, 0x24, 0x30, 0x22, 0x06, 0x03, 0x55, 0x04, 0x0a, 0x13, 0x1b, 0x44,
+  0x69, 0x67, 0x69, 0x74, 0x61, 0x6c, 0x20, 0x53, 0x69, 0x67, 0x6e, 0x61,
+  0x74, 0x75, 0x72, 0x65, 0x20, 0x54, 0x72, 0x75, 0x73, 0x74, 0x20, 0x43,
+  0x6f, 0x2e, 0x31, 0x17, 0x30, 0x15, 0x06, 0x03, 0x55, 0x04, 0x03, 0x13,
+  0x0e, 0x44, 0x53, 0x54, 0x20, 0x52, 0x6f, 0x6f, 0x74, 0x20, 0x43, 0x41,
+  0x20, 0x58, 0x33, 0x30, 0x1e, 0x17, 0x0d, 0x30, 0x30, 0x30, 0x39, 0x33,
+  0x30, 0x32, 0x31, 0x31, 0x32, 0x31, 0x39, 0x5a, 0x17, 0x0d, 0x32, 0x31,
+  0x30, 0x39, 0x33, 0x30, 0x31, 0x34, 0x30, 0x31, 0x31, 0x35, 0x5a, 0x30,
+  0x3f, 0x31, 0x24, 0x30, 0x22, 0x06, 0x03, 0x55, 0x04, 0x0a, 0x13, 0x1b,
+  0x44, 0x69, 0x67, 0x69, 0x74, 0x61, 0x6c, 0x20, 0x53, 0x69, 0x67, 0x6e,
+  0x61, 0x74, 0x75, 0x72, 0x65, 0x20, 0x54, 0x72, 0x75, 0x73, 0x74, 0x20,
+  0x43, 0x6f, 0x2e, 0x31, 0x17, 0x30, 0x15, 0x06, 0x03, 0x55, 0x04, 0x03,
+  0x13, 0x0e, 0x44, 0x53, 0x54, 0x20, 0x52, 0x6f, 0x6f, 0x74, 0x20, 0x43,
+  0x41, 0x20, 0x58, 0x33, 0x30, 0x82, 0x01, 0x22, 0x30, 0x0d, 0x06, 0x09,
+  0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x01, 0x05, 0x00, 0x03,
+  0x82, 0x01, 0x0f, 0x00, 0x30, 0x82, 0x01, 0x0a, 0x02, 0x82, 0x01, 0x01,
+  0x00, 0xdf, 0xaf, 0xe9, 0x97, 0x50, 0x08, 0x83, 0x57, 0xb4, 0xcc, 0x62,
+  0x65, 0xf6, 0x90, 0x82, 0xec, 0xc7, 0xd3, 0x2c, 0x6b, 0x30, 0xca, 0x5b,
+  0xec, 0xd9, 0xc3, 0x7d, 0xc7, 0x40, 0xc1, 0x18, 0x14, 0x8b, 0xe0, 0xe8,
+  0x33, 0x76, 0x49, 0x2a, 0xe3, 0x3f, 0x21, 0x49, 0x93, 0xac, 0x4e, 0x0e,
+  0xaf, 0x3e, 0x48, 0xcb, 0x65, 0xee, 0xfc, 0xd3, 0x21, 0x0f, 0x65, 0xd2,
+  0x2a, 0xd9, 0x32, 0x8f, 0x8c, 0xe5, 0xf7, 0x77, 0xb0, 0x12, 0x7b, 0xb5,
+  0x95, 0xc0, 0x89, 0xa3, 0xa9, 0xba, 0xed, 0x73, 0x2e, 0x7a, 0x0c, 0x06,
+  0x32, 0x83, 0xa2, 0x7e, 0x8a, 0x14, 0x30, 0xcd, 0x11, 0xa0, 0xe1, 0x2a,
+  0x38, 0xb9, 0x79, 0x0a, 0x31, 0xfd, 0x50, 0xbd, 0x80, 0x65, 0xdf, 0xb7,
+  0x51, 0x63, 0x83, 0xc8, 0xe2, 0x88, 0x61, 0xea, 0x4b, 0x61, 0x81, 0xec,
+  0x52, 0x6b, 0xb9, 0xa2, 0xe2, 0x4b, 0x1a, 0x28, 0x9f, 0x48, 0xa3, 0x9e,
+  0x0c, 0xda, 0x09, 0x8e, 0x3e, 0x17, 0x2e, 0x1e, 0xdd, 0x20, 0xdf, 0x5b,
+  0xc6, 0x2a, 0x8a, 0xab, 0x2e, 0xbd, 0x70, 0xad, 0xc5, 0x0b, 0x1a, 0x25,
+  0x90, 0x74, 0x72, 0xc5, 0x7b, 0x6a, 0xab, 0x34, 0xd6, 0x30, 0x89, 0xff,
+  0xe5, 0x68, 0x13, 0x7b, 0x54, 0x0b, 0xc8, 0xd6, 0xae, 0xec, 0x5a, 0x9c,
+  0x92, 0x1e, 0x3d, 0x64, 0xb3, 0x8c, 0xc6, 0xdf, 0xbf, 0xc9, 0x41, 0x70,
+  0xec, 0x16, 0x72, 0xd5, 0x26, 0xec, 0x38, 0x55, 0x39, 0x43, 0xd0, 0xfc,
