diff --git a/samples/DIGITAL Command Language/fis_gtm_kitinstal.com b/samples/DIGITAL Command Language/fis_gtm_kitinstal.com
new file mode 100644
index 00000000..b4701ff9
--- /dev/null
+++ b/samples/DIGITAL Command Language/fis_gtm_kitinstal.com	
@@ -0,0 +1,443 @@
+$!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+$!								!
+$!	Copyright 2001, 2011 Fidelity Information Services, Inc	!
+$!								!
+$!	This source code contains the intellectual property	!
+$!	of its copyright holder(s), and is made available	!
+$!	under a license.  If you do not know the terms of	!
+$!	the license, please stop and do not read further.	!
+$!								!
+$!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+$!
+$!
+$!	KITINSTAL.COM PROCEDURE FOR THE GT.M PRODUCT
+$!
+$ ON CONTROL_Y THEN VMI$CALLBACK CONTROL_Y
+$! ON WARNING THEN EXIT $STATUS !! allow warning errors for INSTALL REPLACE
+$ IF P1 .EQS. "VMI$_INSTALL" THEN GOTO INSTALL
+$ IF P1 .EQS. "VMI$_POSTINSTALL" THEN GOTO POSTINSTALL
+$ IF P1 .EQS. "VMI$_IVP" THEN GOTO IVP
+$ EXIT VMI$_UNSUPPORTED
+$!
+$INSTALL:
+$ TYPE SYS$INPUT
+
+  GT.M  (c)  COPYRIGHT 1985 - 2000  by  Sanchez Computer Associates
+                            ALL RIGHTS RESERVED
+
+$!  the following 2 lines must be maintained
+$ GTM$VMS_VERSION :== 072	! Minimum VMS version required
+$ ALPHA = (f$getsyi("arch_name") .eqs. "Alpha")
+$ IF ALPHA
+$  THEN
+$   GTM$DISK_SPACE == 28000	! Minumum disk space on system disk required
+$  ELSE
+$   GTM$DISK_SPACE == 16000	! Minumum disk space on system disk required
+$ ENDIF
+$ IF F$ELEMENT(0,",",VMI$VMS_VERSION) .EQS. "RELEASED"
+$  THEN
+$   GTM$VMS_IS == F$ELEMENT(1,",",VMI$VMS_VERSION)
+$   IF GTM$VMS_IS .LTS. GTM$VMS_VERSION
+$    THEN
+$     VMI$CALLBACK MESSAGE E VMSMISMATCH "This GT.M kit requires an existing VMS''GTM$VMS_VERSION' system."
+$     EXIT VMI$_FAILURE
+$   ENDIF
+$  ELSE
+$   GTM$VMS_IS :==
+$   WRITE SYS$OUTPUT "  No VMS version checking performed for field test versions."
+$ ENDIF
+$ IF (GTM$VMS_IS .GES. "052") THEN T1 = F$VERIFY(VMI$KIT_DEBUG)
+$ VMI$CALLBACK CHECK_NET_UTILIZATION GTM$ROOM 'GTM$DISK_SPACE'
+$ IF .NOT. GTM$ROOM
+$  THEN
+$   VMI$CALLBACK MESSAGE E NOSPACE "There is not enough disk space -- GT.M needs ''GTM$DISK_SPACE' blocks."
+$   EXIT VMI$_FAILURE
+$ ENDIF
+$!  setup default answers
+$ GTM$DOPURGE :== YES
+$ GTM$RUN_IVP :== YES
+$ GTM$STD_CNF :== YES
+$ GTM$DST_OWN :== SYSTEM
+$ IF F$IDENTIFIER(GTM$DST_OWN,"NAME_TO_NUMBER") .EQ. 0 THEN GTM$DST_OWN :== 1,4
+$ GTM$SYS_DST :== YES
+$ GTM$DST_DIR :== GTM_DIST
+$ GTM$DST_CRE == GTM$DST_DIR
+$ GTM$DST_DEV :==
+$ GTM$STARTDB :== YES
+$ GTM$MGR_COM :== YES
+$ GTM$HLP_DIR :== NO
+$ GTM$DEF_DCL :== YES
+$ GTM$DEF_SYS :== YES
+$ GTM$LNK_LOG :== YES
+$ GTM$INSTALL :== YES
+$ GTM$DEF_GLD :== YES
+$ GTM$GBL_DIR :== MUMPS.GLD
+$ GTM$DEF_RTN :== YES
+$ GTM$RTN_DIR :== [],GTM$DIST:
+$ GTM$PCT_RTN :== YES
+$ VMI$CALLBACK ASK GTM$DOPURGE "Do you want to purge files replaced by this installation" 'GTM$DOPURGE' B -
+  "@VMI$KWD:GTMKITHLP HELP_PURGE"
+$ IF .NOT. GTM$DOPURGE THEN VMI$CALLBACK SET PURGE NO
+$ VMI$CALLBACK ASK GTM$STD_CNF "Do you want the standard GT.M configuration (performs INSTALL)" 'GTM$STD_CNF' B -
+  "@VMI$KWD:GTMKITHLP HELP_STD_CNF"
+$ IF GTM$STD_CNF
+$  THEN
+$   GTM$SYS_DST == 1
+$   GTM$STARTDB == 1
+$   GTM$MGR_COM == 1
+$   GTM$HLP_DIR == 0
+$   GTM$DEF_DCL == 1
+$   GTM$DEF_SYS == 1
+$   GTM$INSTALL == 1
+$   GTM$LNK_LOG == 1
+$   GTM$INSTALL == 1
+$   GTM$DEF_GLD == 1
+$   GTM$DEF_RTN == 1
+$   GTM$PCT_RTN == 1
+$   GTM$DST_LOG :== SYS$COMMON:['GTM$DST_DIR']
+$   GTM$DIR_TYPE :== COMMON
+$  ELSE ! Not standard configuration
+$   VMI$CALLBACK ASK GTM$DST_OWN "What UIC should own the GT.M distribution" 'GTM$DST_OWN' S "@VMI$KWD:GTMKITHLP HELP_DST_OWN"
+$   GTM$DST_OWN == GTM$DST_OWN - "[" - "]"
+$   VMI$CALLBACK ASK GTM$SYS_DST "Do you want the GT.M distribution to go into a System Directory" 'GTM$SYS_DST' B -
+    "@VMI$KWD:GTMKITHLP HELP_SYS_DST"
+$   IF GTM$SYS_DST
+$    THEN
+$     VMI$CALLBACK ASK GTM$DST_DIR "In what System Directory do you want to place GT.M" 'GTM$DST_DIR' S -
+      "@VMI$KWD:GTMKITHLP HELP_SYS_DIR"
+$     GTM$DST_DIR == GTM$DST_DIR - "[" - "]"
+$     GTM$DST_CRE == GTM$DST_DIR
+$     GTM$DST_LOG :== SYS$COMMON:['GTM$DST_DIR']
+$     GTM$DIR_TYPE :== COMMON
+$    ELSE ! Not system disk
+$     VMI$CALLBACK ASK GTM$DST_DEV "On which device do you want to place GT.M" "''GTM$DST_DEV'" S "@VMI$KWD:GTMKITHLP HELP_DST_DEV"
+$     VMI$CALLBACK ASK GTM$DST_DIR "In what directory on that device do you want to place GT.M" 'GTM$DST_DIR' S -
+      "@VMI$KWD:GTMKITHLP HELP_DST_DIR"
+$     GTM$DST_DEV == GTM$DST_DEV - ":"
+$     GTM$DST_DIR == GTM$DST_DIR - "[" - "]"
+$     GTM$DST_LOG :== 'GTM$DST_DEV':['GTM$DST_DIR']
+$     GTM$DST_CRE == GTM$DST_LOG
+$     GTM$DIR_TYPE :== USER
+$   ENDIF ! system disk
+$   VMI$CALLBACK ASK GTM$STARTDB "Do you want GTMSTART.COM in the startup database" 'GTM$STARTDB' B -
