Add Hologram Dash example

examples/more/Hologram_Dash/Hologram_Dash.ino

@@ -0,0 +1,127 @@
+/**************************************************************
+ *
+ * This sketch connects to a website and downloads a page.
+ * It can be used to perform HTTP/RESTful API calls.
+ *
+ * TinyGSM Getting Started guide:
+ *   http://tiny.cc/tiny-gsm-readme
+ *
+ **************************************************************/
+
+// Hologram Dash uses UBLOX U2 modems
+#define TINY_GSM_MODEM_UBLOX
+
+// Increase RX buffer if needed
+//#define TINY_GSM_RX_BUFFER 512
+
+#include <TinyGsmClient.h>
+
+// Uncomment this if you want to see all AT commands
+//#define DUMP_AT_COMMANDS
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon Serial
+
+// We'll be using SerialSystem in Passthrough mode
+#define SerialAT SerialSystem
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+const int  port = 80;
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm mdm(debugger);
+#else
+  TinyGsm mdm(SerialAT);
+#endif
+
+TinyGsmClient client(mdm);
+
+void setup() {
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set up Passthrough
+  HologramCloud.enterPassthrough();
+  delay(3000);
+
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  SerialMon.println(F("Initializing modem..."));
+  mdm.restart();
+
+  String modemInfo = mdm.getModemInfo();
+  SerialMon.print(F("Modem: "));
+  SerialMon.println(modemInfo);
+
+  // Unlock your SIM card with a PIN
+  //mdm.simUnlock("1234");
+}
+
+void loop() {
+  SerialMon.print(F("Waiting for network..."));
+  if (!mdm.waitForNetwork()) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(apn);
+  if (!mdm.gprsConnect(apn, user, pass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(server);
+  if (!client.connect(server, port)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  // Make a HTTP GET request:
+  client.print(String("GET ") + resource + " HTTP/1.0\r\n");
+  client.print(String("Host: ") + server + "\r\n");
+  client.print("Connection: close\r\n\r\n");
+
+  unsigned long timeout = millis();
+  while (client.connected() && millis() - timeout < 10000L) {
+    // Print available data
+    while (client.available()) {
+      char c = client.read();
+      SerialMon.print(c);
+      timeout = millis();
+    }
+  }
+  SerialMon.println();
+
+  // Shutdown
+
+  client.stop();
+  SerialMon.println(F("Server disconnected"));
+
+  mdm.gprsDisconnect();
+  SerialMon.println(F("GPRS disconnected"));
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}
+