KevinMidboe/linguist
1
0
Fork 0
mirror of https://github.com/KevinMidboe/linguist.git synced 2025-10-29 01:30:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
master
linguist/samples/RUNOFF/longlib.rno
Alhadis 93341be396 Add language definition and samples for RUNOFF
2016-07-21 08:41:05 +10:00

8645 lines
324 KiB
Plaintext
Raw Permalink Blame History

.! documentation for the LONGLIB graphics routines and library
.! *** LAST REVISED ON 16-MAR-1988 08:22:32.49
.! *** SOURCE FILE: [DL.GRAPHICS.LONGLIB]LONGLIB.RNO
.lm0.rm66.ps59,66
-
.s12
.flags index ~
.c;The LONGLIB Graphics Library
.s2
.c;Version 5.1
.s3
.flags substitute
.c;$$Month#$$Day,#$$Year
.no flags substitute
.no flags accept
.s5
.c;David Long
.s1
.c;Jet Propulsion Laboratory
.c;4800 Oak Grove Drive
.c;Pasadena, California 91109
.pg
.! note: TOC stuff is for VMS 3.x and is not required for VMS 4.0
.style headers 6
.send TOC .layout 1,3
.send TOC .rm 70
.send TOC .display number rl
.send TOC .c;Table of Contents
.send TOC .sk
.require "LONGLIB.RNT"
.display number d
.lm0.rm66.ps59,66
.pg.f.j
.s3
.CHAPTER Introduction
.hl 1 General
.p
This manual was prepared to document the LONGLIB graphics library.
This latest revision of the library has been extensively modified though
every effort has been made to make any changes or additions to the library
compatible with previous versions of the LONGLIB graphics library.
It is anticipated that additional MASTER subroutines will be incorporated
in the future as they are needed.
.p
The LONGLIB graphics library is a set of FORTRAN subroutines for vector
plotting (line graphics). The library is similar to CALCOMP;
however, a great many extensions
are incorporated into the LONGLIB library including viewport
clipping, plot rotation, etc. In addition,
the LONGLIB library includes a large set of routines
for such things as 3-d plotting (with hidden line removal), extended character
sets, MASTER routines, graphics input routines, map routines, etc.
.p
The LONGLIB library is designed with three internal packages for plotting
on 3 major classes of output graphics devices: graphics terminals,
Ramtek display screens, and hardcopy devices via metafiles.
A large variety of graphics terminals are supported. Graphics output
to each type of device is discussed below. LONGLIB achieves virtual
output device independence by using only a minimum of low-level commands.
These include: initialization, a screen clear/new page command,
and drawing a vector. In addition, line types and color are utilized if
available. Graphics terminal and Ramtek output also support additional
features. Hardcopy devices which require rasterization are also supported
using the Metafile.
.p
The library is principally designed for vector (i.e. line plotting).
Lines are drawn by specifying the movement of an "electronic pen".
The color, width, and pattern of up/down motions in a line (the
line type) may be specified. The library consists of various subroutines which,
when called by a user written program, will produce line drawings on the desired
graphics device(s). The system is interactive in the sense that
the user can see and modify plots immediately (on screen devices).
The library can also produce a ~metafile which can then be processed by
programs supplied with the LONGLIB library to produce
hardcopy output on a variety of hardcopy devices.
Provisions have been incorporated for device-dependent graphics input to a
program (see ~CURSOR routines).
.p
The library is designed with several levels of graphics routine users in mind.
For the user who simply wants to obtain a plot of an array of data with a
minimum of effort, the ~MASTER routines offer a simple solution. These routines
handle opening/closing the plot package, scaling, and axis generation, etc,
a wide variety of formats.
For the user interested in more elaborate plots, access to several levels
of the plotting routines are provided.
.x LINSEQ
.x line type
.x color
.p
The LONGLIB graphics library supports both line type (such as
pen width and dot-dash patterns) and color attributes. In general, these
attributes are device dependent and specific line types or colors used on
one plotting device may appear differently on a second device.
Typically, line width is simulated for graphics terminals while line
typing relies on hardware support. A routine for software generation
of line types (LINSEQ) has been provided.
.hl1 Machine Dependence
.x machine dependent
.p
LONGLIB was developed in a ~VAX/VMS environment and is written exclusively
in FORTRAN. While some machine-specific routines have been retained,
the present version of the library has been made as ~FORTRAN-77 compatible
as practical. Where the code is not FORTRAN-77 compatible, it is so noted
in the source code. These exceptions
were made for efficiency's sake and can be easily be modified or
be left out of the final library. The largest FORTRAN-77 incompatibilities
(outside of the Ramtek packages) occur when treating ~character ~string data
(see notes below).
.p
The auxilary, MASTER, and 3d plotting routines are FORTRAN-77 compatible
with a few minor exceptions (e.g. ~INTEGER*2 is used to save space
and some routine names exceed 6 characters). These exceptions
are noted in the source code file headers.
Routines in ~RAMLIB and ~REFLIB tend to be very machine specific
and may require extensive modification for use on other machines.
Unless specificially stated, integers are all assumed to be the standard
default machine length. On the ~VAX this is INTEGER*4. A 2's complement
representation is assumed for negative integers when specifying the
line type bit pattern (various routines and programs) and in storing the
pen motion data in the routines SYMBOL, SYM3D, and SYM3DH.
.x INTEGER*4
.p
Some machine dependent constructs are used in the library for detection
of missing (and/or default) parameters (mainly in SYMBOL, NUMBER,
and AXIS ROUTINES). These can easily be modifed and/or adapted for
other machines.
.p
Note that when a subroutine is called with a Hollerith constant,
CALL SUB('string'),
~VAX ~FORTRAN passes the string as a ~BYTE array of ascii values. (see the
VAX FORTRAN User's Guide). ~CHARACTER variables are passed using a
different mechanism and can not be substituted.
If you wish to use a CHARACTER variable, use the %REF() function. i.e.,
use CALL SUB(%REF(CHARACTER_VARIABLE)).
.x %REF()
.x character
.x byte
.p
The ~VAX extended ~FORTRAN data type "BYTE" (for an 8 bit variable) is used
in the REF and Ramtek library package. The terminal output
is via a WRITE(*,<format statement number>) command.
The ~cursor routines CURMOTION, CURRECT, CURBAND use the machine dependent
routine ~INXTCHR to read escape sequences from the terminal.
Note, however, that the library can be used without these cursor routines.
.x %loc()
.P
A ~VAX routine %LOC() is used in ~MVAX5D and ~VAX5D to determine the
address of an array. These routines may be modified or deleted as desired.
.p
The library contains files for VAX environment help libraries, etc. These
files can be deleted if not used.
.hl1 Using Longlib with Graphics Terminals
.p
One of three internal, separate packages used by LONGLIB is the
terminal screen graphics package.
The LONGLIB graphics library supports a variety of graphics ~terminal
devices which use ~Tektronix graphics formats including:
.x Selanar
.x vt100
.x vt125
.x vt240
.s1
.ls0
.le;VT100 equipped with a Selanar GR100 or GR100+
(Selanar Corporation, Santa Clara, Ca.)
.le;VT125 (VT100 + retrographics)
.le;VT240 and compatibles
.le;VT220 equipped with a Selanar SG220
.le;Tektronix 4010/4014 and compatibles
.le;Tektronix 4107/4109 and compatibles
.le;Graphon GO-235
.els
.s1
.x PLOTVT
.x vtplot
.x newvpen
.x newvcol
Other graphics terminals can be used by appropriate modification of the
terminal driver routines (CTERM, VTPLOT, NEWVPEN, NEWVCOL). The routines
~FRAME and ~VPLOTS will also need to be modified.
Escape sequences need for terminal initialization and mode switching are
handled in the subroutine CTERM.
When plotting is not done to the terminal ~CTERM and other terminal
specific routines are
a dummy call. Note: plotting to the terminal is done by accumulating
a set of connected line segments created by ~PLOT or PLOTVT.
The line segments
are output to ~terminal only when the buffer length of 32 is exceeded or
a "pen up" occurs.
Consequently, a "pen up" should be issued to force all stored plot segments
to be output to the terminal prior to viewing screen.
.p
It is assumed that all terminals are configured in a standard fashion.
Because of the wide variety of terminal types, the specific settings
will not be given in this document.
.p
In designing the terminal driver routines, the design philosophy has been
to take advantage of the capability that many graphics terminals have to
display both text and graphics independently on the screen. That is,
the text and graphics "screens" can be independently cleared, etc.
This feature is heavily exploited in this library.
Of course not all terminals support this feature.
Terminals such as the VT240 and Tektronix 4010's do not support this feature.
In this case, the ~CTERM routine operates somewhat differently in that
it sets the terminal to graphics mode and leaves it there.
.p
Note that in the VAX environment, the SET TERM options of the terminal
driver must be properly configured. For example,
you must execute a SET TERM/FORM while in ~DCL to enable the screen clear
command to work properly. This permits a form feed to pass through to the
terminal. The NO ESCAPE qualifier should also be set to read from the
terminal.
