Add Industruino example

examples/more/Industruino/Industruino.ino

@@ -0,0 +1,160 @@
+/**************************************************************
+ *
+ * This sketch connects to a website and downloads a page.
+ * It can be used to perform HTTP/RESTful API calls.
+ *
+ * For this example, you need to install ArduinoHttpClient library:
+ *   https://github.com/arduino-libraries/ArduinoHttpClient
+ *   or from http://librarymanager/all#ArduinoHttpClient
+ *
+ * TinyGSM Getting Started guide:
+ *   http://tiny.cc/tiny-gsm-readme
+ *
+ * For more HTTP API examples, see ArduinoHttpClient library
+ *
+ **************************************************************/
+
+// Industruino uses SIM800H
+#define TINY_GSM_MODEM_SIM800
+
+// Increase RX buffer if needed
+//#define TINY_GSM_RX_BUFFER 512
+
+#include <TinyGsmClient.h>
+#include <ArduinoHttpClient.h>
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+// Uncomment this if you want to use SSL
+//#define USE_SSL
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon SerialUSB
+
+// Select Serial1 or Serial depending on your module configuration
+#define SerialAT Serial1
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
+#ifdef USE_SSL
+  TinyGsmClientSecure client(modem);
+  HttpClient http(client, server, 443);
+#else
+  TinyGsmClient client(modem);
+  HttpClient http(client, server, 80);
+#endif
+
+void setup() {
+  // Turn on modem with 1 second pulse on D6
+  pinMode(6, OUTPUT);
+  digitalWrite(6, HIGH);
+  delay(1000);
+  digitalWrite(6, LOW);
+
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialAT.begin(115200);
+  delay(3000);
+
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  SerialMon.println(F("Initializing modem..."));
+  modem.restart();
+
+  String modemInfo = modem.getModemInfo();
+  SerialMon.print(F("Modem: "));
+  SerialMon.println(modemInfo);
+
+  // Unlock your SIM card with a PIN
+  //modem.simUnlock("1234");
+}
+
+void loop() {
+  SerialMon.print(F("Waiting for network..."));
+  if (!modem.waitForNetwork()) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(apn);
+  if (!modem.gprsConnect(apn, user, pass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Performing HTTP GET request... "));
+  int err = http.get(resource);
+  if (err != 0) {
+    SerialMon.println(F("failed to connect"));
+    delay(10000);
+    return;
+  }
+
+  int status = http.responseStatusCode();
+  SerialMon.println(status);
+  if (!status) {
+    delay(10000);
+    return;
+  }
+
+  while (http.headerAvailable()) {
+    String headerName = http.readHeaderName();
+    String headerValue = http.readHeaderValue();
+    //SerialMon.println(headerName + " : " + headerValue);
+  }
+
+  int length = http.contentLength();
+  if (length >= 0) {
+    SerialMon.print(F("Content length is: "));
+    SerialMon.println(length);
+  }
+  if (http.isResponseChunked()) {
+    SerialMon.println(F("The response is chunked"));
+  }
+
+  String body = http.responseBody();
+  SerialMon.println(F("Response:"));
+  SerialMon.println(body);
+
+  SerialMon.print(F("Body length is: "));
+  SerialMon.println(body.length());
+
+  // Shutdown
+
+  http.stop();
+  SerialMon.println(F("Server disconnected"));
+
+  modem.gprsDisconnect();
+  SerialMon.println(F("GPRS disconnected"));
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}
+