Add function test sketch. Fix #32

examples/AllFunctions/AllFunctions.ino

@@ -0,0 +1,155 @@
+/**************************************************************
+ *
+ * TinyGSM Getting Started guide:
+ *   http://tiny.cc/tiny-gsm-readme
+ *
+ * NOTE:
+ * Some of the functions may be unavailable for your modem.
+ * Just comment them out.
+ *
+ **************************************************************/
+
+// Select your modem:
+#define TINY_GSM_MODEM_SIM800
+// #define TINY_GSM_MODEM_SIM900
+// #define TINY_GSM_MODEM_A6
+// #define TINY_GSM_MODEM_A7
+// #define TINY_GSM_MODEM_M590
+// #define TINY_GSM_MODEM_ESP8266
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon Serial
+
+// Set serial for AT commands (to the module)
+// Use Hardware Serial on Mega, Leonardo, Micro
+#define SerialAT Serial1
+
+// or Software Serial on Uno, Nano
+//#include <SoftwareSerial.h>
+//SoftwareSerial SerialAT(2, 3); // RX, TX
+
+
+//#define DUMP_AT_COMMANDS
+
+// Set phone numbers, if you want to test SMS and Calls
+//#define SMS_TARGET  "+380xxxxxxxxx"
+//#define CALL_TARGET "+380xxxxxxxxx"
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+const char apn[]  = "YourAPN";
+const char user[] = "";
+const char pass[] = "";
+
+#include <TinyGsmClient.h>
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
+void setup() {
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialAT.begin(115200);
+  delay(3000);
+}
+
+void loop() {
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  DBG("Initializing modem...");
+  if (!modem.restart()) {
+    delay(10000);
+    return;
+  }
+
+  // Unlock your SIM card with a PIN
+  //modem.simUnlock("1234");
+
+  DBG("Waiting for network...");
+  if (!modem.waitForNetwork()) {
+    delay(10000);
+    return;
+  }
+
+  DBG("Connecting to", apn);
+  if (!modem.gprsConnect(apn, user, pass)) {
+    delay(10000);
+    return;
+  }
+
+  bool res;
+
+  String modemInfo = modem.getModemInfo();
+  DBG("Modem:", modemInfo);
+
+  String ccid = modem.getSimCCID();
+  DBG("CCID:", ccid);
+
+  String imei = modem.getIMEI();
+  DBG("IMEI:", imei);
+
+  String cop = modem.getOperator();
+  DBG("Operator:", cop);
+  
+  IPAddress local = modem.localIP();
+  DBG("Local IP:", local);
+
+  int csq = modem.getSignalQuality();
+  DBG("Signal quality:", csq);
+
+  int battLevel = modem.getBattPercent();
+  DBG("Battery lavel:", battLevel);
+
+  // This is only supported on SIMxxx series
+  float battVoltage = modem.getBattVoltage() / 1000.0F;
+  DBG("Battery voltage:", battVoltage);
+
+  // This is only supported on SIMxxx series
+  String gsmLoc = modem.getGsmLocation();
+  DBG("GSM location:", gsmLoc);
+
+  String ussd_balance = modem.sendUSSD("*111#");
+  DBG("Balance (USSD):", ussd_balance);
+
+  String ussd_phone_num = modem.sendUSSD("*161#");
+  DBG("Phone number (USSD):", ussd_phone_num);
+
+#ifdef SMS_TARGET
+  res = modem.sendSMS(SMS_TARGET, String("Hello from ") + imei);
+  DBG("SMS:", res ? "OK" : "fail");
+
+  // This is only supported on SIMxxx series
+  res = modem.sendSMS_UTF16(SMS_TARGET, u"Привіііт!", 9);
+  DBG("UTF16 SMS:", res ? "OK" : "fail");
+#endif
+
+#ifdef CALL_TARGET
+  // This is NOT supported on M590
+  res = modem.callNumber(CALL_TARGET);
+  DBG("Call:", res ? "OK" : "fail");
+
+  if (res) {
+    delay(5000L);
+  
+    res = modem.callHangup();
+    DBG("Hang up:", res ? "OK" : "fail");
+  }
+#endif
+
+  modem.gprsDisconnect();
+  DBG("GPRS disconnected");
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}
+