.p
A command file, LONGLOC:CLEAR.COM,
has been provided which, when executed, will clear the screen of a VT100
equipped with a ~Selanar card and set the ~VT100 into text mode. A simliar
routine for a ~VT125 (TCLEAR.COM) and a VT220 (VCLEAR.COM) is also provided.
These reset the graphics mode back to terminal mode and clear the screens.
The are very helpful during program development.
.p
LONGLIB also supports color on graphics terminals which permit color
plotting.
.hl 2 Terminal Specific Application Notes
.p
The following sections describe the operation of the LONGLIB graphics
routines with some specific graphics terminal types. This list is
not comprehensive.
.hl 3 VT100 (w/Selanar Graphics Cards)
.p
A reference to a VT100 indicates a VT100 equipped with a Selanar
equipped (GR100, or GR100+) VT100.
A SG100 equipped VT100 has three modes: the terminal (VT100) mode, the Selanar
terminal mode, and the Selanar graphics mode. The routine ~CTERM is used
to switch the terminal between modes. A call to ~FRAME
will set the mode to the Selanar terminal mode. Whenever a line is
plotted to the screen the mode is change to Selanar graphics and then
back to the Selanar terminal mode. If a program error occurs when the terminal
is in the Selanar graphics mode, it is possible to not see
any output. Running the ~CLEAR command file will reset the mode back
to terminal. The Selanar card does not provide linetypes or XOR capability
in the 4010 operation mode.
.hl 3 VT125
.p
A ~VT100 upgraded with the DEC upgrage package to a VT125 has two
modes used by the LONGLIB library: the normal terminal mode, and the
Tektronix 4010 graphics mode. Both text and graphics can be displayed
on the same screen but independently manipulated by swithing between
modes.
Running the ~TCLEAR command file will reset the mode back to terminal.
.hl3 VT240
.p
Unlike other terminals, the ~VT240 when switched between terminal modes
clears the screen. Thus CTERM sets the terminal mode to the Tektronix
4010 mode when terminal graphics are initiated. The mode is not changed.
Limited linetypes are supported though XOR plot mode is not.
.hl 3 VT220 (w/Selanar Graphics Card)
.p
Reference to a ~VT220 terminal is intended to indicate a VT220 terminal
equipped with a Selanar SG220 graphics upgrade board.
The SG220 board operates through the VT220's printer port. In
addition, it uses some of the keys on the VT220 keyboard. It is possible
to enable the graphics board when the printer port is disabled. This causes
some of the keys (notably the keypad and cursor keys) to not work for editing,
etc. To correct this, deselect the graphics board using CNTRL-SELECT.
.p
In order for the graphics board to plot graphics commands from the library
routines, the printer port must be
in the controller mode and the board enabled. All this is automatically
handled by the LONGLIB graphics library routines. Note, however, that
you will need to use the CTERM commands correctly to obtain proper operation.
.p
The DCL command file ~VCLEAR will reset printer port, clear the graphics
card and terminal the screens under most situations.
.x getcursor
.p
When using GETCURSOR, a large cross-hair will appear on the screen.
Use the cursor keys and the shift key to move the intersection point to
the desired location and press a key. This ends the graphics input.
The cross-hair will disappear, there will be a pause, and the program
will continue. NOTE: DON'T USE THE RETURN KEY TO END GRAPHICS INPUT AS
THIS WILL CAUSE THE PROGRAM TO NOT READ THE LOCATION AND MESS UP YOUR
TYPE-AHEAD BUFFER.
.p
The SG220 board stores the starting and ending points of each vector in memory
then dynamically redraws the screen for each refresh (this is how it can do
zooming and windowing). However, this also limits the number of vectors
that can be drawn on the screen at once.
If a very large number of vectors are plotted, a zoom in/out may cause
a portion of them to not reappear.
.p
Note: Since the actual SG220 screen resolution is only 832x350
and the board is emulating a Tektronix 4014 (4096x3200) there is some
quantization error associated with the cross-hair operation.
.p
Note: When the manual zoom in/out feature is used
the cross-hair cursor does not work properly. The cross-hair is initially
plotted then erased. When you move the cross-hair, it is replotted.
A copy of the cross-hair stays at the start location. Otherwise, it is
useable.
.hl 3 Tektronix 4010/4014 Compatible Terminals
.x 4010
.x 4014
.p
A generic ~Tektronix 4010/4014 compatible terminal is defined in LONGLIB.
Linetypes are supported.
Since most ~Tektronix 4010/4014 compatible terminals do not support
dual text/graphics screens, this feature
is unavailable.
.hl 3 Tektronix 4107/4109 Compatible Terminals
.x 4107
.x 4109
.p
The ~Tektronix 4107/4109 terminals support a dual (text and graphics)
screen mode which is exploited by LONGLIB. Most of the advanced features
available on these terminals are not exploited. Color and linetypes
are supported. The command file ~TEKCLR (executed from DCL)
can be used to clear the screen
and reset the terminal into the ANSI mode.
.hl 3 Graphon Terminals
.p
The ~Graphon GO-235 is a terminal compatible with a VT100/VT200 and
Tektronix 4014. It permits both text and graphics on the same screen
in separate planes when properly configured. This configuration is
assumed by the LONGLIB graphics library. The Graphon terminal supports
linetypes, graphics input, and XOR plot mode.
A command file GCLEAR (executed
from DCL) is provided to clear the screen and reset the text mode.
.hl1 The LONGLIB Metafile (Hardcopy Output)
.p
The second internal package used by LONGLIB is the ~metafile or
printer history file package.
The library can optionally produce a plot metafile containing
scaled, clipped pen motion commands. This "history" file
can be processed by other programs to produce hardcopy output on the
appropriate device. Using the ~REPLOT program, the plot history file can
be redisplayed on a screen device. Raster scan converter programs produce
a dot-image printable file from the metafile for printing to a dot matrix
printer. Other metafile processing programs convert the LONGLIB metafile
to other graphics description languages including POSTSCRIPT, HPGL, QUIC, etc.
.x postscript
.x hpgl
.x quic
.x stripping
.x strips
.p
Many of the LONGLIB metafile processing programs permit "striping" of the
graphics image. When the graphics image contained in the LONGLIB metafile
exceeds the size of a single page (or whatever) of the output device, the
the metafile image is "cut" into "strips" which fit on the output page.
Then each page is output. Normally, blank pages are suppressed. At the
same time redundant pen motions, changes, etc. are filtered out.
.hl 2 Dot Matrix Printers
.x raster scan
.x dot matrix printers
.p
Dot matrix printers, in general, require graphics data in a bit-image
image format. This requires converting the LONGLIB metafile pen
motion file into a bit-image file using a raster scan process.
Using one of the supplied raster scan converter programs, the LONGLIB
metafile can be processed to produce a printable file of graphics for
several types of dot matrix printers. The raster scan converter programs
supports linetypes and widths. Currently, raster scan
converter programs which including "stripping" exist for the following
printers:
.s1
.ls0
.le;Printronix
.le;Trilog TIP-300
.le;DEC LA50 (or compatible)
.els
.p
The raster scan converter programs using "stripping" with a strip
size which depends on the printer. Ordinarily the strip is 56.5 by
13.2 inches (or the width of the printer page).
To generate a raster scan data file suitable for printing on a
dot matrix printer from the vector plot command file, the
raster scan converter program must be used. Versions of this
program exist for ~LA50 printers (LA50), ~Printronix printers
(PRNTRX), and ~Trilog Printers (TRILGLO or TRILGHI--see below).
.p
Two raster scan programs have been provided for the
~Trilog printer to take advantage of its higher printing resolution.
~TRILGLO prints the same resolution on the Trilog printer as on the
Printronix printer. ~TRILGHI plots at almost twice the across-the-page
resolution and the same down-the-page resolution. Execution time is longer
for the high resolution program.
.x raster scan conversion
.p
An example of the use of the TRILGLO program in the ~VAX environment
follows. The LONGLIB metafile input is FOR003.DAT. The output
is OUT.LIS.
.lit
$ TRILGLO :== $LONGLOC:TRILGLO
$ TRILGLO FOR003.dat ! run raster scan converter
$ print/que=Trilog OUT.LIS ! print output
.end lit
.p
~VAX ~DCL command files in the directory pointed to by the logical name
LONGLOC: contain command files for execution of these commands.
(PLOT183.COM = printronix printer, PLOTLO.COM = trilog printer lo-res
PLOTHI.COM = trilog printer hi-res).
.hl 3 Subprocesses
.p
Two subroutines have been provided to spawn a subprocess from
a FORTRAN program (in a ~VAX ~VMS environment) to execute the raster scan
converter programs.
