Added SIM7000(A/E/C/G)

First version - clone of SIM800 with changed values including /example folder

examples/AllFunctions/AllFunctions.ino

@@ -10,9 +10,10 @@
  **************************************************************/
 
 // Select your modem:
-#define TINY_GSM_MODEM_SIM800
+//#define TINY_GSM_MODEM_SIM800
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM900
+#define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -199,4 +200,3 @@ void loop() {
     modem.maintain();
   }
 }
-

examples/SIM7000-ESP32/Diagnostics/Diagnostics.ino

@@ -0,0 +1,187 @@
+/**************************************************************
+ *
+ * To run this tool you need StreamDebugger library:
+ *   https://github.com/vshymanskyy/StreamDebugger
+ *   or from http://librarymanager/all#StreamDebugger
+ *
+ * TinyGSM Getting Started guide:
+ *   https://tiny.cc/tinygsm-readme
+ *
+ **************************************************************/
+
+// Select your modem:
+//#define TINY_GSM_MODEM_SIM800
+// #define TINY_GSM_MODEM_SIM808
+// #define TINY_GSM_MODEM_SIM900
+#define TINY_GSM_MODEM_SIM7000
+// #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_BG96
+// #define TINY_GSM_MODEM_A6
+// #define TINY_GSM_MODEM_A7
+// #define TINY_GSM_MODEM_M590
+// #define TINY_GSM_MODEM_ESP8266
+// #define TINY_GSM_MODEM_XBEE
+
+// Increase the buffer
+#define TINY_GSM_RX_BUFFER 512
+
+// Define the serial console for debug prints, if needed
+//#define TINY_GSM_DEBUG Serial
+
+#include <TinyGsmClient.h>
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "drei.at";
+const char user[] = "";
+const char pass[] = "";
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon Serial
+
+// Set serial for AT commands (to the module)
+// Use Hardware Serial on Mega, Leonardo, Micro, Esp32
+#include "HardwareSerial.h"
+#define SerialAT Serial2
+
+// or Software Serial on Uno, Nano
+//#include <SoftwareSerial.h>
+//SoftwareSerial SerialAT(2, 3); // RX, TX
+
+#include <StreamDebugger.h>
+StreamDebugger debugger(SerialAT, SerialMon);
+TinyGsm modem(debugger);
+
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+
+const int  port = 80;
+TinyGsmClient client(modem);
+
+// For SSL:
+//const int  port = 443;
+//TinyGsmClientSecure client(modem);
+
+void setup() {
+  // Set console baud rate
+  Serial.println("Starting Serial");
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialAT.begin(9600);
+  delay(3000);
+}
+
+void loop() {
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  SerialMon.print("Initializing modem...");
+  if (!modem.restart()) {
+    SerialMon.println(F(" [fail]"));
+    SerialMon.println(F("************************"));
+    SerialMon.println(F(" Is your modem connected properly?"));
+    SerialMon.println(F(" Is your serial speed (baud rate) correct?"));
+    SerialMon.println(F(" Is your modem powered on?"));
+    SerialMon.println(F(" Do you use a good, stable power source?"));
+    SerialMon.println(F(" Try useing File -> Examples -> TinyGSM -> tools -> AT_Debug to find correct configuration"));
+    SerialMon.println(F("************************"));
+    delay(10000);
+    return;
+  }
+  SerialMon.println(F(" [OK]"));
+
+  String modemInfo = modem.getModemInfo();
+  SerialMon.print("Modem: ");
+  SerialMon.println(modemInfo);
+
+  // Unlock your SIM card with a PIN
+  //modem.simUnlock("1234");
+
+  SerialMon.print("Waiting for network...");
+  if (!modem.waitForNetwork()) {
+    SerialMon.println(F(" [fail]"));
+    SerialMon.println(F("************************"));
+    SerialMon.println(F(" Is your sim card locked?"));
+    SerialMon.println(F(" Do you have a good signal?"));
+    SerialMon.println(F(" Is antenna attached?"));
+    SerialMon.println(F(" Does the SIM card work with your phone?"));
+    SerialMon.println(F("************************"));
+    delay(10000);
+    return;
+  }
+  SerialMon.println(F(" [OK]"));
+
+  SerialMon.print("Connecting to ");
+  SerialMon.print(apn);
+  if (!modem.gprsConnect(apn, user, pass)) {
+    SerialMon.println(F(" [fail]"));
+    SerialMon.println(F("************************"));
+    SerialMon.println(F(" Is GPRS enabled by network provider?"));
+    SerialMon.println(F(" Try checking your card balance."));
+    SerialMon.println(F("************************"));
+    delay(10000);
+    return;
+  }
+  SerialMon.println(F(" [OK]"));
+
+  IPAddress local = modem.localIP();
+  SerialMon.print("Local IP: ");
+  SerialMon.println(local);
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(server);
+  if (!client.connect(server, port)) {
+    SerialMon.println(F(" [fail]"));
+    delay(10000);
+    return;
+  }
+  SerialMon.println(F(" [OK]"));
+
+  // Make a HTTP GET request:
+  client.print(String("GET ") + resource + " HTTP/1.0\r\n");
+  client.print(String("Host: ") + server + "\r\n");
+  client.print("Connection: close\r\n\r\n");
+
+  // Wait for data to arrive
+  while (client.connected() && !client.available()) {
+    delay(100);
+    SerialMon.print('.');
+  };
+  SerialMon.println();
+
+  // Skip all headers
+  client.find("\r\n\r\n");
+
+  // Read data
+  unsigned long timeout = millis();
+  unsigned long bytesReceived = 0;
+  while (client.connected() && millis() - timeout < 10000L) {
+    while (client.available()) {
+      char c = client.read();
+      //SerialMon.print(c);
+      bytesReceived += 1;
+      timeout = millis();
+    }
+  }
+
+  client.stop();
+  SerialMon.println(F("Server disconnected"));
+
+  modem.gprsDisconnect();
+  SerialMon.println(F("GPRS disconnected"));
+
+  SerialMon.println();
+  SerialMon.println(F("************************"));
+  SerialMon.print  (F(" Received: "));
+  SerialMon.print(bytesReceived);
+  SerialMon.println(F(" bytes"));
+  SerialMon.print  (F(" Test:     "));
+  SerialMon.println((bytesReceived == 121) ? "PASSED" : "FAILED");
+  SerialMon.println(F("************************"));
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}