+  0xfd, 0x18, 0x5c, 0x40, 0xf1, 0x97, 0xeb, 0xd5, 0x9a, 0x9b, 0x8d, 0x1d,
+  0xba, 0xda, 0x25, 0xb9, 0xc6, 0xd8, 0xdf, 0xc1, 0x15, 0x02, 0x3a, 0xab,
+  0xda, 0x6e, 0xf1, 0x3e, 0x2e, 0xf5, 0x5c, 0x08, 0x9c, 0x3c, 0xd6, 0x83,
+  0x69, 0xe4, 0x10, 0x9b, 0x19, 0x2a, 0xb6, 0x29, 0x57, 0xe3, 0xe5, 0x3d,
+  0x9b, 0x9f, 0xf0, 0x02, 0x5d, 0x02, 0x03, 0x01, 0x00, 0x01, 0xa3, 0x42,
+  0x30, 0x40, 0x30, 0x0f, 0x06, 0x03, 0x55, 0x1d, 0x13, 0x01, 0x01, 0xff,
+  0x04, 0x05, 0x30, 0x03, 0x01, 0x01, 0xff, 0x30, 0x0e, 0x06, 0x03, 0x55,
+  0x1d, 0x0f, 0x01, 0x01, 0xff, 0x04, 0x04, 0x03, 0x02, 0x01, 0x06, 0x30,
+  0x1d, 0x06, 0x03, 0x55, 0x1d, 0x0e, 0x04, 0x16, 0x04, 0x14, 0xc4, 0xa7,
+  0xb1, 0xa4, 0x7b, 0x2c, 0x71, 0xfa, 0xdb, 0xe1, 0x4b, 0x90, 0x75, 0xff,
+  0xc4, 0x15, 0x60, 0x85, 0x89, 0x10, 0x30, 0x0d, 0x06, 0x09, 0x2a, 0x86,
+  0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x05, 0x05, 0x00, 0x03, 0x82, 0x01,
+  0x01, 0x00, 0xa3, 0x1a, 0x2c, 0x9b, 0x17, 0x00, 0x5c, 0xa9, 0x1e, 0xee,
+  0x28, 0x66, 0x37, 0x3a, 0xbf, 0x83, 0xc7, 0x3f, 0x4b, 0xc3, 0x09, 0xa0,
+  0x95, 0x20, 0x5d, 0xe3, 0xd9, 0x59, 0x44, 0xd2, 0x3e, 0x0d, 0x3e, 0xbd,
+  0x8a, 0x4b, 0xa0, 0x74, 0x1f, 0xce, 0x10, 0x82, 0x9c, 0x74, 0x1a, 0x1d,
+  0x7e, 0x98, 0x1a, 0xdd, 0xcb, 0x13, 0x4b, 0xb3, 0x20, 0x44, 0xe4, 0x91,
+  0xe9, 0xcc, 0xfc, 0x7d, 0xa5, 0xdb, 0x6a, 0xe5, 0xfe, 0xe6, 0xfd, 0xe0,
+  0x4e, 0xdd, 0xb7, 0x00, 0x3a, 0xb5, 0x70, 0x49, 0xaf, 0xf2, 0xe5, 0xeb,
+  0x02, 0xf1, 0xd1, 0x02, 0x8b, 0x19, 0xcb, 0x94, 0x3a, 0x5e, 0x48, 0xc4,
+  0x18, 0x1e, 0x58, 0x19, 0x5f, 0x1e, 0x02, 0x5a, 0xf0, 0x0c, 0xf1, 0xb1,
+  0xad, 0xa9, 0xdc, 0x59, 0x86, 0x8b, 0x6e, 0xe9, 0x91, 0xf5, 0x86, 0xca,
+  0xfa, 0xb9, 0x66, 0x33, 0xaa, 0x59, 0x5b, 0xce, 0xe2, 0xa7, 0x16, 0x73,
+  0x47, 0xcb, 0x2b, 0xcc, 0x99, 0xb0, 0x37, 0x48, 0xcf, 0xe3, 0x56, 0x4b,
+  0xf5, 0xcf, 0x0f, 0x0c, 0x72, 0x32, 0x87, 0xc6, 0xf0, 0x44, 0xbb, 0x53,
+  0x72, 0x6d, 0x43, 0xf5, 0x26, 0x48, 0x9a, 0x52, 0x67, 0xb7, 0x58, 0xab,
+  0xfe, 0x67, 0x76, 0x71, 0x78, 0xdb, 0x0d, 0xa2, 0x56, 0x14, 0x13, 0x39,
+  0x24, 0x31, 0x85, 0xa2, 0xa8, 0x02, 0x5a, 0x30, 0x47, 0xe1, 0xdd, 0x50,
+  0x07, 0xbc, 0x02, 0x09, 0x90, 0x00, 0xeb, 0x64, 0x63, 0x60, 0x9b, 0x16,
+  0xbc, 0x88, 0xc9, 0x12, 0xe6, 0xd2, 0x7d, 0x91, 0x8b, 0xf9, 0x3d, 0x32,
+  0x8d, 0x65, 0xb4, 0xe9, 0x7c, 0xb1, 0x57, 0x76, 0xea, 0xc5, 0xb6, 0x28,
+  0x39, 0xbf, 0x15, 0x65, 0x1c, 0xc8, 0xf6, 0x77, 0x96, 0x6a, 0x0a, 0x8d,
+  0x77, 0x0b, 0xd8, 0x91, 0x0b, 0x04, 0x8e, 0x07, 0xdb, 0x29, 0xb6, 0x0a,
+  0xee, 0x9d, 0x82, 0x35, 0x35, 0x10
+};