.hl4 SUBROUTINE PSUBPRO
.lit
CALL PSUBPRO(i,opt,ip)
i (I): raster scan conversion program type
= 0 printronix printer
= 1 low res trilog printer
= 2 hi res trilog printer
opt (I): concurrent process option
= 0 wait for completion
= 1 no wait
ip (I): print flag
= 0 do not print
= 1 print
.end lit
~PSUBPRO creates a ~subprocess using ~SUBPROC to run the raster scan conversion
program. PSUBPRO should be used with FOR003.dat file after the plot package
has been closed. The output is OUT.LIS which can be printed if desired.
The command files used are located in LONGLOC:.
.hl 4 SUBROUTINE SUBPROC
.lit
CALL SUBPROC(in,out,i)
in (C) : input command file name (CHARACTER variable)
out (C) : output log file (CHARACTER variable)
i (I) : concurrent processing option
= 0 wait for completion
= 1 no wait
.end lit
.p
~SUBPROC creates a ~subprocess which executes the command file IN. The output
is places in the file OUT (if OUT is NL: the output is discarded).
.hl2 HPGL Compatible Pen Plotter
.x pen plotter
.p
Metafile conversion programs which convert the LONGLIB metafile into
an HPGL (~Hewlett-Packard graphics language) command data file
are included in LONGLIB. Three programs are available, HPGL, HPGL2,
and HPGLS.
.p
~HPGL reads the LONGLIB metafile, processes it into appropriate commands
and sends the commands to the terminal printer port (either a VT100 or VT220
compatible terminal or a VT100 equipped with a Selanar GR100 graphics board)
to which is connected
an HPGL-compatible pen plotter. No "stripping" of the image is done.
The user is prompted for page changes.
Pen changes on the plotter occur in response to a color change in the
metafile. Line types are supported but line widths are ignored.
.p
~HPGL2 reads the LONGLIB metafile and produces a separate output file of HPGL
commands for each page of LONGLIB metafile input. HPGL2 does not
include "stripping" of the image. HPGL2 plots all of the vectors of a
given color before changing
pens. Line types are supported but line widths are ignored.
.p
~HPGLS is similar to HPGL2 but includes stripping of the image.
HPGL2 produces a separate output file of HPGL commands for each strip
and page of LONGLIB metafile input.
.p
An example of the use of the HPGL2 program in the ~VAX environment
follows. The LONGLIB metafile input is FOR003.DAT. The output
is a file, OUT.LIS which can then be sent to an HPGL-compatible plotter.
.lit
$ HPGL2 :== $LONGLOC:HPGL2
$ HPGL2 FOR003.dat ! run HPGL conversion program
! several out.lis files may be produced
$ print/que=HPGL out.lis;* ! send output file(s) to plotter
.end lit
.hl2 QMS QUIC Laser Printer
.p
Three programs, LASER, LASERS, and RLASER, are included to convert the
LONGLIB metafile into a printable file in the ~QMS ~QUIC laser printer
control language.
Line width and line types are supported though color is not.
Programs LASERS and RLASER "strip" the metafile into 8.5 by 11 page strips
while LASER does not do stripping.
~LASER and ~LASERS produce
a full size, normal orientation output, while ~RLASER scales the output
by 3/4 and rotates the page -90 deg.
.p
An example of the use of the LASER program in the ~VAX environment
follows. The LONGLIB metafile input is FOR003.DAT. The output
is OUT.LIS.
.lit
$ QMS :== $LONGLOC:LASER
$ QMS FOR003.dat ! run QMS metafile conversion
$ print/que=QMSLASER OUT.LIS ! print output to printer
.end lit
.hl2 PostScript
.x applewriter
.p
A program titled ~POSTSCRIPT is included which will convert the LONGLIB
meta file into a PostScript page language format. This can then be printed
to PostScript compatible printer (such as an AppleWriter). No "strips"
are used. Linetypes and width are supported. Input color changes
are output as grey tones.
.p
An example of the use of the POSTSCRIPT program in the ~VAX environment
follows. The LONGLIB metafile input is FOR003.DAT. The output
is OUT.LIS.
.lit
$ POST :== $LONGLOC:POSTSCRIPT
$ POST FOR003.dat ! run POSTSCRIPT conversion
$ print/que=POSTSCRIPT OUT.LIS ! print output to printer
.end lit
.hl 2 Plotting the LONGLIB Metafile to a Screen Device
.p
A program ~REPLOT has been provided which will read the LONGLIB ~metafile
created by an eariler program and plot the file to a screen
device (terminal or Ramtek). This program may be run from DCL in the
VAX environment by:
.lit
$ REPLOT :== $LONGLOC:REPLOT
$ REPLOT <printer graphics file name>
.end lit
Note that the default meta file name is FOR003.DAT.
.hl1 Plotting on the RAMTEK Screen Graphics Device
.x ramtek emulation
.x ref
.p
The third internal package (which will not be available in some
installations) used by LONGLIB is the ~Ramtek Screen display package.
The plotting device is the Ramtek family of displays.
Currently, only some (but not all) of the
functions of the Ramtek 9460 (1280x1024) or 9050 (512x512)
Ramtek screen display are supported.
The Ramtek screen display can be replaced by the
Ramtek Emulation File (REF) package which simulates the Ramtek display
as an internal image array. The LONGLIB library can be configured without
the Ramtek package.
.x rplots
.x PLOTRM
.p
The Ramtek package is initialized by a call to ~FRAME (which calls RPLOTS).
When the Ramtek package is not being used, calls to Ramtek routines
are dummy calls. Note: plotting to the Ramtek is done by accumulating
a sequence of connected line segments (defined by ~PLOT or PLOTRM)
in a storage buffer. The line segments are output to the
~Ramtek only when the buffer length of 128 is exceeded or a "pen up" occurs.
Consequently, a final "pen up" should be issued to make all plot segments
are output to the display prior to viewing screen.
.p
The current version of the software drivers for the Ramtek display are
machine specific to VAX/VMS. The ~REF subpackage uses some ~VAX FORTRAN
specific constructs (for efficiency) but could easily be modified for
other machines.
.x vax/vms
.p
~Ramtek display drivers expects the logical name "RM" be assigned to Ramtek
device (example: assign RMA0: RM:).
When the Ramtek device supports multiple diplays, interaction between the
displays complicates matters. To distiguish between different displays on
the same device it is suggested that the 0th device be named xxx0:, second
device xxx1:, etc.
~Color plotting is done on the Ramtek using the previously loaded color table.
The LONGLIB "color" is the color table index.
The default Ramtek color table index is 255. The main LONGLIB package
uses only vector plotting. However, auxilary routines have been included
which permit writing image mode data to the Ramtek (or REF) and for
color table manipulation (see RMWRITEWORD or RMWRITECOL).
.x RMWRITEWORD
.x RMWRITECOL
.p
The Ramtek supports line types and scale factors but simulates line widths.
.hl2 Ramtek Emulation File Plotting
.x ramtek emulation file
.x REF
.p
When a Ramtek display is not available or
for off-line plotting to a "simulated" Ramtek device, a set of routines
known as the ~Ramtek Emulation File (REF) routines can be used.
These routines replace the Ramtek communications routines (RAMLIB) in
a version of the LONGLIB graphics library named LONGLIBR.OLB. This software
emulates many (but not all) of the important functions of the Ramtek
communication routines to a 9460 or 9050 Ramtek
display using an internal byte array.
.p
.hl 3 Using the REF Routines
.x RMWRITEWORD
.p
To use the REF routines, link to the LONGLIBR version of the LONGLIB library,
and plot to the Ramtek device.
The REF routines use a 1280x1024 BYTE array as the simulated Ramtek
display. Each byte of the array stores the color table index for each
pixel of the simulated Ramtek display. An empty "screen" consists
of all zeros. When a line is drawn to the
display using ~PLOT or ~PLOTRM the appropriate pixel bytes are set
to the line color. REF routines also permit image mode writing/reading
of horizontal or vertical lines of bytes (see RMWRITEWORD, for example).
When the plot package is closed (by a call to PLOTND) the user will be
prompted to output the internal BYTE array to a specific
device (a graphics terminal, a metafile, or a special REF file). To
avoid the interative prompt, the user can call ~REFDIS (with its appropriate
arguments) prior to the ~PLOTND call. This will disable the prompts.
See REFDIS for additional details.
.p
Note: the Ramtek color table routines and cursor routines are dummy calls
when using the REF routine library.
.hl3 REF File Output
.p
The REF file consists of a direct access file with a record length of
one horizontal line of pixels. The number of records and record size
depends on the type of Ramtek chosen (RECL=1280, 1024 records for the
large Ramtek and RECL=512, 512 records for the small Ramtek).
REFDIS places each horizontal line of the output array into each
record of the REF file.
The REF file can subsequently be read by the ~REFTERM program and
plotted to the "real" Ramtek device. To produce a hardcopy output
of the REF file on a ~QMS laser printer, the program ~REFLAS reads
the file and produces a simulated gray scale image with 4 grey levels.