+    "@VMI$KWD:GTMKITHLP HELP_STARTDB"
+$   IF .NOT. GTM$STARTDB
+$    THEN
+$     VMI$CALLBACK ASK GTM$MGR_COM "Do you want the GT.M .COM files in SYS$MANAGER" 'GTM$MGR_COM' B -
+      "@VMI$KWD:GTMKITHLP HELP_MGR_COM"
+$   ENDIF
+$   VMI$CALLBACK ASK GTM$HLP_DIR "Do you want the GT.M help files in SYS$HELP" 'GTM$HLP_DIR' B "@VMI$KWD:GTMKITHLP HELP_HLP_DIR"
+$   VMI$CALLBACK ASK GTM$DEF_DCL "Do you want to define GT.M commands to the system" 'GTM$DEF_DCL' B -
+    "@VMI$KWD:GTMKITHLP HELP_DEF_DCL"
+$   VMI$CALLBACK ASK GTM$DEF_SYS "Do you want to define GT.M logical names in the System Table" 'GTM$DEF_SYS' B -
+    "@VMI$KWD:GTMKITHLP HELP_DEF_SYS"
+$   VMI$CALLBACK ASK GTM$LNK_LOG "Do you want to define the LNK$LIBRARY logical names" 'GTM$LNK_LOG' B -
+    "@VMI$KWD:GTMKITHLP HELP_LNK_LOG"
+$   VMI$CALLBACK ASK GTM$RUN_IVP "Do you want to run the IVP (performs INSTALL)" 'GTM$RUN_IVP' B -
+    "@VMI$KWD:GTMKITHLP HELP_RUN_IVP"
+$   IF GTM$RUN_IVP
+$    THEN
+$     GTM$PCT_RTN == 1
+$    ELSE
+$     VMI$CALLBACK ASK GTM$PCT_RTN "Do you want to compile the GT.M percent routines (performs INSTALL)" 'GTM$PCT_RTN' B -
+      "@VMI$KWD:GTMKITHLP HELP_PCT_RTN"
+$   ENDIF
+$   IF (GTM$RUN_IVP .OR. GTM$PCT_RTN)
+$    THEN
+$     GTM$INSTALL == 1
+$    ELSE
+$     VMI$CALLBACK ASK GTM$INSTALL "Do you want to INSTALL the GT.M shareable images now" 'GTM$INSTALL' B -
+      "@VMI$KWD:GTMKITHLP HELP_INSTALL"
+$   ENDIF
+$   VMI$CALLBACK ASK GTM$DEF_RTN "Do you want to have a default definition for GTM$ROUTINES" 'GTM$DEF_RTN' B -
+    "@VMI$KWD:GTMKITHLP HELP_DEF_RTN"
+$   IF GTM$DEF_RTN
+$    THEN
+$     VMI$CALLBACK ASK GTM$RTN_DIR "What is the search specification for GTM$ROUTINES" 'GTM$RTN_DIR' S -
+      "@VMI$KWD:GTMKITHLP HELP_RTN_DIR"
+$   ENDIF
+$   VMI$CALLBACK ASK GTM$DEF_GLD "Do you want to have a default definition for GTM$GBLDIR" 'GTM$DEF_GLD' B -
+    "@VMI$KWD:GTMKITHLP HELP_DEF_GLD"
+$   IF GTM$DEF_GLD
+$    THEN
+$     VMI$CALLBACK ASK GTM$GBL_DIR "What is the file specification for GTM$GBLDIR" 'GTM$GBL_DIR' S -
+      "@VMI$KWD:GTMKITHLP HELP_GBL_DIR"
+$   ENDIF
+$ ENDIF ! standard configuration
+$!  tell them what's happening
+$ IF GTM$MGR_COM
+$  THEN
+$   WRITE SYS$OUTPUT "  The following command files are created and copied to SYS$MANAGER:"
+$  ELSE
+$   WRITE SYS$OUTPUT "  The following command files are created:"
+$ ENDIF
+$ TYPE SYS$INPUT
+
+        GTMINSTALL.COM
+        GTMLOGICALS.COM
+        GTMLOGIN.COM
+        GTMSTART.COM
+        GTMSTOP.COM
+
+  Each file contains its own user documentation.
+
+  All the questions have been asked.   Installation now proceeds  without your
+  manual intervention for about 10-15 minutes.
+$ IF GTM$RUN_IVP THEN WRITE SYS$OUTPUT "  Finally the Installation Verification Procedure tests the installation."
+$ WRITE SYS$OUTPUT ""
+$ VMI$CALLBACK CREATE_DIRECTORY 'GTM$DIR_TYPE' 'GTM$DST_CRE' "/OWNER_UIC=[''GTM$DST_OWN'] /PROTECTION=(WO:RE)"
+$ VMI$CALLBACK RESTORE_SAVESET B
+$ VMI$CALLBACK RESTORE_SAVESET C
+$ WRITE SYS$OUTPUT ""
+$ VMI$CALLBACK MESSAGE I CRECOM "Creating command files."
+$!  Create GTMINSTALL.COM
+$ OPEN /WRITE OUFILE VMI$KWD:GTMINSTALL.COM
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$!	GTMINSTALL.COM installs GTMSECSHR and other GT.M images."
+$ WRITE OUFILE "$!      GTMSECSHR is a small protected image and must be installed."
+$ WRITE OUFILE "$!      GTMSHR is the run-time library and is installed for performance."
+$ WRITE OUFILE "$!      GTM$DMOD and MCOMPILE are small images frequently used in development."
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$ INSTALL"
+$ WRITE OUFILE "REPLACE  /OPEN/SHARED/HEADER/PROTECTED	GTMSECSHR"
+$ WRITE OUFILE "REPLACE  /OPEN/SHARED/HEADER		GTMSHR"
+$ WRITE OUFILE "REPLACE  /OPEN/SHARED/HEADER		GTM$DMOD"
+$ WRITE OUFILE "REPLACE  /OPEN/SHARED/HEADER		MCOMPILE"
+$ WRITE OUFILE "$ EXIT"
+$ CLOSE OUFILE
+$!  Create GTMLOGICALS.COM
+$ GTM$HLP_LOG :== GTM$DIST
+$ IF GTM$HLP_DIR THEN GTM$HLP_LOG :== SYS$HELP
+$ OPEN /WRITE OUFILE VMI$KWD:GTMLOGICALS.COM
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$!	GTMLOGICALS.COM defines the logical names required to use GT.M."
+$ WRITE OUFILE "$!	By default the definitions are placed in the PROCESS table."
+$ WRITE OUFILE "$!	Parameter 1, if supplied should be the name of a logical name table"
+$ WRITE OUFILE "$!	and/or the mode of definition."
+$ WRITE OUFILE "$!      Assignments in a ""permanent"" table reduce GT.M activation time."
+$ WRITE OUFILE "$!"
+$ IF GTM$LNK_LOG THEN WRITE OUFILE "$!	The LNK$LIBRARY names many require adjustment to your environment."
+$ IF GTM$DEF_GLD THEN WRITE OUFILE "$!	GTM$GBLDIR is defined to provide default access to a global directory."
+$ IF GTM$DEF_RTN THEN WRITE OUFILE "$!	GTM$ROUTINES is defined to provide access to the GT.M utilities."
+$ IF GTM$DEF_RTN THEN WRITE OUFILE "$!	You may wish to define a different structure for $ZROUTINES."