src/TinyGsmClient.h

@@ -9,11 +9,11 @@
 #ifndef TinyGsmClient_h
 #define TinyGsmClient_h
 
-#if defined(TINY_GSM_MODEM_SIM800) || defined(TINY_GSM_MODEM_SIM868) || defined(TINY_GSM_MODEM_UBLOX) || defined(TINY_GSM_MODEM_ESP8266)
+#if defined(TINY_GSM_MODEM_SIM800) || defined(TINY_GSM_MODEM_SIM868) || defined(TINY_GSM_MODEM_UBLOX) || defined(TINY_GSM_MODEM_ESP8266) || defined(TINY_GSM_MODEM_SIM7000)
   #define TINY_GSM_MODEM_HAS_SSL
 #endif
 
-#if defined(TINY_GSM_MODEM_SIM808) || defined(TINY_GSM_MODEM_SIM868) || defined(TINY_GSM_MODEM_A7)
+#if defined(TINY_GSM_MODEM_SIM808) || defined(TINY_GSM_MODEM_SIM868) || defined(TINY_GSM_MODEM_A7) || defined(TINY_GSM_MODEM_SIM7000)
   #define TINY_GSM_MODEM_HAS_GPS
 #endif
 
@@ -24,6 +24,13 @@
   typedef TinyGsmSim800::GsmClient TinyGsmClient;
   typedef TinyGsmSim800::GsmClientSecure TinyGsmClientSecure;
 
+#elif   defined(TINY_GSM_MODEM_SIM7000)
+  #define TINY_GSM_MODEM_HAS_GPRS
+  #include <TinyGsmClientSIM7000.h>
+  typedef TinyGsmSim7000 TinyGsm;
+  typedef TinyGsmSim7000::GsmClient TinyGsmClient;
+  typedef TinyGsmSim7000::GsmClientSecure TinyGsmClientSecure;
+
 #elif defined(TINY_GSM_MODEM_SIM808) || defined(TINY_GSM_MODEM_SIM868)
   #define TINY_GSM_MODEM_HAS_GPRS
   #include <TinyGsmClientSIM808.h>