REFLAS prompts the user for the appropriate inputs. In the ~VAX/VMS
environment, the program ~REFLAS2 can be used. REFLAS2 provides significantly
faster run times by using the VAX paging utility and downloadable fonts.
.hl3 REF Terminal or Metafile Output
.p
When outputing the byte array data to a terminal or printer history file,
the array is converted to a series of horizontal vectors. As the array
scanned left to right, top to bottom, all ajacent pixels of the same color
are combined into a single vector. When a pixel of a different color is
encountered the vector is output. Pixels of color "0" (background) are
not output.
See REFDIS for additional details.
.hl 1 Library Location
.p
All LONGLIB libraries, source files, and support programs are located in
the same directory. In the ~VAX environment,
The logical name ~LONGLOC: should be assigned to be this directory, i.e.,
.lit
$ assign disk:[directory] LONGLOC:
.end lit
.p
The LONGLIB object library is self contained. In order to link to the
normal library use the command (see also the shareable image library
section below),
.lit
$ link <your_prog>,LONGLOC:LONGLIB/LIB
.end lit
If your installation has a Ramtek display, this link command will include
the Ramtek display routines. If your installation does not have a Ramtek
display, this link command will include only dummy routines for Ramtek
routines. In order to link to the REF version the library (which is normally
available on every installation) use the LONGLIBR.OLB object library,
.lit
$ link <your_prog>,LONGLOC:LONGLIBR/LIB
.end lit
.hl 2 LONGLIB Source Code
.p
.x source code
.x FORTRAN
.X C
The source code for LONGLIB is all in FORTRAN and is included
in the distribution package.
Source code may be found in the following files:
.lit
LONGLIB.FOR (device dependent routines)
AUXLIB.FOR (auxilary device independent routines)
MLIB.FOR (MASTER routines)
MLIB2.FOR (more MASTER routines)
HIDELIB.FOR (3-d hidden line routines)
LONGLIB3D.FOR (3-d w/no hidden lines)
RAMLIB.FOR (Ramtek communication code)
MAPLIB.FOR (map routines)
CURSORLIB.FOR (cursor routines)
REFLIB.FOR (Ramtek emulation file routines)
etc.
.end lit
.p
In addition, the LONGLIB support program such as the example programs,
metafile processing programs, etc., are located in LONGLOC:.
.hl1 User Notes -- VAX/VMS Environment
.p
In the ~VAX/VMS environment LONGLIB provides an on-line help library
accessable from either a user program or DCL as well as a shareable
image library.
.hl2 Using the LONGLIB VAX/VMS On-line HELP Library
.x help library
.p
In the ~VAX/VMS environment an on-line ~help library is available in addition to this
documentation. The On-line help library can be accessed from ~VAX DCL by,
.lit
$ HELP @LONGLIB
or
$ HELP @LONGLOC:LONGLIB.HLB
.end lit
.x helpme
A subroutine for accessing the library is also included
in the LONGLIB package HELPME. From a user program calling HELPME with
a ~CHARACTER string corresponding to the initial help string will call
the VAX librarian for an interactive search through the LONGLIB help library.
.hl2 Using the LONGLIB VAX/VMS Shareable Image Library
.p
A shareable image library for the ~VAX/VMS may be created for the LONGLIB
graphics library. To obtain the most advantage from using the shareable
image library, the library must be "installed" by the system manager.
Not all installations will have an installed LONGLIB library.
Linking to the shareable image library
(LONGLIB.EXE rather than LONGLIB.OLB) produces executable files which
are small and run faster.
The main difference is in how they are linked. To link to the "normal"
library,
.lit
$ LINK your_file_name.OBJ,LONGLIB/LIB
.end lit
To link to the shareable image library you have to use a linker option
file:
.lit
$ LINK your_file_name.OPT/OPT
where your_file_name.OPT contains:
your_file_name.obj,LONGLIB/SHARE
or you may use the longlib linker option file:
$ LINK your_file_name,LONGLIB/OPT
.end lit
This second option for the linker option file is the easiest to use.
Note that the LONGLIB/OPT should be last on the link list. On most
installations, the REF version of the library, LONGLIBR, is not installed
as a shareable image library.
.p
Although the linking is somewhat more complex, the shareable image file
does allow program using the graphics library to run slightly faster and
the executeable to be significantly smaller.
.p
The shareable image library is designed to be upwardly compatible.
.hl1 Disclaimer
.p
LONGLIB is very powerful graphics package for line-graphics.
Unfortunately,
the desire to maintain compatibility with earilier LONGLIB versions
has resulted in less than optimal design decisions. There are, however,
some incompatibilities with earlier versions of LONGLIB; notably
the color array used in AXIS, AXIS2, and AXIS, the working space
specifications of PLT3D and NXTVU, and metafile internal format which
results in the fact that previous metafile processing programs will
not work with new metafiles and vice versa.
.p
LONGLIB was developed in the ~VAX ~VMS environment.
With the possible exception of the Ramtek package routines, every
attempt has been to keep LONGLIB FORTRAN-77 compatible and machine
independent with the exceptions previously noted. No claim is made
regarding the transportability of LONGLIB to non-VAX machines. It is
felt, however, that only small modifications would be required.
.p
As with any software system, there may be bugs in either the documentation
or software though every attempt to eliminate them has been made.
.CHAPTER Programming Examples
.p
In this chapter several ~examples of using some of the basic plotting
routines of this library are included. The ~VAX environment permits
the linking of object code segments compiled from different languages.
Thus, examples for both ~FORTRAN and ~C routines are shown.
.hl1 FORTRAN Programming Examples
.p
For the user interested in obtaining very simple plots of curves without
being concerned with the details of LONGLIB, the ~MASTER routines provide
the most simple approach. Greater control of the output plot can
be obtained by customizing user version of MASTER-like routines from
the auxilary routines.
.hl2 Simple MASTER Routine Example
.p
A very simple example of using the ~MASTER routines of this library is shown
below. For more detailed examples see the following sections.
.p
This example plots a
damped sine wave on both the terminal screen, the Ramtek (in color),
and the LONGLIB metafile.
The master routine ~PLOTSC handles all graphics intialization and
closing. (See the chapter on MASTER routines for additional details).
.TP 16
.lit
DIMENSION X(100),Y(100)
DATA P,U,PL,A,B,PHI/112,85,25.,.013,.3/
DATA PI/3.141593/
C FILL DATA ARRAYS
DO 10 I=1,100
X(I)=I-1
Y(I)=SIN((I-1)*PI/A+PHI)*EXP(-I*B)
10 CONTINUE
C CALL LONGLIB PLOTTING ROUTINE TO PLOT CURVE.
C OUTPUT ONLY 35 OF THE 100 POINTS ON A 6X5 PLOT WITH TITLE
C AND A GRID. iflag IS SET TO PROMPT FOR A SCREEN OUTPUT DEVICE.
C NOTE THAT WHEN A MASTER ROUTINE INITIALIZES LONGLIB, A
C METAFILE IS ALWAYS PRODUCED.
CALL PLOTSC(X,Y,100,5,6.,5.,'X TITLE',7,'Y TITLE',7,
1 'TOP TITLE',-10)
STOP
END
.end lit
.hl2 Lower Level Routines
.p
An example of using the auxilary routines of LONGLIB library from
~FORTRAN is illustrated below.
An example for using this library from ~C follows.
.p
This example plots a damped sine wave on both the terminal screen,
the Ramtek (in color), and the LONGLIB metafile. No MASTER
routines are used.
.lit
PROGRAM DEMO
DIMENSION X(100),Y(100),ICOL(3)
DATA P,U,A,B,PHI/112,85,25.,.013,.3/
C ICOL IS THE COLOR ARRAY FOR AXES
DATA PI/3.141593/,ICOL/1,2,3,4/
C FILL DATA ARRAYS WITH Y=F(X)
DO 10 I=1,100
X(I)=I-1
Y(I)=SIN((I-1)*PI/A+PHI)*EXP(-I*B)
10 CONTINUE
C INITIALIZE LONGLIB WITH SCREEN PROMPT OPTION
C AND CREATE METAFILE TO FORTRAN UNIT 3.
CALL FRAME(3,0,2.,2.,1.)
C COMPUTE SCALING FACTORS FOR X AND Y
CALL SCALE(X,8.,100,1,1,XMIN,DX)
CALL SCALE(Y,6.,100,1,1,YMIN,DY)
Y0=-YMIN/DY
C PLOT COORDINATE AXISES WITH COLOR OPTION ENABLED
CALL AXIS(0.,Y0,'X-AXIS',-6-100000,20.,0.,
1 XMIN,DX,N1,N2,ICOL)
CALL AXIS(0.,0.,'SINE',4+100000,17.,90.,
1 YMIN,DY,N1,N2,ICOL)
C SET LINE COLOR
CALL PLOT(5.,0.,0)
C PLOT DATA POINTS AS A LINE WITH SYMBOLS
CALL LINE(X,Y,100,1,5,2,1,1,XMIN,DX,YMIN,DY)
C PICK UP PEN AT END OF LINE (FORCES OUTPUT TO SCREENS)
CALL PLOT(0.,0.,3)
C PROMPT FOR SCREEN CLEAR ON RAMTEK/TERMINAL
CALL CTERM(2)
CALL RTERM(2)
C CLOSE LONGLIB
CALL PLOTND
STOP
END
.end lit
.hl 1 C Language Programming Example
.x c language
The following is an illustration of how to use lower level LONGLIB
routines to produce a plot from ~VAX C.