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$ IF (P1 .NES. """") .AND. (F$EXTRACT(0,1,P1) .NES. ""/"") THEN P1 := /'P1"
+$ WRITE OUFILE "$ DEFINE 'P1' GTM$DIST		''GTM$DST_LOG'"
+$ IF GTM$DEF_GLD THEN WRITE OUFILE "$ DEFINE 'P1' GTM$GBLDIR	''GTM$GBL_DIR'"
+$ IF GTM$DEF_RTN THEN WRITE OUFILE "$ DEFINE 'P1' GTM$ROUTINES	""''GTM$RTN_DIR'"""
+$ WRITE OUFILE "$ DEFINE 'P1' GTM$HELP		''GTM$HLP_LOG'"
+$ WRITE OUFILE "$ DEFINE 'P1' GTMSHR		GTM$DIST:GTMSHR.EXE"
+$ WRITE OUFILE "$ DEFINE 'P1' GTMSECSHR		GTM$DIST:GTMSECSHR.EXE"
+$ WRITE OUFILE "$ DEFINE 'P1' GTM$DMOD		GTM$DIST:GTM$DMOD.EXE"
+$ WRITE OUFILE "$ DEFINE 'P1' MCOMPILE		GTM$DIST:MCOMPILE.EXE"
+$ IF GTM$LNK_LOG
+$  THEN
+$   N1 = 0
+$   DN = 0
+$   T1 = F$TRNLNM("LNK$LIBRARY")
+$   IF  (T1 .EQS. "") .OR. (F$LOCATE("GTMLIB",T1) .NE. F$LENGTH(T1)) .OR. (F$LOCATE("GTMSHR",T1) .NE. F$LENGTH(T1))
+$    THEN
+$     WRITE OUFILE "$ DEFINE 'P1' LNK$LIBRARY	GTM$DIST:GTMLIB.OLB"
+$     DN = 1
+$    ELSE ! lnk$library is in use
+$LNK_LOOP:
+$     N1 = N1 + 1
+$     T1 = F$TRNLNM("LNK$LIBRARY_''N1'")
+$     IF  (T1 .EQS. "") .OR. (F$LOCATE("GTMLIB",T1) .NE. F$LENGTH(T1)) .OR. (F$LOCATE("GTMSHR",T1) .NE. F$LENGTH(T1))
+$      THEN
+$       WRITE OUFILE "$ DEFINE 'P1' LNK$LIBRARY_''N1'	GTM$DIST:GTMLIB.OLB"
+$       DN = 1
+$     ENDIF
+$     IF  (.NOT. DN) .AND. (N1 .LT. 998)  THEN  GOTO LNK_LOOP
+$   ENDIF ! gtmlib handling
+$   IF  DN ! placed gtmlib
+$    THEN
+$     N1 = N1 + 1
+$     WRITE OUFILE "$ DEFINE 'P1' LNK$LIBRARY_''N1'	GTM$DIST:GTMSHR.OLB"
+$    ELSE
+$     VMI$CALLBACK MESSAGE I NOLNKLOG "No LNK$LIBRARY logical names available"
+$   ENDIF
+$ ENDIF ! setting up LNK$LIBRARYs
+$ WRITE OUFILE "$ EXIT"
+$ CLOSE OUFILE
+$!  Create GTMLOGIN.COM
+$ OPEN /WRITE OUFILE VMI$KWD:GTMLOGIN.COM
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$!	GTMLOGIN.COM performs process specific setup for GT.M."
+$ WRITE OUFILE "$!	It calls GTMLOGICALS.COM if the logical names are not"
+$ WRITE OUFILE "$!      in the SYSTEM table."
+$ WRITE OUFILE "$!	It defines symbols to access GT.M images."
+$ WRITE OUFILE "$!	It defines GT.M commands locally if they are not defined to the system."
+$ WRITE OUFILE "$!      When the command and logical names are not defined on a process level,"
+$ WRITE OUFILE "$!      a production user may save start-up time by not using GTMLOGIN."
+$ WRITE OUFILE "$!      CCE is infrequently used, but may be defined as a foreign command."
+$ WRITE OUFILE "$!"
+$ IF .NOT. GTM$DEF_SYS
+$  THEN
+$   WRITE OUFILE "$ dir = F$ENVIRONMENT(""PROCEDURE"")"
+$   WRITE OUFILE "$ dir = F$PARSE(dir,,,""DEVICE"") + F$PARSE(dir,,,""DIRECTORY"")"
+$   WRITE OUFILE "$ @'dir'GTMLOGICALS.COM"
+$ ENDIF
+$ IF .NOT. GTM$DEF_DCL THEN WRITE OUFILE "$ SET COMMAND GTM$DIST:GTMCOMMANDS.CLD"
+$ WRITE OUFILE "$ DSE :== $GTM$DIST:DSE.EXE	! Database System Editor"
+$ WRITE OUFILE "$ GDE :== $GTM$DIST:GDE.EXE	! Global Directory Editor"
+$ WRITE OUFILE "$ GTM :== MUMPS/DIRECT		! Direct Mode MUMPS"
+$ WRITE OUFILE "$ LKE :== $GTM$DIST:LKE.EXE	! Lock Editor"
+$ WRITE OUFILE "$ MUPI*P :== $GTM$DIST:MUPIP.EXE	! MUMPS Peripheral Interchange Program"
+$ WRITE OUFILE "$ EXIT"
+$ WRITE OUFILE "$ CCE :== $GTM$DIST:CCE.EXE	! GT.CX Operator Interface Program"
+$ WRITE OUFILE "$ EXIT"
+$ CLOSE OUFILE
+$!  Create GTMSTART.COM
+$ OPEN /WRITE OUFILE VMI$KWD:GTMSTART.COM
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$!	GTMSTART.COM should be placed in the VMS startup database."
+$ WRITE OUFILE "$!	It invokes GTMLOGICALS.COM and GTMINSTALL.COM."
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$ dir = F$ENVIRONMENT(""PROCEDURE"")"
+$ WRITE OUFILE "$ dir = F$PARSE(dir,,,""DEVICE"") + F$PARSE(dir,,,""DIRECTORY"")"
+$ IF GTM$DEF_SYS THEN WRITE OUFILE "$ IF P1 .EQS. """" .OR. (P1 .EQS. ""FULL"") THEN P1 := SYSTEM/EXEC"
+$ WRITE OUFILE "$ @'dir'GTMLOGICALS 'P1'"
+$ WRITE OUFILE "$ @'dir'GTMINSTALL"
+$ WRITE OUFILE "$ EXIT"
+$ CLOSE OUFILE
+$!  Create GTMSTOP.COM
+$ OPEN /WRITE OUFILE VMI$KWD:GTMSTOP.COM
+$ WRITE OUFILE "$!"
+$ WRITE OUFILE "$!	GTMSTOP.COM stops all the active GT.M processes and does a RUNDOWN."
+$ WRITE OUFILE "$!	Place an invocation or copy of this procedure in the site specific"
+$ WRITE OUFILE "$!	 shutdown: SYS$MANAGER:SYSHUTDWN to ensure all GT.M databases are"
+$ WRITE OUFILE "$!	 properly closed before VMS terminates.  GTMSTOP should follow"
+$ WRITE OUFILE "$!	 GTCMSTOP and precede GTCXSTOP, if they are used."
+$ WRITE OUFILE "$!	If GTMSTOP is not intended to disable subsequent use of GT.M,"
+$ WRITE OUFILE "$!	 add a comment (!) before the INSTALL REMOVE GTMSECSHR."
+$ WRITE OUFILE "$!"
+$ IF .NOT. GTM$DEF_SYS
+$  THEN
+$   WRITE OUFILE "$ dir = F$ENVIRONMENT(""PROCEDURE"")"
+$   WRITE OUFILE "$ dir = F$PARSE(dir,,,""DEVICE"") + F$PARSE(dir,,,""DIRECTORY"")"
+$   WRITE OUFILE "$ @'dir'GTMLOGICALS.COM"
+$ ENDIF
+$ WRITE OUFILE "$ MUPIP := $GTM$DIST:MUPIP.EXE"
+$ WRITE OUFILE "$ STOP := $GTM$DIST:GTM$STOP"
+$ WRITE OUFILE "$ STOP 'P1'"
+$ WRITE OUFILE "$ MUPIP RUNDOWN"
+$ WRITE OUFILE "$ INSTALL REMOVE GTMSECSHR"
+$ WRITE OUFILE "$ EXIT"
+$ IF GTM$DEF_SYS THEN WRITE OUFILE "$ IF P2 .EQS. """" THEN P2 := /SYSTEM/EXEC"
+$ WRITE OUFILE "$ DEASSIGN 'P2' GTMSECSHR"
+$ CLOSE OUFILE
+$ VMI$CALLBACK MESSAGE I PREINS "Preparing files for installation."