examples/more/SIM800_SslSetCert/DSTRootCAX3.h

@@ -0,0 +1,22 @@
+const char cert[] PROGMEM =
+"-----BEGIN CERTIFICATE-----\n"
+"MIIDSjCCAjKgAwIBAgIQRK+wgNajJ7qJMDmGLvhAazANBgkqhkiG9w0BAQUFADA/\n"
+"MSQwIgYDVQQKExtEaWdpdGFsIFNpZ25hdHVyZSBUcnVzdCBDby4xFzAVBgNVBAMT\n"
+"DkRTVCBSb290IENBIFgzMB4XDTAwMDkzMDIxMTIxOVoXDTIxMDkzMDE0MDExNVow\n"
+"PzEkMCIGA1UEChMbRGlnaXRhbCBTaWduYXR1cmUgVHJ1c3QgQ28uMRcwFQYDVQQD\n"
+"Ew5EU1QgUm9vdCBDQSBYMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEB\n"
+"AN+v6ZdQCINXtMxiZfaQguzH0yxrMMpb7NnDfcdAwRgUi+DoM3ZJKuM/IUmTrE4O\n"
+"rz5Iy2Xu/NMhD2XSKtkyj4zl93ewEnu1lcCJo6m67XMuegwGMoOifooUMM0RoOEq\n"
+"OLl5CjH9UL2AZd+3UWODyOKIYepLYYHsUmu5ouJLGiifSKOeDNoJjj4XLh7dIN9b\n"
+"xiqKqy69cK3FCxolkHRyxXtqqzTWMIn/5WgTe1QLyNau7Fqckh49ZLOMxt+/yUFw\n"
+"7BZy1SbsOFU5Q9D8/RhcQPGX69Wam40dutolucbY38EVAjqr2m7xPi71XAicPNaD\n"
+"aeQQmxkqtilX4+U9m5/wAl0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNV\n"
+"HQ8BAf8EBAMCAQYwHQYDVR0OBBYEFMSnsaR7LHH62+FLkHX/xBVghYkQMA0GCSqG\n"
+"SIb3DQEBBQUAA4IBAQCjGiybFwBcqR7uKGY3Or+Dxz9LwwmglSBd49lZRNI+DT69\n"
+"ikugdB/OEIKcdBodfpga3csTS7MgROSR6cz8faXbauX+5v3gTt23ADq1cEmv8uXr\n"
+"AvHRAosZy5Q6XkjEGB5YGV8eAlrwDPGxrancWYaLbumR9YbK+rlmM6pZW87ipxZz\n"
+"R8srzJmwN0jP41ZL9c8PDHIyh8bwRLtTcm1D9SZImlJnt1ir/md2cXjbDaJWFBM5\n"
+"JDGFoqgCWjBH4d1QB7wCCZAA62RjYJsWvIjJEubSfZGL+T0yjWW06XyxV3bqxbYo\n"
+"Ob8VZRzI9neWagqNdwvYkQsEjgfbKbYK7p2CNTUQ\n"
+"-----END CERTIFICATE-----\n";
+