.tp15
.lit
/* Example in VAX C */
main
{
real x[100],y[100],dx,xmin,dy,ymin;
real exp(),sin(),y0;
int icol[4] = 1 , 2, 3, 4;
int i,n1,n2;
real pi = 3.141592654;
real p = 112., u = 85., a = 25., b = .013, phi = .3;
for (i = 1; i < 100 ; i++) {
x[i] = i - 1;
y[i] = sin( (i-1) * pi / a + phi) * exp(-i * b);
}
frame(&3,&-3,&0.,&0.,&1.); /* Initialize */
scale(x,&8.,&100,&1,&1,&xmin,&dx);
scale(y,&6.,&100,&1,&1,&ymin,&dy);
y0 = -ymin / dy;
plot(&2.,&2.,&-3); /* new origin */
axis(&0.,&y0,"X-AXIS",&-6-100000,&20.,&0.,&xmin,&dx,&n1,&n2,icol);
axis(&0.,&0.,"SINE",&4+100000,&17.,&90.&ymin,&dy,&n1,&n2,icol);
plot(&4.,&0.,&0); /* new color */
line(x,y,&100,&1,&5,&2,&1,&1,&xmin,&dx,&ymin,&dy);
plot(&0.,3&0.,&3) /* pen up */
cterm(&2); /* ask if screen clear */
plotnd; /* terminate plotting */
}
.end lit
.hl1 MASTER Routine Examples (FORTRAN)
.P
The subsections that follow illustrate additional examples of how to use
MASTER routines from FORTAN.
.hl2 Adding Additional Annotation to a MASTER Routine Plot
.X PLOTSC
.x plottests
.p
The following is an ~example of using a MASTER
subroutine more than once and/or adding additional text or
another plotting line and/or two MASTER subroutines: (see also the
program PLOTTESTS)
.TP16
.S1
.lit
...
C INCLUDE PLOTSC ROUTINE COMMON BLOCK WHICH RETURNS
C SCALE FACTORS USED IN PLOTTING
COMMON /CPLOTSC/XMR,DXR,YMR,DYR
...
C CALL PLOTSC WITH -10000 iflag < 0 TO INITIALIZE LONGLIB
C BEFORE CALL BUT NOT CLOSE LONGLIB AFTER CALL
C SET iflag TO PROMPT FOR SCREEN DEVICE TYPE WITH TICKED GRID
CALL PLOTSC(X,Y,25,4,8.,6.,'X AXIS',6,
1 'Y AXIS',6,'TITLE',-5,ICOL)
C PUT GRAPHICS TERMINAL IN GRAPHICS MODE
CALL CTERM(-1)
C PLOT ADDITIONAL TEXT AFTER PLOT TITLE
CALL SYMBOL(999.,999.,0.15,' TEXT',0.,5,-1)
C PLOT ADDITIONAL ANNOTATION ABOVE PLOT
CALL SYMBOL(0.0,6.5,0.15,'NUMBER=',0.,7,-1)
C ADD NUMBER AFTER ANNOTATION WITH 3 DIGITS AFTER DECIMAL PT.
CALL NUMBER(999.0,999.0,0.15,3.1415,0.,3,-1)
C CHANGE LINE TYPE TO DOTTED
CALL NEWPEN(1)
C ADD ANOTHER LINE OF DATA ON PLOT USING PLOTSC SCALE FACTORS
CALL LINE(X,Y2,N,1,0,0,1,1,XMR,DXR,YMR,DYR)
...
C ASK IF SCREEN CLEAR ON TERMINAL (METAFILE NOT AFFECTED)
CALL CTERM(2)
CALL PLOTND
...
.end lit
.hl2 Using Multiple MASTER Routines in the Same Program
.x plottests
.p
The following is an ~example of how to use several MASTER
subroutines in the same program. (see also the program PLOTTESTS)
The basic idea is to use the first call to a MASTER routine to
initialize the LONGLIB graphics library. On later calls to MASTER
routines you must use "iflag" to instruct the routine NOT to
re-initialize LONGLIB. The last call to a MASTER routine closes
LONGLIB.
.x PLOTLG
.x PLOTSC
.tp16
.S1
.lit
C FIRST CALL TO MASTER ROUTINE, SET -10000 < iflag < 0
C TO INITIALIZE LONGLIB BUT NOT CLOSE IT
C SET iflag TO PROMPT FOR SCREEN DEVICE TYPE WITH
C AXIS ON TOP AND SIDES AND NO GRID
CALL PLOTSC(X,Y,N,-1,...)
...
C SECOND CALL TO MASTER ROUTINE, SET iflag < -10000 TO
C PREVENT INITIALIZING LONGLIB OR CLOSING IT
C SET iflag TO PRODUCE AXIS TICKED GRID (SINCE
C LONGLIB OPEN, NO PROMPT FOR SCREEN DEVICE)
CALL PLOTSC(X,Y,N,-10004,...)
...
C LAST CALL TO MASTER ROUTINE, SET iflag > 10000 TO
C PREVENT INITIALIZING LONGLIB AND CLOSE IT AFTER PLOTTING
C SET iflag TO PRODUCE AXIS TICKED GRID AND LOG/LOG FORM
C (SINCE LONGLIB OPEN, NO PROMPT FOR SCREEN DEVICE)
CALL PLOTLG(X,Y,N,10053,...)
.end lit
.HL2 MASTER Routine Color Example
.x PLOTSC
.p
The following is a very elaborate example of how to use color in a particular
MASTER routine (PLOTSC).
.tp16
.s1
.lit
C DIMENSION AND LOAD COLOR ARRAY
DIMENSION ICOL(6)
DATA ICOL/1,2,3,4,5,6/
...
C CALL PLOTSC WITH NUMBER OF TITLE CHARACTERS NEGATIVE TO
C USE COLOR ARRAY. SET iflag TO INITIALIZE/CLOSE LONGLIB
C SET iflag TO PRODUCE AXIS TICKED GRID
CALL PLOTSC(X,Y,25,4,8.,6.,'X AXIS',6,
1 'Y AXIS',6,'TITLE',-5,ICOL)
...
.end lit
.PG
.HL2 Using Multiple MASTER Plots on Same Page/Screen
.x PLOTSC
.p
The following is a very elaborate example of how to to place several
MASTER routine plots on the same Ramtek and terminal screen but different
metafile pages.
.tp16
.s1
.lit
C OPEN LONGLIB OUTSIDE OF MASTER ROUTINE
C SELECT BOTH TERMINAL AND RAMTEK SCREEN OUTPUT WITH NO
C SCREEN CLEAR ON RAMTEK OR TERMINAL
CALL FRAME(3,-3,1.,1.,1.)
C CHANGE COLOR AND ADD A SEPARATE PLOT TITLE
CALL PLOT(7.,0.,0)
CALL SYMBOL(6.,11.5,.3,'TITLE',0.,5,-1)
C CHANGE ORIGIN AND SHRINK SUBSEQUENT PLOTS ON RAMTEK/TERMINAL
C BUT NOT METAFILE
CALL PLOT(1.,1.,-3)
CALL VFACTOR(.5)
CALL RFACTOR(.5)
C LOOP TO PLOT FOUR MASTER PLOTS ON ONE SCREEN
DO 10 I=1,4
C CALL PLOTSC WITH iflag < 10000 TO NOT INITIALIZE
C LONGLIB OR CLOSE IT AFTER PLOT
C SET iflag TO PRODUCE AXIS TICKED GRID
C (SINCE LONGLIB OPEN, NO PROMPT FOR SCREEN DEVICE)
CALL PLOTSC(X,Y,25,-10004,8.,6.,'X AXIS',6,
1 'Y AXIS',6,'TITLE',5)
C MOVE ONLY RAMTEK AND TERMINAL ORIGINS BUT NOT METAFILE
CALL PLOTRM(0.,2.*5.,-3)
CALL PLOTVT(0.,2.*5.,-3)
IF (I.EQ.2) CALL PLOTRM(11.,-20.,-3)
IF (I.EQ.2) CALL PLOTVT(11.,-20.,-3)
C NEWPAGE ON METAFILE (DOES NOT AFFECT TERMINAL/RAMTEK)
CALL NEWPAGE
10 CONTINUE
...
C PROMPT FOR SCREEN CLEAR ON RAMTEK/TERMINAL
CALL CTERM(2)
CALL RTERM(2)
C CLOSE LONGLIB
CALL PLOTND
...