+$!  GTMFILES.KIT must be maintained as kit contents change
+$ GTM$HLP_LOG == GTM$DST_LOG
+$ IF GTM$HLP_DIR THEN GTM$HLP_LOG :== VMI$ROOT:[SYSHLP]
+$ OPEN /WRITE OUFILE VMI$KWD:GTMFILES.KIT
+$ IF GTM$MGR_COM
+$  THEN
+$   WRITE OUFILE "GTM$ GTMINSTALL.COM VMI$ROOT:[SYSMGR] C"
+$   WRITE OUFILE "GTM$ GTMLOGICALS.COM VMI$ROOT:[SYSMGR] C"
+$   WRITE OUFILE "GTM$ GTMLOGIN.COM VMI$ROOT:[SYSMGR] C"
+$   WRITE OUFILE "GTM$ GTMSTART.COM VMI$ROOT:[SYSMGR] C"
+$   WRITE OUFILE "GTM$ GTMSTOP.COM VMI$ROOT:[SYSMGR] C"
+$ ENDIF
+$ WRITE OUFILE "GTM$ GTMINSTALL.COM ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMLOGICALS.COM ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMLOGIN.COM ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMSTART.COM ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMSTOP.COM ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ DSE.HLB ''GTM$HLP_LOG'"
+$ WRITE OUFILE "GTM$ GDE.HLB ''GTM$HLP_LOG'"
+$ WRITE OUFILE "GTM$ LKE.HLB ''GTM$HLP_LOG'"
+$ WRITE OUFILE "GTM$ MUMPS.HLB ''GTM$HLP_LOG'"
+$ WRITE OUFILE "GTM$ MUPIP.HLB ''GTM$HLP_LOG'"
+$ WRITE OUFILE "GTM$ GTMLIB.OLB ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMSHR.OLB ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMZCALL.MLB ''GTM$DST_LOG'"
+$ IF ALPHA
+$  THEN
+$   WRITE OUFILE "GTM$ GTM$DEFAULTS.M64 ''GTM$DST_LOG'"
+$  ELSE
+$   WRITE OUFILE "GTM$ GTM$DEFAULTS.MAR ''GTM$DST_LOG'"
+$ ENDIF
+$ WRITE OUFILE "GTM$ GTM$CE.H ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMCOLLECT.OPT ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMCOMMANDS.CLD ''GTM$DST_LOG' C"
+$ WRITE OUFILE "GTM$ *.M ''GTM$DST_LOG'"
+$ CLOSE OUFILE
+$!  GTMIMAGES.KIT must be maintained as kit contents change
+$ OPEN /WRITE OUFILE VMI$KWD:GTMIMAGES.KIT
+$ WRITE OUFILE "GTM$ GTMSECSHR.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTMSHR.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ DSE.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GDE.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTM$DMOD.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ LKE.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ MCOMPILE.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ MUPIP.EXE ''GTM$DST_LOG'"
+$ WRITE OUFILE "GTM$ GTM$STOP.EXE ''GTM$DST_LOG'"
+$ CLOSE OUFILE
+$!  Provide with file.KITs
+$ VMI$CALLBACK PROVIDE_FILE "" VMI$KWD:GTMFILES.KIT "" T
+$ VMI$CALLBACK PROVIDE_IMAGE "" VMI$KWD:GTMIMAGES.KIT "" T
+$ VMI$CALLBACK MESSAGE I FININS "Finalizing the installation."
+$ IF GTM$DEF_DCL THEN VMI$CALLBACK PROVIDE_DCL_COMMAND GTMCOMMANDS.CLD
+$ IF GTM$STARTDB THEN VMI$CALLBACK MODIFY_STARTUP_DB ADD GTMSTART.COM LPMAIN
+$!  GTM$INSTALL is TRUE if GTM$RUN_IVP or GTM$PCT_RTN
+$ IF GTM$INSTALL THEN VMI$CALLBACK SET POSTINSTALL YES
+$ IF GTM$RUN_IVP THEN VMI$CALLBACK SET IVP YES
+$ EXIT VMI$_SUCCESS
+$!
+$POSTINSTALL:
+$ ON CONTROL_Y THEN EXIT VMI$_FAILURE
+$! remove MUPIP from command tables for change from V2.4 to V2.5
+$ SET NOON
+$ DEFINE /USER_MODE SYS$OUTPUT NL:
+$ DEFINE /USER_MODE SYS$ERROR NL:
+$ SET COMMAND /TABLE=SYS$COMMON:[SYSLIB]DCLTABLES /OUTPUT=SYS$COMMON:[SYSLIB]DCLTABLES /DELETE=MUPIP
+$ DEFINE /USER_MODE SYS$OUTPUT NL:
+$ DEFINE /USER_MODE SYS$ERROR NL:
+$ SET COMMAND /DELETE=MUPIP
+$ SET ON
+$ IF GTM$MGR_COM
+$  THEN
+$   T1 := SYS$MANAGER:
+$  ELSE
+$   T1 = GTM$DST_LOG
+$ ENDIF
+$ @'T1'GTMSTART
+$ @'T1'GTMLOGIN
+$ ON CONTROL_Y THEN EXIT VMI$_FAILURE
+$ SET DEFAULT GTM$DIST
+$ T2 = F$ENVIRONMENT("PROTECTION")
+$ SET PROTECTION=(S=REWD,O=REWD,G=REWD,W=RE)/DEFAULT
+$ MUMPS GTM$DMOD.M
+$ IF GTM$LNK_LOG
+$  THEN
+$   T1 :=
+$  ELSE
+$   T1 :=,GTMLIB.OLB/LIB,GTMSHR.OLB/LIB
+$ ENDIF
+$ LINK GTM$DMOD.OBJ/NOTRACE'T1
+$ IF GTM$PCT_RTN
+$  THEN
+$   TYPE SYS$INPUT
+
+  Compiling the GT.M percent (%) routines.
+$   MUMPS *
+$   IF GTM$DOPURGE THEN PURGE *.*
+$   SET DEFAULT VMI$KWD
+$ ENDIF ! percent routines
+$ SET PROTECTION=('T2')/DEFAULT
+$ EXIT VMI$_SUCCESS
+$!
+$IVP:
+$!	The real Installation Verification Procedure.
+$ TYPE SYS$INPUT
+
+  GT.M  Installation Verification Procedure
+
+$!	Extract the IVP .COM file from the text library.
+$ LIBRARIAN /EXTRACT=GTM$IVP /OUTPUT=GTM$IVP.COM	GTM$IVP.TLB
+$ @GTM$IVP
+$ EXIT $STATUS
+$!
diff --git a/samples/DIGITAL Command Language/ghostpdl_zlib_make_vms.com b/samples/DIGITAL Command Language/ghostpdl_zlib_make_vms.com
new file mode 100644
index 00000000..65e9d0cb
--- /dev/null
+++ b/samples/DIGITAL Command Language/ghostpdl_zlib_make_vms.com	
@@ -0,0 +1,867 @@
+$! make libz under VMS written by
+$! Martin P.J. Zinser
+$!
+$! In case of problems with the install you might contact me at
+$! zinser@zinser.no-ip.info(preferred) or
+$! martin.zinser@eurexchange.com (work)
+$!
+$! Make procedure history for Zlib
+$!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20060120 First version to receive a number
+$! 0.02 20061008 Adapt to new Makefile.in
+$! 0.03 20091224 Add support for large file check
+$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
+$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
+$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
+$!               subdir path, update module search in makefile.in
+$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
+$!               shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$!               image
+$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
+$!               "" -> automatic, preference: MMK, MMS, built-in.
+$!
+$ on error then goto err_exit
+$!
+$ true  = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ tt = tmpnam + ".txt"
+$ tc = tmpnam + ".c"
+$ th = tmpnam + ".h"
+$ define/nolog tconfig 'th'
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ s_case   = False
+$!
+$! Setup variables holding "config" information
+$!
+$ Make    = "''p1'"
+$ name     = "Zlib"
+$ version  = "?.?.?"
+$ v_string = "ZLIB_VERSION"
+$ v_file   = "zlib.h"
+$ ccopt   = "/include = []"
+$ lopts   = ""
+$ dnsrl   = ""
+$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
+$ conf_check_string = ""
+$ linkonly = false
+$ optfile  = name + ".opt"
+$ mapfile  = name + ".map"
+$ libdefs  = ""
+$ vax      = f$getsyi("HW_MODEL").lt.1024
+$ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
+$ ia64     = f$getsyi("HW_MODEL").ge.4096
+$!
+$! 2012-03-05 SMS.
+$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then  set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
+$ mydef  = F$parse(whoami,,,"DEVICE")
+$ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
+$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
+$!
+$! Check for MMK/MMS
+$!
+$ if (Make .eqs. "")
+$ then
+$   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ else
+$   Make = f$edit( Make, "trim")
+$ endif
+$!
+$ gosub find_version
+$!
+$  open/write topt tmp.opt
+$  open/write optf 'optfile'
+$!
+$ gosub check_opts
+$!
+$! Look for the compiler used
+$!
+$ gosub check_compiler
+$ close topt
+$ close optf
+$!