examples/more/SIM800_SslSetCert/SIM800_SslSetCert.ino

@@ -0,0 +1,97 @@
+/**************************************************************
+ *
+ * This sketch uploads SSL certificates to the SIM8xx
+ *
+ * TinyGSM Getting Started guide:
+ *   http://tiny.cc/tiny-gsm-readme
+ *
+ **************************************************************/
+
+// This example is specific to SIM8xx
+#define TINY_GSM_MODEM_SIM800
+
+// Select your certificate:
+#include "DSTRootCAX3.h"
+//#include "DSTRootCAX3.der.h"
+//#include "COMODORSACertificationAuthority.h"
+
+// Select the file you want to write into
+// (the file is stored on the modem)
+#define CERT_FILE "C:\\USER\\CERT.CRT"
+
+#include <TinyGsmClient.h>
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon Serial
+
+// Use Hardware Serial for AT commands
+#define SerialAT Serial1
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
+void setup() {
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialAT.begin(115200);
+  delay(3000);
+
+  SerialMon.println(F("Initializing modem..."));
+  modem.init();
+
+  modem.sendAT(GF("+FSCREATE=" CERT_FILE));
+  if (modem.waitResponse() != 1) return;
+
+  const int cert_size = sizeof(cert);
+
+  modem.sendAT(GF("+FSWRITE=" CERT_FILE ",0,"), cert_size, GF(",10"));
+  if (modem.waitResponse(GF(">")) != 1) {
+    return;
+  }
+
+  for (int i = 0; i < cert_size; i++) {
+    char c = pgm_read_byte(&cert[i]);
+    modem.stream.write(c);
+  }
+
+  modem.stream.write(GSM_NL);
+  modem.stream.flush();
+
+  if (modem.waitResponse(2000) != 1) return;
+  
+  modem.sendAT(GF("+SSLSETCERT=\"" CERT_FILE "\""));
+  if (modem.waitResponse() != 1) return;
+  if (modem.waitResponse(5000L, GF(GSM_NL "+SSLSETCERT:")) != 1) return;
+  const int retCode = modem.stream.readStringUntil('\n').toInt();
+
+
+  SerialMon.println();
+  SerialMon.println();
+  SerialMon.println(F("****************************"));
+  SerialMon.print(F("Setting Certificate: "));
+  SerialMon.println((0 == retCode) ? "OK" : "FAILED");
+  SerialMon.println(F("****************************"));
+}
+
+void loop() {
+  if (SerialAT.available()) {
+    SerialMon.write(SerialAT.read());
+  }
+  if (SerialMon.available()) {
+    SerialAT.write(SerialMon.read());
+  }
+  delay(0);
+}
+

library.json

@@ -1,6 +1,6 @@
 {
   "name": "TinyGSM",
-  "version": "0.3.13",
+  "version": "0.3.20",
   "description": "A small Arduino library for GPRS modules, that just works. Includes examples for Blynk, MQTT, File Download, and Web Client. Supports GSM modules with AT command interface: SIM800, SIM800A, SIM800C, SIM800L, SIM800H, SIM808, SIM868, SIM900, SIM900A, SIM900D, SIM908, SIM968",
   "keywords": "GSM, AT commands, AT, SIM800, SIM900, A6, A7, M590, ESP8266, SIM800A, SIM800C, SIM800L, SIM800H, SIM808, SIM868, SIM900A, SIM900D, SIM908, SIM968",
   "authors":

library.properties

@@ -1,5 +1,5 @@
 name=TinyGSM
-version=0.3.13
+version=0.3.20
 author=Volodymyr Shymanskyy
 maintainer=Volodymyr Shymanskyy
 sentence=A small Arduino library for GPRS modules, that just works.