.end lit
.CHAPTER Description of Plotting Routines
.p
This chapter details the central LONGLIB graphics library routines.
A brief description of each routine is shown along with an example
of its call and a description of the required parameters.
Optional parameters are shown in <> brackets.
.p
The name of each parameter is followed by a letter indicating
the variable type. Unless otherwise specified, integers are the
default integer length of the machine (which is ~INTEGER*4 on the VAX).
.x byte
.x integer
.x real
.x character
.x logical
.LIT
B = BYTE array string (see notes in section 1.2)
I = INTEGER
R = REAL
C = CHARACTER
L = LOGICAL
.end lit
NOTE: In ~VAX ~FORTRAN,
when a subroutine is called with a Hollerith constant such
as 'string', CALL SUB(... ,'string', ...),
VAX FORTRAN passes the string as a
BYTE array of ~ASCII values. A CHARACTER variable can not be substituted.
If you wish to use a CHARACTER variable, use %REF() to convert the
CHARACTER variable to a BYTE array, i.e.,
call SUB(..., %REF(CHARACTER_VARIABLE), ...).
.x %REF()
.p
Lengths are given in the standard plot units of inches. The routine
~FACTOR can be used to change the plot unit length. Angles are specified
in degrees counter-clockwise from the x axis.
.p
Unless specifically
noted all parameters passed into a routine via the call statement will
be used on a "read-only" basis, i.e., they will not be modified by the
routine.
.hl1 SUBROUTINE ABSPLT
.p
The routine ~ABSPLT changes the ABSOLUTE (versus relative as in PLOT)
rotation angle and scale factor of the metafile, terminal, and ~ramtek
plot routines to the values specified. Normally, the routine ~PLOT should be
used to change the origin, rotation angle, or scale factor. This routine
is provided for a skilled user to use in error recovery. Note, however,
that no error checking is provided in ABSPLT.
.lit
CALL ABSPLT (x,y,a,z)
x,y (R): coordinates of new absolute origin (in inches)
a (R): new absolute angle CCW from horizontal in degrees
z (R): new absolute scale factor
.end lit
.hl1 SUBROUTINE ARROW
.p
~ARROW plots a vector arrow at any desired point and with any desired
angle. The type of arrowhead drawn may be selected.
.lit
CALL ARROW (x,y,al,a,p,b)
x,y (R): location coordinates for vector-arrow tail
al (R): length of arrow in plot units
if al=0, only a single point at (x,y) is output
a (R): angle from horizontal at which the arrow is to be drawn
(deg counterclockwise)
p (R): length of arrowhead in plot units
> 0 open arrowhead ( --> )
= 0 no arrowhead
< 0 closed arrowhead ( -|> )
b (R): angle between arrowhead side and arrow line (deg)
.end lit
.hl 1 SUBROUTINE AXIS
.p
~AXIS plots a single coordinate axis with numeric labels at any desired
location and angle. The routine has to be
called separately for the x and y axis. A possible exponent
is determined and placed at the end of the axis title in the form
of 10**n. In order to leave room for the labelling the
axis should be removed at least by 3/4 inch from the edge of the plotter page.
The length of the axis should be integer-valued. The (i)th (i=0 to ml-1)
axis major tick is labeled with the value, xm+dx*i.
For a log axis see LGAXS.
.lit
CALL AXIS (x,y,s,n,al,a,xm,dx<,nm,ml<,ic>>)
x,y (R): location of starting point of the axis
s (B): alpha string containing the axis title
n (I): number of characters in the string s
> 0 : axis labelling on positive side (anti-clockwise)
< 0 : axis labelling on negative side (clockwise)
(100's digit) = 0 : coordinate line, ticks and labels drawn
= 1 : line and ticks only--no labeling
(1000's digit) = 0 : numeric labels paralel to axis line
= 1 : numeric labels orthogonal to axis line
(10000's digit) = 0 : additional optional parameters ignored
= 1 : additional optional parameters used
(100000's digit) = 0 : color list ignored
= 1 : color list used
al (R): length of axis in plot units (real number, integer-valued)
> 0 : tick marks placed on same side of axis as title
= 0 : no action (return with no plotting)
< 0 : tick marks placed on opposite side of axis from title
a (R): angle at which the coordinate axis is to be drawn
xm (R): value of first marking on the axis
dx (R): increment for numeric axis labels
(NOTE: the following optional parameters are needed only if
the magnitude of n is > 10000)
mn (I): minor tick marks between labeled major ticks
if not specified, 0 is used
ml (I): number of labeled major tick marks
if not specified, int(l) is used
ic (I): array of color values, if color not enabled,
current color is unchanged
ic(1) : color value for axis line and ticks
ic(2) : color value for numbers on axis
ic(3) : color value for axis label
(color upon return if no exponent plotted)
ic(4) : color for auto exponent scale
(color upon return if exponent shown)
.end lit
.hl1 SUBROUTINE AXIS2
.p
~AXIS2 is similar to AXIS but allows additional flexibility to draw
different tick sizes and types.
Optionally, a possible exponent
is determined and placed at the end of the axis title in the form
of 10**n. In order to leave room for the labelling the
axis should be removed at least by 3/4 inch from the edge of the plotter page.
The length of the axis should be integer-valued. The (i)th (i=0 to ml-1)
axis major tick is labeled with the value, xm+dx*i.
AXIS2 plots a coordinate axis and its markings at any desired location
and angle.
For a log axis see LGAXS.
.lit
CALL AXIS2 (x,y,s,n,al,a,xm,dx<,nm,nn,ml,ts,nd,sm<,ic>>)
x,y (R): location of starting point of the axis
s (B): alpha string containing the axis title
n (I): number of characters in the string
> 0 : axis labelling on positive side (anti-clockwise)
< 0 : axis labelling on negative side (clockwise)
(100's digit) = 0 : coordinate line, ticks and labels drawn
= 1 : line and ticks only--no labeling
(1000's digit) = 0 : numeric labels paralel to axis line
= 1 : numeric labels orthogonal to axis line
(10000's digit) = 0 : optional parameters ignored
= 1 : optional parameters used
(100000's digit) = 0 : color list ignored
= 1 : color list used
al (R): length of axis in plot units (real number, integer-valued)
> 0 : tick marks placed on same side of axis as title
= 0 : no action (return with no plotting)
< 0 : tick marks placed on opposite side of axis from title
a (R): angle at which the axis is to be drawn
xm (R): value of first marking on the axis
dx (R): increment for the axis markings
(NOTE: the following optional paramters are needed only if
the magnitude of n is > 10000)
nm (I): number of minor tick marks between major ticks,
if not specified, 0 is used
nn (I): nn-th minor tick is high-lited in length, if
not specified, 0 is used (none)
ml (I): number of labeled major tick marks, if not specified
then one major tick per inch is used
< 0 use following additional optional parameters used
> 0 use following additional parameters ignored
(NOTE: the following optional paramters are needed only if
the magnitude of n is > 10000 and ml < 0)
ts (R): character size of title and numbers, if not
specified, 0.15 is used
> 0 auto exponent scaling (x10 to power) is enabled
< 0 auto exponent scaling (x10 to power) disabled
nd (I): number of digits to right of decimal point, if not
specified 1 is used
sm (R): major tick length, if not specified 0.1 is used
note that minor tick length is 1/2 major tick length
ic (I): array of color indexes for axis colors
ic(1) : color value for axis line and ticks
ic(2) : color value for numbers on axis
ic(3) : color value for axis label
(color upon return if no exponent plotted)
ic(4) : color for auto exponent scale
(color upon return if exponent shown)
.end lit
.hl 1 SUBROUTINE AXIS3
.p
~AXIS3 plots a single axis and its markings at any desired location and
angle. Optionally, a possible exponent
is determined and placed at the end of the axis title in the form
of 10**n. The length of the axis can take any value. The (i)th (i=0 to ml-1)
axis major tick is labeled with the value, xm+i*(xx-xm)/le.
This version of axis is more flexible than other versions
and permits specifying the axis number labeling format.
For a log axis see LGAXS.
.lit
CALL AXIS3 (x,y,s,n,al,a,xm,xx,t,c,f,ic)
x,y (R): starting location of the axis
s (B): alpha string containing the axis title
n (I): number of characters in the string
> 0 : axis labelling on positive side (anti-clockwise)
< 0 : axis labelling on negative side (clockwise)
(100's digit) = 0 : coordinate line, ticks and labels drawn
= 1 : line and ticks only--no labeling
(1000's digit) = 0 : numeric labels paralel to axis line
= 1 : numeric labels orthogonal to axis line
(100000's digit) = 0 : color list ignored
= 1 : color list used
al (R): length of axis
> 0 : tick marks placed on same side of axis as title
= 0 : no action
< 0 : tick marks placed on opposite side of axis from title
a (R): angle at which the axis is to be drawn
xm (R): value of first marking on the axis
xx (R): value of last marking on the axis
t (R): number of tick marks
specification is coded in the form MMM.mmss where
MMM is the number of major tick marks ( MMM > 0), mm is
the number of minor tick marks between major tick marks
(100 > mm => 0), and ss is the number of subminor tick
marks between minor tick marks (100 > ss => 0).