+$ if its_decc
+$ then
+$   ccopt = "/prefix=all" + ccopt
+$   if f$trnlnm("SYS") .eqs. ""
+$   then
+$     if axp
+$     then
+$       define sys sys$library:
+$     else
+$       ccopt = "/decc" + ccopt
+$       define sys decc$library_include:
+$     endif
+$   endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
+$!
+$   if axp .or. ia64
+$   then
+$       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
+$       s_case = true
+$   endif
+$ endif
+$ if its_vaxc .or. its_gnuc
+$ then
+$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ endif
+$!
+$! Build a fake configure input header
+$!
+$ open/write conf_hin config.hin
+$ write conf_hin "#undef _LARGEFILE64_SOURCE"
+$ close conf_hin
+$!
+$!
+$ i = 0
+$FIND_ACONF:
+$ fname = f$element(i,"#",aconf_in_file)
+$ if fname .eqs. "#" then goto AMISS_ERR
+$ if f$search(fname) .eqs. ""
+$ then
+$   i = i + 1
+$   goto find_aconf
+$ endif
+$ open/read/err=aconf_err aconf_in 'fname'
+$ open/write aconf zconf.h
+$ACONF_LOOP:
+$ read/end_of_file=aconf_exit aconf_in line
+$ work = f$edit(line, "compress,trim")
+$ if f$extract(0,6,work) .nes. "#undef"
+$ then
+$   if f$extract(0,12,work) .nes. "#cmakedefine"
+$   then
+$       write aconf line
+$   endif
+$ else
+$   cdef = f$element(1," ",work)
+$   gosub check_config
+$ endif
+$ goto aconf_loop
+$ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
+$ write aconf "#define VMS 1"
+$ write aconf "#include <unistd.h>"
+$ write aconf "#include <unixio.h>"
+$ write aconf "#ifdef _LARGEFILE"
+$ write aconf "# define off64_t __off64_t"
+$ write aconf "# define fopen64 fopen"
+$ write aconf "# define fseeko64 fseeko"
+$ write aconf "# define lseek64 lseek"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
+$ write aconf "#endif"
+$ close aconf_in
+$ close aconf
+$ if f$search("''th'") .nes. "" then delete 'th';*
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if make.eqs.""
+$ then
+$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
+$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+                adler32.c zlib.h zconf.h
+$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+                compress.c zlib.h zconf.h
+$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+                crc32.c zlib.h zconf.h
+$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+                deflate.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
+                gzclose.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
+                gzlib.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
+                gzread.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
+                gzwrite.c zutil.h zlib.h zconf.h
+$   CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
+                infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+                inffast.c zutil.h zlib.h zconf.h inffast.h
+$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+                inflate.c zutil.h zlib.h zconf.h infblock.h
+$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+                inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+                trees.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+                uncompr.c zlib.h zconf.h
+$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+                zutil.c zutil.h zlib.h zconf.h
+$   write sys$output "Building Zlib ..."
+$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$   write sys$output "Building example..."
+$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
+                [.test]example.c zlib.h zconf.h
+$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$   write sys$output "Building minigzip..."
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
+              [.test]minigzip.c zlib.h zconf.h
+$   call make minigzip.exe -
+              "LINK minigzip,libz.olb/lib" -
+              minigzip.obj libz.olb
+$ else
+$   gosub crea_mms
+$   write sys$output "Make ''name' ''version' with ''Make' "
+$   'make'
+$ endif
+$!
+$! Create shareable image
+$!
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call map_2_shopt 'mapfile' 'optfile'
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
+$ write sys$output "Zlib build completed"
+$ delete/nolog tmp.opt;*
+$ exit
+$AMISS_ERR:
+$ write sys$output "No source for config.hin found."
+$ write sys$output "Tried any of ''aconf_in_file'"
+$ goto err_exit
+$CC_ERR:
+$ write sys$output "C compiler required to build ''name'"
+$ goto err_exit
+$ERR_EXIT:
+$ set message/facil/ident/sever/text
+$ close/nolog optf
+$ close/nolog topt
+$ close/nolog aconf_in
+$ close/nolog aconf
+$ close/nolog out
+$ close/nolog min
+$ close/nolog mod
+$ close/nolog h_in
+$ write sys$output "Exiting..."
+$ exit 2
+$!
+$!
+$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8  What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$       Argument = P'arg
+$       If Argument .Eqs. "" Then Goto Exit
+$       El=0
+$Loop2:
+$       File = F$Element(El," ",Argument)
+$       If File .Eqs. " " Then Goto Endl
+$       AFile = ""
+$Loop3:
+$       OFile = AFile
+$       AFile = F$Search(File)
+$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$       Goto Loop3
+$NextEL:
+$       El = El + 1
+$       Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Check command line options and set symbols accordingly
+$!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20041206 First version to receive a number
+$! 0.02 20060126 Add new "HELP" target
+$ CHECK_OPTS:
+$ i = 1
+$ OPT_LOOP:
+$ if i .lt. 9
+$ then
+$   cparm = f$edit(p'i',"upcase")
+$!
+$! Check if parameter actually contains something
+$!
+$   if f$edit(cparm,"trim") .nes. ""
+$   then
+$     if cparm .eqs. "DEBUG"
+$     then
+$       ccopt = ccopt + "/noopt/deb"
+$       lopts = lopts + "/deb"
+$     endif
+$     if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
+$     then
+$       start = f$locate("=",cparm) + 1
+$       len   = f$length(cparm) - start
+$       ccopt = ccopt + f$extract(start,len,cparm)
+$       if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+          then s_case = true
+$     endif
+$     if cparm .eqs. "LINK" then linkonly = true
+$     if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$     then
+$       start = f$locate("=",cparm) + 1
+$       len   = f$length(cparm) - start
+$       lopts = lopts + f$extract(start,len,cparm)
+$     endif
+$     if f$locate("CC=",cparm) .lt. f$length(cparm)
+$     then
+$       start  = f$locate("=",cparm) + 1
+$       len    = f$length(cparm) - start
+$       cc_com = f$extract(start,len,cparm)
+        if (cc_com .nes. "DECC") .and. -
+           (cc_com .nes. "VAXC") .and. -
+           (cc_com .nes. "GNUC")
+$       then
+$         write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$         write sys$output "Use DECC, VAXC, or GNUC instead"
+$       else
+$         if cc_com .eqs. "DECC" then its_decc = true
+$         if cc_com .eqs. "VAXC" then its_vaxc = true
+$         if cc_com .eqs. "GNUC" then its_gnuc = true
+$       endif
+$     endif
+$     if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$     then
+$       start  = f$locate("=",cparm) + 1
+$       len    = f$length(cparm) - start
+$       mmks = f$extract(start,len,cparm)
+$       if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$       then
+$         make = mmks
+$       else
+$         write sys$output "Unsupported make choice ''mmks' ignored"
+$         write sys$output "Use MMK or MMS instead"
+$       endif
+$     endif
+$     if cparm .eqs. "HELP" then gosub bhelp
+$   endif
+$   i = i + 1
+$   goto opt_loop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Look for the compiler used
+$!
+$! Version history
+$! 0.01 20040223 First version to receive a number
+$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
+$! 0.03 20060202 Extend handling of GNU C
+$! 0.04 20090402 Compaq -> hp
+$CHECK_COMPILER:
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then
+$   its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
+$   its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
+$   its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
+$ endif
+$!
+$! Exit if no compiler available
+$!
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then goto CC_ERR
+$ else
+$   if its_decc
+$   then
+$     write sys$output "CC compiler check ... hp C"
+$     if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
+$     then
+$       dnrsl = f$trnlnm("decc$no_rooted_search_lists")
+$     endif
+$     define/nolog decc$no_rooted_search_lists 1
+$   else
+$     if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$     if its_gnuc
+$     then
+$         write sys$output "CC compiler check ... GNU C"
+$         if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
+$         if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
+$         cc = "gcc"
+$     endif
+$     if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
+$     if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
+$   endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! If MMS/MMK are available dump out the descrip.mms if required
+$!
+$CREA_MMS:
+$ write sys$output "Creating descrip.mms..."
+$ create descrip.mms
+$ open/append out descrip.mms
+$ copy sys$input: out
+$ deck
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser
+# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
+       gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
+       deflate.obj, trees.obj, zutil.obj, inflate.obj, \
+       inftrees.obj, inffast.obj
+
+$ eod
+$ write out "CFLAGS=", ccopt
+$ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
+$ copy sys$input: out
+$ deck
+        @ write sys$output " Example applications available"
+
+libz.olb : libz.olb($(OBJS))
+	@ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+              link $(LOPTS) example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+              link $(LOPTS) minigzip,libz.olb/lib
+
+clean :
+	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
+
+
+# Other dependencies.