src/TinyGsmClientA6.h

@@ -82,6 +82,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     uint8_t newMux = -1;
@@ -110,6 +111,7 @@ public:
     at->sendAT(GF("+CIPCLOSE="), mux);
     sock_connected = false;
     at->waitResponse();
+    rx.clear();
   }
 
   virtual size_t write(const uint8_t *buf, size_t size) {
@@ -252,9 +254,7 @@ public:
   }
 
   void maintain() {
-    //while (stream.available()) {
+    waitResponse(10, NULL, NULL);
-      waitResponse(10, NULL, NULL);
-    //}
   }
 
   bool factoryDefault() {
@@ -276,7 +276,9 @@ public:
     return res;
   }
 
-  bool hasSSL() { return false; }
+  bool hasSSL() {
+    return false;
+  }
 
   /*
    * Power functions
@@ -427,7 +429,7 @@ public:
   /*
    * GPRS functions
    */
-  bool gprsConnect(const char* apn, const char* user, const char* pwd) {
+  bool gprsConnect(const char* apn, const char* user = NULL, const char* pwd = NULL) {
     gprsDisconnect();
 
     sendAT(GF("+CGATT=1"));
@@ -458,8 +460,10 @@ public:
   }
 
   bool gprsDisconnect() {
+    // Shut the TCP/IP connection
     sendAT(GF("+CIPSHUT"));
-    waitResponse(5000L);
+    if (waitResponse(60000L) != 1)
+      return false;
 
     for (int i = 0; i<3; i++) {
       sendAT(GF("+CGATT=0"));
@@ -572,12 +576,12 @@ protected:
   int modemSend(const void* buff, size_t len, uint8_t mux) {
     sendAT(GF("+CIPSEND="), mux, ',', len);
     if (waitResponse(2000L, GF(GSM_NL ">")) != 1) {
-      return -1;
+      return 0;
     }
     stream.write((uint8_t*)buff, len);
     stream.flush();
     if (waitResponse(10000L, GFP(GSM_OK), GF(GSM_NL "FAIL")) != 1) {
-      return -1;
+      return 0;
     }
     return len;
   }
@@ -713,8 +717,10 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
-protected:
+public:
   Stream&       stream;
+
+protected:
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

src/TinyGsmClientESP8266.h

@@ -80,6 +80,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, mux);
@@ -103,6 +104,7 @@ public:
     at->sendAT(GF("+CIPCLOSE="), mux);
     sock_connected = false;
     at->waitResponse();
+    rx.clear();
   }
 
   virtual size_t write(const uint8_t *buf, size_t size) {
@@ -194,6 +196,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, mux, true);
@@ -255,7 +258,7 @@ public:
   }
 
   void maintain() {
-      waitResponse(10, NULL, NULL);
+    waitResponse(10, NULL, NULL);
   }
 
   bool factoryDefault() {
@@ -443,12 +446,12 @@ protected:
   int modemSend(const void* buff, size_t len, uint8_t mux) {
     sendAT(GF("+CIPSEND="), mux, ',', len);
     if (waitResponse(GF(">")) != 1) {
-      return -1;
+      return 0;
     }
     stream.write((uint8_t*)buff, len);
     stream.flush();
     if (waitResponse(10000L, GF(GSM_NL "SEND OK" GSM_NL)) != 1) {
-      return -1;
+      return 0;
     }
     return len;
   }
@@ -584,8 +587,10 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
-protected:
+public:
   Stream&       stream;
+
+protected:
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

src/TinyGsmClientM590.h

@@ -80,6 +80,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, mux);
@@ -103,6 +104,7 @@ public:
     at->sendAT(GF("+TCPCLOSE="), mux);
     sock_connected = false;
     at->waitResponse();
+    rx.clear();
   }
 
   virtual size_t write(const uint8_t *buf, size_t size) {
@@ -273,7 +275,9 @@ public:
     return res;
   }
 