(example 1.0102 produces I_._._i_._._I)
c (R): size of characters
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
f (R): axis number label format (see NUMBER)
Note: if an integer -1 is passed in place of f, AXIS3
will used f=1003.00 if autoscaling is enabled. If an
integer 0<n<13 is passed in place of f, AXIS3 will use
f=2+n*1.01 if autoscaling is enabled.
ic (I): array of color indexes for axis colors
ic(1) : color value for axis line and ticks
(color upon return if no labels)
ic(2) : color value for numbers on axis
ic(3) : color value for axis label
(color upon return if no exponent plotted)
ic(4) : color for auto exponent scale
(color upon return if exponent shown)
.end lit
.hl 1 SUBROUTINE CIRCLE
.p
~CIRCLE plots circles, arcs and spirals. The curve is approximated by small
straight lines. The radius of the curve determines the number of line
segments used. A solid circle of radius 2.0 centered at the origin could
be generated by the call,
.lit
CALL CIRCLE(0.0,0.0,0.0,360.0,2.0,2.0,0.0).
.end lit
while a spiral centered at (1,1) would be created by the call,
.lit
CALL CIRCLE(1.0,1.0,90.0,800.0,3.0,1.0,0.0).
.end lit
.lit
CALL CIRCLE (x,y,aa,ao,ra,ro,d)
x,y (R): coordinates for the center of the circle
aa (R): angle in degrees of starting point of curve
ao (R): angle of end point relative to start point
ra (R): curve radius at starting point
ro (R): curve radius at the end point
d (R): = 0 : solid curve
= .5 : dashed curve (software line type)
.end lit
.hl1 SUBROUTINE CSHADE
.p
The ~CSHADE subroutine fills in an ~area defined by a segment of a circle
using equally spaced lines at a given angle with a
specified line type. A full circle may be used.
.lit
CALL CSHADE (x,y,r,a1,a2,s,l,d,t,w,m1,m2)
x,y (R): location of circle center
r (R): segment or circle radius
a1,a2 (R): segment start and stop angles (a2>=a1)
if a2-a1=360 a full circle is used otherwise
the area is a pie segment
l (I): shade format control
= -3 : clear area and outline
= -2 : clear area
= -1 : clear outline
= 0 : no action
= 1 : draw outline
= 2 : shade area
= 3 : shade area and outline
d (R): distance between shading lines
t (R): angle of shading lines in degrees
w (R): working array dimensioned at least 3*n where
n=int((a2-a1)/(180*atan(s/r)/pi)+1)
m1 (R): line type of shading
< 0 : shading done with current line type
=> 0 : new line type (see NEWPEN)
m2 (R): line type for area outline
< 0 : use prior line type
=> 0 : new line type (see NEWPEN)
.end lit
.hl1 SUBROUTINE CTERM
.p
~CTERM is the central subroutine for controling the state of the graphics
terminal. It is used to switch a graphics terminal
in and out of the graphics and text modes. It is a dummy call when not in
~terminal plotting mode. Note that not all options are available on all
terminals. Results of operation of this routine is thus terminal dependent.
In some cases the graphics and text modes are the same while in others,
the mode is switched only at init/de-init.
See the introduction to the documentation under terminal types.
.p
Note: for CTERM(2), the user will be prompted for a "clear screen".
The reply may be "Y" for yes, "N" for no (the default), "Q" (quit),
"S" (skip one), "P" (pass many), or "D" (dump). "Y" and "N" clear
the screen as indicated and the program continues normally.
A reply of "Q" permanently disables terminal screen plotting until
the package is reinitialized by FRAME. A replot of "S" disables
screen plotting until the next CTERM(2) call whereupon the
"clear screen" prompt reappears as before. A reply of "P" is similar
to "S", but the user will be prompted for the number of ~CTERM(2) calls
to pass before reissuing the prompt. In this manner multiple terminal
screen "pages" can be skipped. A reply of "D" will enable a dump
of the screen to the attached terminal printer (if supported on the
particular terminal/printer). Note that during a skip that any changes
of origin by PLOT, scale factors by FACTOR or VFACTOR, or pen color
or linetype will NOT take place.
.lit
CALL CTERM (iarg)
iarg (I): terminal operation code
= 0 : initialize graphics mode on terminal
= 1 : return terminal from graphics to text mode
=-1 : return terminal text to graphics mode
= 2 : return terminal to text mode, and prompt
user for clear screen (see note above)
=-2 : return terminal to text mode, clear graphics screen
= 3 : clear text screen, leave in text mode
=-3 : clear graphics screen, leave in terminal mode
= 4 : dump graphics screen to printer
=-4 : clear text, graphics, leave in graphics mode
= 5 : turn off graphics screen, return to text mode
=-5 : turn on graphics screen, return to graphics mode
= 6 : toggle reverse video
= 8 : de-initialize graphics terminal
.end lit
.hl 1 SUBROUTINE DASHL
.p
.x software line type
.x line type
~DASHL plots a software-generated dashed ~line through the coordinate points
stored in x and y. See also LINE.
.lit
CALL DASHL (x,y,n,k,j,l,ix,iy,xm,dx,ym,dy)
Parameter list description same as LINE.
.end lit
.hl SUBROUTINE ELLIPSE
.p
~ELLIPSE will plot all or part of a parametric ellipse of the form,
.lit
(x,y) = (maj*cos(t), min*sin(t))
.end lit
where maj and min are the major and minor ellipse axes, respectively
and where t is the parametric angle specification. Part of the ellipse
can be plotted by specifying only part of the range of t.
The major axis center line is offset by the angle am.
The angles ast and aend define the starting and ending
angles for t. Note that aend should be greater than ast.
The ellipse is approximated by short, straight line segments. The number
and length of the segments depend on the size of the ellipse.
.lit
CALL ELLIPSE (x,y,maj,min,am,ast,aend)
x,y (R): center of ellipse (halfway between foci)
maj (R): length of semi-major axis (distance between center and
curve through one focus)
min (R): length of minor axis (distance between center and
curve perpendicular to semi-major axis)
am (R): angle of semi-major axis from horizontal
(deg counter-clockwise)
ast (R): start angle of curve from semi-major axis
(deg counter-clockwise)
aend (R): end angle of curve from semi-major axis
(deg counter-clockwise) note: aend > ast
.end lit
.hl SUBROUTINE FACTOR
.p
Positional information is usually expressed in inches. A conversion ~factor
can be given for other units, such as "cm". The new coordinate values are
derived from the product "fac*x" where x is the input value.
A negative value or zero resets the
scaling factor to unity. Note that the initial factor can be specified
in FRAME. The subroutine ~FACTOR calls PFACTOR, RFACTOR, and VFACTOR which
change the scale factors for the metafile, Ramtek, and terminal
packages, respectively. These routines can be called separately to
affect only the scale factor of the particular package.
.x FRAME
.x PFACTOR
.x RFACTOR
.x VFACTOR
.lit
CALL FACTOR (fac)
fac (R): new conversion factor for coordinate values (all packages)
<= 0 : scale factor reset to unity
> 0 : new scale factor
.end lit
.hl SUBROUTINE FRAME
.p
.x Selanar
.x vt100
.x vt125
.x vt240
.x vt220
.x Tektronix 4010/4014
.x Tektronix 4107/4109
~FRAME initializes the graphics metafile/terminal/Ramtek software and
resets internal variables. This routine is usually the first LONGLIB
routine called (also see ~PLOTS which calls FRAME). FRAME must be activated
before plotting calls are issued by the user program. FRAME should
normally be called only once in a program. MASTER routines optionally
handle the FRAME call.
.p
FRAME intializes the graphics output device packages. The FORTRAN
unit number used for the LONGLIB metafile can be specified. Normally,
unit 3 is used. If unit 0 is specified, FRAME will prompt the user
for a yes/no response to create a metafile. A negative unit number
disables the metafile package. All calls to metafile routines (such
as PPLOT) are dummy calls when the metafile package is disabled.
.p
FRAME also initializes the screen graphics device. A screen device
code is used to determine whether the Ramtek or Terminal screen device
packages are open. If a negative value for the screen device code
is used the screen device is not cleared prior to use, otherwise it is.
If the screen device code is +/- 4, no screen device package is used and
all calls to screen
specific routines (such as PLOTRM or PLOTVT) are dummy calls.
If a screen device code of 0 is used, the user is prompted for
a screen device to use. The screen devices may then be selected using
a character code.
A reply of "?" will list the available options.
.p
FRAME also intializes the origin and scale factor for plotting.
The default origin on the ~terminal and the ~Ramtek is the lower
left of screen (0.,0.). The
X axis runs horzontally, while the Y axis runs vertically. The
default origin on the printer is the upper left corner of page.