+adler32.obj  : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj    : crc32.c zutil.h zlib.h zconf.h
+deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj  : [.test]example.c zlib.h zconf.h
+gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
+gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
+gzread.obj   : gzread.c zutil.h zlib.h zconf.h
+gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
+inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj  : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : [.test]minigzip.c zlib.h zconf.h
+trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj  : uncompr.c zlib.h zconf.h
+zutil.obj    : zutil.c zutil.h zlib.h zconf.h
+infback.obj  : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ eod
+$ close out
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Read list of core library sources from makefile.in and create options
+$! needed to build shareable image
+$!
+$CREA_OLIST:
+$ open/read min makefile.in
+$ open/write mod modules.opt
+$ src_check_list = "OBJZ =#OBJG ="
+$MRLOOP:
+$ read/end=mrdone min rec
+$ i = 0
+$SRC_CHECK_LOOP:
+$ src_check = f$element(i, "#", src_check_list)
+$ i = i+1
+$ if src_check .eqs. "#" then goto mrloop
+$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
+$ rec = rec - src_check
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
+$MRSLOOP:
+$ read/end=mrdone min rec
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
+$MRDONE:
+$ close min
+$ close mod
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Take record extracted in crea_olist and split it into single filenames
+$!
+$EXTRA_FILNAM:
+$ myrec = f$edit(rec - "\", "trim,compress")
+$ i = 0
+$FELOOP:
+$ srcfil = f$element(i," ", myrec)
+$ if (srcfil .nes. " ")
+$ then
+$   write mod f$parse(srcfil,,,"NAME"), ".obj"
+$   i = i + 1
+$   goto feloop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Find current Zlib version number
+$!
+$FIND_VERSION:
+$ open/read h_in 'v_file'
+$hloop:
+$ read/end=hdone h_in rec
+$ rec = f$edit(rec,"TRIM")
+$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
+$ rec = f$edit(rec - "#", "TRIM")
+$ if f$element(0," ",rec) .nes. "define" then goto hloop
+$ if f$element(1," ",rec) .eqs. v_string
+$ then
+$   version = 'f$element(2," ",rec)'
+$   goto hdone
+$ endif
+$ goto hloop
+$hdone:
+$ close h_in
+$ return
+$!------------------------------------------------------------------------------
+$!
+$CHECK_CONFIG:
+$!
+$ in_ldef = f$locate(cdef,libdefs)
+$ if (in_ldef .lt. f$length(libdefs))
+$ then
+$   write aconf "#define ''cdef' 1"
+$   libdefs = f$extract(0,in_ldef,libdefs) + -
+              f$extract(in_ldef + f$length(cdef) + 1, -
+                        f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
+                        libdefs)
+$ else
+$   if (f$type('cdef') .eqs. "INTEGER")
+$   then
+$     write aconf "#define ''cdef' ", 'cdef'
+$   else
+$     if (f$type('cdef') .eqs. "STRING")
+$     then
+$       write aconf "#define ''cdef' ", """", '''cdef'', """"
+$     else
+$       gosub check_cc_def
+$     endif
+$   endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check if this is a define relating to the properties of the C/C++
+$! compiler
+$!
+$ CHECK_CC_DEF:
+$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
+$ then
+$   copy sys$input: 'tc'
+$   deck
+#include "tconfig"
+#define _LARGEFILE
+#include <stdio.h>
+
+int main(){
+FILE *fp;
+  fp = fopen("temp.txt","r");
+  fseeko(fp,1,SEEK_SET);
+  fclose(fp);
+}
+
+$   eod
+$   test_inv = false
+$   comm_h = false
+$   gosub cc_prop_check
+$   return
+$ endif
+$ write aconf "/* ", line, " */"
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler
+$!
+$! Version history
+$! 0.01 20031020 First version to receive a number
+$! 0.02 20031022 Added logic for defines with value
+$! 0.03 20040309 Make sure local config file gets not deleted
+$! 0.04 20041230 Also write include for configure run
+$! 0.05 20050103 Add processing of "comment defines"
+$CC_PROP_CHECK:
+$ cc_prop = true
+$ is_need = false
+$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
+$ if f$search(th) .eqs. "" then create 'th'
+$ set message/nofac/noident/nosever/notext
+$ on error then continue
+$ cc 'tmpnam'
+$ if .not. ($status)  then cc_prop = false
+$ on error then continue
+$! The headers might lie about the capabilities of the RTL
+$ link 'tmpnam',tmp.opt/opt
+$ if .not. ($status)  then cc_prop = false
+$ set message/fac/ident/sever/text
+$ on error then goto err_exit
+$ delete/nolog 'tmpnam'.*;*/exclude='th'
+$ if (cc_prop .and. .not. is_need) .or. -
+     (.not. cc_prop .and. is_need)
+$ then
+$   write sys$output "Checking for ''cdef'... yes"
+$   if f$type('cdef_val'_yes) .nes. ""
+$   then
+$     if f$type('cdef_val'_yes) .eqs. "INTEGER" -
+         then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
+$     if f$type('cdef_val'_yes) .eqs. "STRING" -
+         then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
+$   else
+$     call write_config f$fao("#define !AS 1",cdef)
+$   endif
+$   if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
+       (cdef .eqs. "_LARGEFILE64_SOURCE") then -
+      call write_config f$string("#define _LARGEFILE 1")
+$ else
+$   write sys$output "Checking for ''cdef'... no"
+$   if (comm_h)
+$   then
+      call write_config f$fao("/* !AS */",line)
+$   else
+$     if f$type('cdef_val'_no) .nes. ""
+$     then
+$       if f$type('cdef_val'_no) .eqs. "INTEGER" -
+           then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
+$       if f$type('cdef_val'_no) .eqs. "STRING" -
+           then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
+$     else
+$       call write_config f$fao("#undef !AS",cdef)
+$     endif
+$   endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler with multiple result values
+$!
+$! Version history
+$! 0.01 20040127 First version
+$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
+$CC_MPROP_CHECK:
+$ cc_prop = true
+$ i    = 1
+$ idel = 1
+$ MT_LOOP:
+$ if f$type(result_'i') .eqs. "STRING"
+$ then
+$   set message/nofac/noident/nosever/notext
+$   on error then continue
+$   cc 'tmpnam'_'i'
+$   if .not. ($status)  then cc_prop = false
+$   on error then continue
+$! The headers might lie about the capabilities of the RTL
+$   link 'tmpnam'_'i',tmp.opt/opt
+$   if .not. ($status)  then cc_prop = false
+$   set message/fac/ident/sever/text
+$   on error then goto err_exit
+$   delete/nolog 'tmpnam'_'i'.*;*
+$   if (cc_prop)
+$   then
+$     write sys$output "Checking for ''cdef'... ", mdef_'i'
+$     if f$type(mdef_'i') .eqs. "INTEGER" -
+         then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
+$     if f$type('cdef_val'_yes) .eqs. "STRING" -
+         then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
+$     goto msym_clean
+$   else
+$     i = i + 1
+$     goto mt_loop
+$   endif
+$ endif
+$ write sys$output "Checking for ''cdef'... no"
+$ call write_config f$fao("#undef !AS",cdef)
+$ MSYM_CLEAN:
+$ if (idel .le. msym_max)
+$ then
+$   delete/sym mdef_'idel'
+$   idel = idel + 1
+$   goto msym_clean
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Write configuration to both permanent and temporary config file
+$!
+$! Version history
+$! 0.01 20031029 First version to receive a number
+$!
+$WRITE_CONFIG: SUBROUTINE
+$  write aconf 'p1'
+$  open/append confh 'th'
+$  write confh 'p1'
+$  close confh
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Analyze the project map file and create the symbol vector for a shareable
+$! image from it
+$!
+$! Version history
+$! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
+$!
+$ MAP_2_SHOPT: Subroutine
+$!
+$ SAY := "WRITE_ SYS$OUTPUT"
+$!