-  bool hasSSL() { return false; }
+  bool hasSSL() {
+    return false;
+  }
 
   /*
    * Power functions
@@ -428,7 +432,7 @@ public:
   /*
    * GPRS functions
    */
-  bool gprsConnect(const char* apn, const char* user = "", const char* pwd = "") {
+  bool gprsConnect(const char* apn, const char* user = NULL, const char* pwd = NULL) {
     gprsDisconnect();
 
     sendAT(GF("+XISP=0"));
@@ -724,8 +728,10 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
-protected:
+public:
   Stream&       stream;
+
+protected:
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

src/TinyGsmClientSIM800.h

@@ -85,6 +85,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, mux);
@@ -108,6 +109,7 @@ public:
     at->sendAT(GF("+CIPCLOSE="), mux);
     sock_connected = false;
     at->waitResponse();
+    rx.clear();
   }
 
   virtual size_t write(const uint8_t *buf, size_t size) {
@@ -211,6 +213,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, mux, true);
@@ -320,11 +323,15 @@ public:
   }
 
   bool hasSSL() {
+#if defined(TINY_GSM_MODEM_SIM900)
+    return false;
+#else
     sendAT(GF("+CIPSSL=?"));
     if (waitResponse(GF(GSM_NL "+CIPSSL:")) != 1) {
       return false;
     }
     return waitResponse() == 1;
+#endif
   }
 
   /*
@@ -495,7 +502,7 @@ public:
   /*
    * GPRS functions
    */
-  bool gprsConnect(const char* apn, const char* user = "", const char* pwd = "") {
+  bool gprsConnect(const char* apn, const char* user = NULL, const char* pwd = NULL) {
     gprsDisconnect();
 
     // Set the Bearer for the IP
@@ -583,7 +590,8 @@ public:
   }
 
   bool gprsDisconnect() {
-    sendAT(GF("+CIPSHUT"));  // Shut the TCP/IP connection
+    // Shut the TCP/IP connection
+    sendAT(GF("+CIPSHUT"));
     if (waitResponse(60000L) != 1)
       return false;
 
@@ -644,6 +652,7 @@ public:
   bool sendSMS(const String& number, const String& text) {
     sendAT(GF("+CMGF=1"));
     waitResponse();
+    //Set GSM 7 bit default alphabet (3GPP TS 23.038)
     sendAT(GF("+CSCS=\"GSM\""));
     waitResponse();
     sendAT(GF("+CMGS=\""), number, GF("\""));
@@ -731,28 +740,33 @@ public:
 protected:
 
   bool modemConnect(const char* host, uint16_t port, uint8_t mux, bool ssl = false) {
+#if !defined(TINY_GSM_MODEM_SIM900)
     sendAT(GF("+CIPSSL="), ssl);
     int rsp = waitResponse();
     if (ssl && rsp != 1) {
       return false;
     }
+#endif
     sendAT(GF("+CIPSTART="), mux, ',', GF("\"TCP"), GF("\",\""), host, GF("\","), port);
     rsp = waitResponse(75000L,
                        GF("CONNECT OK" GSM_NL),
                        GF("CONNECT FAIL" GSM_NL),
-                       GF("ALREADY CONNECT" GSM_NL));
+                       GF("ALREADY CONNECT" GSM_NL),
+                       GF("ERROR" GSM_NL),
+                       GF("CLOSE OK" GSM_NL)   // Happens when HTTPS handshake fails
+                      );
     return (1 == rsp);
   }
 
   int modemSend(const void* buff, size_t len, uint8_t mux) {
     sendAT(GF("+CIPSEND="), mux, ',', len);
     if (waitResponse(GF(">")) != 1) {
-      return -1;
+      return 0;
     }
     stream.write((uint8_t*)buff, len);
     stream.flush();
     if (waitResponse(GF(GSM_NL "DATA ACCEPT:")) != 1) {
-      return -1;
+      return 0;
     }
     streamSkipUntil(','); // Skip mux
     return stream.readStringUntil('\n').toInt();
@@ -934,8 +948,10 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
-protected:
+public:
   Stream&       stream;
+
+protected:
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

src/TinyGsmClientU201.h

@@ -81,6 +81,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, &mux);
@@ -105,6 +106,7 @@ public:
     at->sendAT(GF("+USOCL="), mux);
     sock_connected = false;
     at->waitResponse();
+    rx.clear();
   }
 
   virtual size_t write(const uint8_t *buf, size_t size) {
@@ -119,7 +121,7 @@ public:
 
   virtual int available() {
     TINY_GSM_YIELD();
-    if (!rx.size() && sock_connected) { // TODO
+    if (!rx.size() && sock_connected) {
       at->maintain();
     }
     return rx.size() + sock_available;
@@ -200,6 +202,7 @@ public:
 
 public:
   virtual int connect(const char *host, uint16_t port) {
+    stop();
     TINY_GSM_YIELD();
     rx.clear();
     sock_connected = at->modemConnect(host, port, &mux, true);
@@ -287,7 +290,9 @@ public:
 