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$    SAY "MAP_2_SHOPT-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
+$    goto exit_m2s
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$    SAY "MAP_2_SHOPT:  Error, no output file provided"
+$    goto exit_m2s
+$ ENDIF
+$!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
+$ open/read map 'p1
+$ if axp .or. ia64
+$ then
+$     open/write aopt a.opt
+$     open/write bopt b.opt
+$     write aopt " CASE_SENSITIVE=YES"
+$     write bopt "SYMBOL_VECTOR= (-"
+$     mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ MOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        		       f$edit(shared_proc,"upcase"),shared_proc)
+$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$             mod_in = mod_in + 1
+$             goto mod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto mod_sym_loop
+$     endif
+$MAP_LOOP:
+$     read/end=map_end map line
+$     if (f$locate("{",line).lt. f$length(line)) .or. -
+         (f$locate("global:", line) .lt. f$length(line))
+$     then
+$         proc = true
+$         goto map_loop
+$     endif
+$     if f$locate("}",line).lt. f$length(line) then proc = false
+$     if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     if proc
+$     then
+$         shared_proc = f$edit(line,"collapse")
+$         chop_semi = f$locate(";", shared_proc)
+$         if chop_semi .lt. f$length(shared_proc) then -
+              shared_proc = f$extract(0, chop_semi, shared_proc)
+$         write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        			 f$edit(shared_proc,"upcase"),shared_proc)
+$         write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$     endif
+$     goto map_loop
+$MAP_END:
+$     close/nolog aopt
+$     close/nolog bopt
+$     open/append libopt 'p2'
+$     open/read aopt a.opt
+$     open/read bopt b.opt
+$ALOOP:
+$     read/end=aloop_end aopt line
+$     write libopt line
+$     goto aloop
+$ALOOP_END:
+$     close/nolog aopt
+$     sv = ""
+$BLOOP:
+$     read/end=bloop_end bopt svn
+$     if (svn.nes."")
+$     then
+$        if (sv.nes."") then write libopt sv
+$        sv = svn
+$     endif
+$     goto bloop
+$BLOOP_END:
+$     write libopt f$extract(0,f$length(sv)-2,sv), "-"
+$     write libopt ")"
+$     close/nolog bopt
+$     delete/nolog/noconf a.opt;*,b.opt;*
+$ else
+$     if vax
+$     then
+$     open/append libopt 'p2'
+$     mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ VMOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$             mod_in = mod_in + 1
+$             goto vmod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto vmod_sym_loop
+$     endif
+$VMAP_LOOP:
+$     	  read/end=vmap_end map line
+$     	  if (f$locate("{",line).lt. f$length(line)) .or. -
+   	      (f$locate("global:", line) .lt. f$length(line))
+$     	  then
+$     	      proc = true
+$     	      goto vmap_loop
+$     	  endif
+$     	  if f$locate("}",line).lt. f$length(line) then proc = false
+$     	  if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     	  if proc
+$     	  then
+$     	      shared_proc = f$edit(line,"collapse")
+$     	      chop_semi = f$locate(";", shared_proc)
+$     	      if chop_semi .lt. f$length(shared_proc) then -
+      	  	  shared_proc = f$extract(0, chop_semi, shared_proc)
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$     	  endif
+$     	  goto vmap_loop
+$VMAP_END:
+$     else
+$         write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
+$         write sys$output "No options file created"
+$     endif
+$ endif
+$ EXIT_M2S:
+$ close/nolog map
+$ close/nolog libopt
+$ endsubroutine
diff --git a/samples/DIGITAL Command Language/libxslt_build.com b/samples/DIGITAL Command Language/libxslt_build.com
new file mode 100644
index 00000000..89371f01
--- /dev/null
+++ b/samples/DIGITAL Command Language/libxslt_build.com	
@@ -0,0 +1,342 @@
+$! BUILD_XSLT.COM
+$!
+$! Build the XSLT library
+$!
+$! Arguments:
+$!
+$!	p1	- "DEBUG" is you want to build with debug
+$!
+$! This package requires libxml to have already been installed.  You need
+$! to ensure that the logical name LIBXML is defined and points to the 
+$! directory containing libxml's .h files
+$!
+$! This procedure creates the object libraries
+$!
+$!	XML_LIBDIR:LIBXSLT.OLB
+$!	XML_LIBDIR:LIBEXSLT.OLB
+$!
+$! and the program
+$!
+$!	XSLTPROC
+$!
+$! After the library is built, you can link these routines into
+$! your code with the command  
+$!
+$! 	LINK your_modules,XML_LIBDIR:LIBEXSLT/LIB,LIBXSLT/LIBRARY,LIBXML/LIB
+$!
+$! Change History
+$! --------------
+$! Command file author : John A Fotheringham (jaf@jafsoft.com)
+$! Last update         : 2 Nov 2001
+$! 
+$!- configuration -------------------------------------------------------------
+$!
+$!- compile command.
+$!
+$   cc_opts = "/INCLUDE=([],XML_SRCDIR:,[-.libxslt])/NAMES=(SHORTENED)/FLOAT=IEEE/IEEE_MODE=DENORM_RESULTS"
+$!
+$   if p1.eqs."DEBUG"
+$   then
+$     debug = "Y"
+$     cc_command = "CC''cc_opts'/DEBUG/NOOPTIMIZE/LIST/SHOW=ALL"
+$   else
+$     debug = "N"
+$     cc_command = "CC''cc_opts'"
+$   endif
+$!
+$!- configure multiple build passes for each library. -------------------------
+$!
+$!  For each pass:
+$!
+$!  "libname" is the name of the library or module being created
+$!
+$!  "progname" is the name of the program being created
+$!
+$!  "src" is the list of sources to be built into the library  or program
+$!	- This should be compared to the definition of 
+$!	  "<NAME>_la_SOURCES" in the MAKEFILE.IN file in 
+$!	  corresponding directory.
+$!
+$   num_passes = 3	! two libraries and a program
+$!
+$!- pass 1 - library LIBXSLT
+$!
+$   libname_1  = "LIBXSLT"
+$   h_file_1   = "xslt.h"
+$   progname_1 = ""
+$!
+$   ! see "libxslt_la_SOURCES" in [.libxslt]makefile.in
+$   src_1 = "xslt.c xsltutils.c pattern.c templates.c variables.c keys.c"
+$   src_1 = src_1 + " numbers.c extensions.c extra.c functions.c"
+$   src_1 = src_1 + " namespaces.c imports.c attributes.c documents.c"
+$   src_1 = src_1 + " preproc.c transform.c security.c"
+$!
+$!- pass 2 - library LIBEXSLT
+$!
+$   libname_2  = "LIBEXSLT"
+$   h_file_2   = "exslt.h"
+$   progname_2 = ""
+$!
+$   ! see "libexslt_la_SOURCES" in [.libexslt]makefile.in
+$   src_2   = "exslt.c common.c math.c sets.c functions.c strings.c date.c saxon.c dynamic.c"
+$!
+$!- pass 3 - program XSLTPROC
+$!
+$   libname_3  = ""
+$   h_file_3   = ""
+$   progname_3 = "XSLTPROC"
+$!
+$   ! see "xsltproc_SOURCES" in [.xsltproc]makefile.in
+$   src_3   = "xsltproc.c"
+$!
+$!- set up and check logicals  -----------------------------------------------
+$!
+$!  XML_LIBDIR - object library directory
+$!  XML_SRCDIR - top-level build directory of libxml package -- needed for config.h and trio.h
+$!  LIBXML - source directory containing .h files for libxml package
+$!
+$   if f$trnlnm("XML_LIBDIR").eqs.""
+$   then
+$     on error then continue
+$     globfile = f$search("[--...]libxml.olb")
+$     if globfile.eqs.""
+$     then
+$       write sys$output ""
+$       write sys$output "	You need to define the XML_LIBDIR logical name to"
+$       write sys$output "	point to the directory containing your object"
+$       write sys$output "	libraries.  This should already contain LIBXML.OLB"
+$       write sys$output "	from the libxml package, and will be the directory"
+$       write sys$output "	the new LIBXSLT.OLB library will be placed in"
+$       write sys$output ""
+$       exit
+$     else
+$	srcdir = f$parse(globfile,,,"DEVICE") + f$parse(globfile,,,"DIRECTORY")
+$	define/process XML_LIBDIR "''srcdir'"
+$       write sys$output "Defining XML_LIBDIR as ""''srcdir'"""
+$     endif
+$   endif
+$!
+$   if f$trnlnm("libxml").eqs.""
+$   then
+$     ! look for globals.h in a directory installed paralle to this one
+$     on error then continue
+$     globfile = f$search("[--...]globals.h")
+$     if globfile.eqs.""
+$     then
+$       write sys$output ""
+$       write sys$output "	You need to define a LIBXML logical directory to"
+$       write sys$output "	point to the directory containing the .h files"
+$       write sys$output "	for the libxml package"
+$       write sys$output ""
+$       exit
+$     else
+$	srcdir = f$element(0,"]",globfile)+ "]"
+$	define/process LIBXML "''srcdir'"
+$       write sys$output "Defining LIBXML as ""''srcdir'"""
+$     endif
+$   endif
+$!
+$   if f$trnlnm("XML_SRCDIR").eqs.""
+$   then
+$     globfile = f$search("[--...]globals.c")
+$     if globfile.eqs.""
+$     then
+$	write sys$output "Can't locate globals.c.  You need to manually define a XML_SRCDIR logical"
+$	exit
+$     else
+$	srcdir = f$parse(globfile,,,"DEVICE") + f$parse(globfile,,,"DIRECTORY")
+$	define/process XML_SRCDIR "''srcdir'"
+$       write sys$output "Defining XML_SRCDIR as ""''srcdir'"""
+$     endif
+$   endif
+$!
+$!- set up some working logicals -------------------
+$!
+$ pass_no = 1
+$ set_pass_logical:
+$!
+$   if pass_no.le.num_passes
+$   then
+$!
+$     Libname  = libname_'pass_no'
+$     progname = progname_'pass_no'
+$     if libname.nes.""
+$     then
+$       logname  = "''libname'_SRCDIR"
+$     else
+$       logname  = "''progname'_SRCDIR"
+$     endif
+$     findfile = f$element(0," ",src_'pass_no')
+$!
+$!--- set up a source directory logical
+$!
+$     if f$trnlnm("''logname'").eqs.""
+$     then
+$       ! look for the target file in a parallel subdirectory
+$       globfile = f$search("[-...]''findfile'")
+$       if globfile.eqs.""
+$       then
+$  	  write sys$output "Can't locate ''findfile'.  You need to manually define a ''logname' logical"
+$	  exit
+$       else
+$  	  srcdir = f$element(0,"]",globfile)+ "]"
+$	  define/process 'logname' "''srcdir'"
+$         write sys$output "Defining ''logname' as ""''srcdir'"""
+$       endif
+$     endif
+$!
+$!--- if it's a library, set up a logical pointing to the .h files
+$!
+$     if libname.nes."" 
+$     then
+$	if f$trnlnm("''libname'").eqs."" 
+$       then 
+$         ! look for the target .h file in a parallel subdirectory
+$  	  h_file = h_file_'pass_no'
+$         globfile = f$search("[-...]''h_file'")
+$         if globfile.eqs.""
+$         then
+$	    write sys$output "Can't locate ''h_file'.  You need to manually define a ''libname' logical"
+$	    exit
+$         else
+$	    includedir = f$element(0,"]",globfile)+ "]"
+$	    define/process 'libname' "''includedir'"
+$           write sys$output "Defining ''libname' as ""''includedir'"""
+$	  endif
+$       endif
+$     endif
+$!
+$     pass_no = pass_no +1
+$     goto set_pass_logical
+$!
+$   endif	! for each pass
+$!
+$!- set up error handling (such as it is) -------------------------------------
+$!
+$ exit_status = 1
+$ saved_default = f$environment("default")
+$ on error then goto ERROR_OUT 
+$ on control_y then goto ERROR_OUT 
+$!
+$ goto start_here
+$ start_here:	  ! move this line to debug/rerun parts of this command file
+$!
+$!- compile modules into the library ------------------------------------------
+$!
+$!
+$ pass_no = 1	! make three passes, one for each library, one for XSLTPROC
+$ pass_loop:
+$!
+$ if pass_no.le.num_passes
+$ then
+$   Libname  = libname_'pass_no'
+$   progname = progname_'pass_no'
+$   if libname.nes.""
+$   then
+$     logname  = "''libname'_SRCDIR"
+$     pass_description = "the XML_LIBDIR:''libname'.OLB object library"
+$   else
+$     logname  = "''progname'_SRCDIR"
+$     pass_description = "the programs in ''progname'"
+$   endif
+$   src  = src_'pass_no'
+$!
+$!- create the library if need
+$!
+$   if libname.nes."" 
+$   then
+$     if f$search("XML_LIBDIR:''libname'.OLB").eqs."" 
+$     then
+$       write sys$output "Creating new object library XML_LIBDIR:''libname'.OLB..."
+$       library/create XML_LIBDIR:'libname'.OLB
+$     endif
+$   endif
+$!
+$!- move to the source directory 
+$!
+$   set def 'logname'
+$!
+$!- define the library and link commands (link command not used as is)
+$!
+$   if libname.nes.""
+$   then
+$     lib_command  = "LIBRARY/REPLACE XML_LIBDIR:''libname'.OLB"
+$     link_command = ""
+$   else
+$     lib_command  = ""
+$     link_command = "LINK"
+$   endif
+$!
+$   write sys$output ""
+$   write sys$output "Building ''pass_description'
+$   write sys$output ""
+$!
+$   s_no = 0
+$   src = f$edit(src,"COMPRESS")
+$!
+$ source_loop:
+$!
+$     next_source = f$element (S_no," ",src)
+$     if next_source.nes."" .and. next_source.nes." "
+$     then
+$       call build 'next_source'
+$       s_no = s_no + 1
+$       goto source_loop
+$     endif
+$!
+$     pass_no = pass_no + 1
+$     goto pass_loop
+$!
+$   endif	! for each pass
+$!
+$!- Th-th-th-th-th-that's all folks! ------------------------------------------
+$!
+$EXIT_OUT:
+$!
+$ set def 'saved_default
+$ exit 'exit_status
+$!
+$
+$ERROR_OUT:
+$ exit_status = $status
+$ write sys$output "''f$message(exit_status)'"
+$ goto EXIT_OUT
+$!
+$!- the BUILD subroutine.  Compile then insert into library or link as required
+$!
+$BUILD: subroutine
+$   on warning then goto EXIT_BUILD
+$   source_file = p1
+$   name = f$element(0,".",source_file)
+$   object_file = f$fao("XML_LIBDIR:!AS.OBJ",name)
+$!
+$!- compile
+$   write sys$output "Compiling ",p1,p2,"..."
+$   cc_command /object='object_file 'source_file' 'p2'
+$!
+$!- insert into library if command defined
+$!
+$   if lib_command.nes.""  
+$   then 
+$     lib_command 'object_file'
+$     delete/nolog 'object_file';*
+$   endif
+$!
+$!- link module if command defined
+$!
+$   if link_command.nes."" 
+$   then
+$	text = f$element(0,".",p1)	! lose the ".c"
+$	write sys$output "Linking ",text,"..."
+$	dbgopts = ""
+$	if debug then dbgopts = "/DEBUG"
+$	link_command'dbgopts' 'object_file',-
+      		XML_LIBDIR:libexslt/lib,-
+      		XML_LIBDIR:libxslt/lib,-
+      		XML_LIBDIR:libxml/library
+$   endif
+$!
+$EXIT_BUILD:
+$   exit $status
+$!
+$endsubroutine
diff --git a/samples/DIGITAL Command Language/vmsbackup_build.com b/samples/DIGITAL Command Language/vmsbackup_build.com
new file mode 100644
index 00000000..c6cb4cab
--- /dev/null
+++ b/samples/DIGITAL Command Language/vmsbackup_build.com	
@@ -0,0 +1,10 @@
+$! Compiling with VAXC is said to work, but it requires the usual cruft
+$! (vaxcrtl and all), and to avoid hair we don't supply said cruft here.
+$ CC/DECC/PREFIX=all VMSBACKUP.C/DEFINE=(HAVE_MT_IOCTLS=0,HAVE_UNIXIO_H=1)
+$ CC/DECC/PREFIX=all DCLMAIN.C
+$! Probably we don't want match as it probably doesn't implement VMS-style
+$! matching, but I haven't looking into the issues yet.
+$ CC/DECC/PREFIX=all match
+$ LINK/exe=VMSBACKUP.EXE -
+vmsbackup.obj,dclmain.obj,match.obj,sys$input/opt
+identification="VMSBACKUP4.1.1"