   String getModemInfo() TINY_GSM_ATTR_NOT_IMPLEMENTED;
 
-  bool hasSSL() { return true; }
+  bool hasSSL() {
+    return true;
+  }
 
   /*
    * Power functions
@@ -433,7 +438,7 @@ public:
   /*
    * GPRS functions
    */
-  bool gprsConnect(const char* apn, const char* user = "", const char* pwd = "") {
+  bool gprsConnect(const char* apn, const char* user = NULL, const char* pwd = NULL) {
     gprsDisconnect();
 
     sendAT(GF("+CGATT=1"));
@@ -732,8 +737,10 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
-protected:
+public:
   Stream&       stream;
+
+protected:
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

src/TinyGsmClientXBee.h

@@ -9,7 +9,7 @@
 #ifndef TinyGsmClientXBee_h
 #define TinyGsmClientXBee_h
 
-// #define TINY_GSM_DEBUG Serial
+//#define TINY_GSM_DEBUG Serial
 
 
 #define TINY_GSM_MUX_COUNT 1  // Multi-plexing isn't supported using command mode
@@ -597,7 +597,7 @@ fail:
   /*
    * GPRS functions
    */
-  bool gprsConnect(const char* apn, const char* user = "", const char* pwd = "") {
+  bool gprsConnect(const char* apn, const char* user = NULL, const char* pwd = NULL) {
     if (!commandMode()) return false;  // Return immediately
     sendAT(GF("AN"), apn);  // Set the APN
     waitResponse();
@@ -626,9 +626,7 @@ fail:
    * Messaging functions
    */
 
-  void sendUSSD() TINY_GSM_ATTR_NOT_AVAILABLE;
+  String sendUSSD(const String& code) TINY_GSM_ATTR_NOT_IMPLEMENTED;
-
-  void sendSMS() TINY_GSM_ATTR_NOT_IMPLEMENTED;
 
   bool sendSMS(const String& number, const String& text) {
     if (!commandMode()) return false;  // Return immediately
@@ -870,10 +868,12 @@ finish:
     return waitResponse(1000, r1, r2, r3, r4, r5);
   }
 
+public:
+  Stream&       stream;
+
 protected:
   int           guardTime;
   XBeeType      beeType;
-  Stream&       stream;
   GsmClient*    sockets[TINY_GSM_MUX_COUNT];
 };
 

tools/AT_Debug/AT_Debug.ino

@@ -18,8 +18,6 @@
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
 
-#include <TinyGsmClient.h>
-
 // Set serial for debug console (to the Serial Monitor, speed 115200)
 #define SerialMon Serial
 

tools/AT_Spy/AT_Spy.ino

@@ -1,7 +1,7 @@
 /**************************************************************
  *
- * This script just listens in on the communication between an Arduino and the
+ * This script just listens in on the communication
- * modem.
+ * between an Arduino and the modem.
  *
  * TinyGSM Getting Started guide:
  *   http://tiny.cc/tiny-gsm-readme
@@ -28,18 +28,20 @@ AltSoftSerial BOARD_TX;
 
 void setup() {
   // Set console baud rate
-  SPY.begin(57600);
+  SPY.begin(115200);
+
   MODEM_TX.begin(BAUD_RATE);
   BOARD_TX.begin(BAUD_RATE);
-  delay(5000);
+  delay(1000);
 }
 
 void loop()
 {
-    while (MODEM_TX.available()) {
+  while (MODEM_TX.available()) {
-      SPY.write(MODEM_TX.read());
+    SPY.write(MODEM_TX.read());
-    }
+  }
-    while (BOARD_TX.available()) {
+  while (BOARD_TX.available()) {
-      SPY.write(BOARD_TX.read());
+    SPY.write(BOARD_TX.read());
-    }
+  }
 }
+