The X axis runs vertically down page, while the Y axis runs
horizontally across the page.
.p
When the ~Ramtek Screen device is selected, FRAME opens a
communications channel to the Ramtek.
If no channel is available or the Ramtek is in use an
error message is typed and the calling program is terminated.
.lit
CALL FRAME (pl,id,vpx,vpy,zom)
pl (I): Fortran file unit number (normally 3) used for LONGLIB
Metafile. If pl < 0 then no metafile is generated.
If pl = 0 then the user will be prompted for a yes/no
metafile. In this case unit number used will be 3.
id (I): Screen device code number.
< 0 : Do not clear Ramtek/terminal screens prior to use.
> 0 : Clear Ramtek/terminal screens prior to use.
= 0 : Prompts user for which screen device to use.
A ? response will list the available devices.
= 1 : Use VT100 as Screen Output (only) (Selanar GR100)
= 2 : Use Ramtek as Screen Output (only).
= 3 : Use both Ramtek and VT100 as Screen Output.
= 4 : Do not produce Screen output.
= 5 : Use VT125 as Screen Output (only)
= 6 : Use VT100 as Screen Output (only) (Selanar GR100)
= 8 : Use VT240 as Screen Output (only)
= 9 : Use VT220 as Screen Output (only) (Selanar SG220)
=10 : Use Tektronix 4010/4014 as Screen Output
=11 : Use Tektronix 4107/4109 as Screen Output
(color Tektronix)
=12 : Use Graph-On GO-235 as Screen Output
vpx, (R): relative x,y offset of the bottom left hand corner of
vpy the screen/page. Equivalent to PLOT(vpx,vpy,-3).
zom (R): The value of 'zom' scale factor. (see FACTOR)
.end lit
.hl 1 SUBROUTINE GRID
.x LGRID
.p
~GRID plots a ~Cartesian grid or solid lines or ticks at
grid intersections. See also LGRID.
.lit
CALL GRID (x,y,dx,dy,nx,ny)
x,y (R): coordinates in the bottom left corner of grid
dx,dy (R): spacing of grid lines in x and y directions
nx,ny (I): number of grids in x and y direction
if nx > 0 and ny > 0 then solid grid plotted
if nx < 0 or ny < 0 then tick grid plotted
if nx < 0 and ny < 0 then boxed tick grid plotted
.end lit
.hl1 SUBROUTINE HLT3D
.p
.x PLT3D
.x 2-d surface plotting
~HLT3D plots a 2 dimensional array to produce a 2-d histogram similar
to PLT3D. Hidden lines are supressed.
Transformation from the array indices (i,j) to (x,y,z) is:
.lit
x = xl * .5 * float(2*j-n-1)/float(n-1)
y = yl * .5 * float(2*i-m-1)/float(m-1)
z = zs * (a(i,j) + z0)
Thus,
(1,1) is (-xl/2,-yl/2) (m,1) is (-xl/2,+yl/2)
(1,n) is (+xl/2,-yl/2) (m,n) is (+xl/2,+yl/2)
xplotted = x*cos(az) - y*sin(az) + x0
yplotted = x*sin(az)*sin(al) + y*sin(az)*sin(al) + z*cos(al) + y0
.end lit
.p
The common block ~PLT3B returns these ~transformation parameters so
that the plotted location (xp,yp) of the corner of the cube corresponding
to the point (i,j,zr) may be computed as:
.lit
xp = a1 * j + a2 * i + a3
yp = b1 * j + b2 * i + b3 * zr + b4
.end lit
.p
The dimension of the working array is dependent on the
surface complexity -- the greater the surface complexity, the greater
l2 must be. As a minimum, l2 > 4*min(m,n). See also ~NXTVU and PLT3D.
.x PLT3D
.lit
CALL HLT3D (a,md,nd,m,n,w,l,w2,l2,al,az,xl,x0,yl,y0,zs,z0,ierr)
a (R): array of values to be plotted dimensioned a(md,nd)
md,nd (I): array dimensions
m,n (I): size of data in array to be plotted
w (R): dummy variable so that call is compatible with PLT3D
l (I): dummy variable so that call is compatible with PLT3D
w2 (R): working storage array dimensioned w2(l2)
l2 (I): working storage array dimension (see note)
al (R): viewing altitude angle (deg)
az (R): viewing azimuth angle (deg)
xl,yl (R): length of unprojected axes in plot units
x0,y0 (R): plot origin in plot units
zs (R): z coordinate scale factor
z0 (R): z coordinate offset
ierr (I): (returned) error code
= 0 : ok
= 1 : l2 not large enough in NXTVU
COMMON /PLT3B/ a1,a2,a3,b1,b2,b3,b4
.end lit
.hl 1 SUBROUTINE HELPME
.p
~HELPME calls the ~VAX ~VMS interactive ~help utility for the LONGLIB help
library with an initial help request string. The librarian is interactive
so that the user is prompted for additional input until a control-Z
is typed at which point control is returned to the calling program.
.lit
CALL HELPME(s)
s (C): initial help request string
.end lit
.hl 1 SUBROUTINE JPLTAG
.p
~JPLTAG plots the JPL logo (JPL). Optionally, it can produce only a line
outline or fill the outline with a line pattern using SHADE.
.lit
CALL JPLTAG (x,y,h,a,i,d,m,sa,w)
x,y (R): coordinates of the lower left corner of the initial j
h (R): letter height in plot units
a (R): angle of baseline relative to horizontal
i (I): option flag
(1's digit) = 0 no action
= 1 draw outline only
= 2 draw shading only
= 3 shade area and draw outline
(10's digit) = pen color (if = 0, pen color is not changed)
d (R): distance between shading lines
m (I): shading line type
=> 0 line type (see NEWPEN)
sa (R): angle of shading lines
w (R): working array dimensioned at least w(56+54*H)
.end lit
.hl 1 SUBROUTINE LGAXS
.p
~LGAXS plots a single ~logarithmic coordinate ~axis. Complete
decades are produced. See also ~AXIS and LGLIN.
.x LGLIN
.lit
CALL LGAXS (x,y,s,n,al,a,nmin,dx<,ic>)
x,y (R): location starting point of the axis
s (B): axis label string
n (I): number of characters in string
> 0 : label on positive side
< 0 : label on negative side
(100's digit) = 0 : coordinate line, ticks and labels drawn
= 1 : line and ticks only--no labeling
(1000's digit) = 0 : numeric labels paralel to axis line
= 1 : numeric labels orthogonal to axis line
(10000's digit) = 0 : color list ignored
= 1 : color list used
al (R): length of axis
> 0 : axis ticks placed on same side of axis as title
= 0 : no action (return with no plotting)
< 0 : ticks placed on opposite side of axis from title
a (R): angle at which the axis should be plotted
nmin (R): number to be printed at the first axis tick (power of ten)
dx (R): scaling factor in the form dx=(nmax-nmin)/l where
nmax, nmin are the exponent powers at the start
and end of the axis
ic (I): color array (required if mag(n)>10000))
ic(1) : color for axis line and ticks
ic(2) : color for numbers
ic(3) : color for axis title
.end lit
.hl 1 SUBROUTINE LGLIN
.x LINE
.p
~LGLIN plots a solid curve through a set of values from x to y.
Either x or y or both may in the process be converted to
~logarithmic form. Symbols may be used at selected intervals.
(see also ~SCALG and LINE). The plotted x values are computed according to,
.lit
for logarithmic scaling,
xplotted= (alog10(abs(x(i))+1.e-38)-xm)/dx
for linear scaling,
xplotted= (x(i)-xm)/dx
.end lit
and similarily for y.
.lit
CALL LGLIN (x,y,n,k,j,l,lg,ix,iy,xm,dx,ym,dy)
x (R): array containing the x coordinates
y (R): array containing the y coordinates
n (I): number of data points in x and y
(the number of data points in x,y must be equal)
k (I): take every first (k=1), second (k=2) value etc.
(normally k=1)
j (I): plotting symbol spacing flag
> 0 : symbol is plotted at every jth plotted point
connected by lines
= 0 : no symbols, lines only
< 0 : symbol is plotted at every abs(j)th plotted point
with no connecting lines
l (I): plot symbol number (see SYMBOL)
lg (I): log option
= - 2 : x and y are plotted using logarithmic scaling
= - 1 : x logarithmic, y linear
= 1 : x linear, y logarithmic
ix,iy (I): start index if arrays (normally ix,iy=1)
xm (R): minimum value scale factor for x array
dx (R): increment scale factors for x array
ym (R): minimum value scale factor for y array
dy (R): increment scale factors for y array
.end lit
.hl1 SUBROUTINE LGRID
.p
~LGRID plots a ~logarithmic or linear ~grid using solid lines,
dotted lines, or ticks. See also GRID.
.lit
CALL LGRID (x,y,dx,dy,nx,ny,i)
x,y (R): location coordinates for the bottom-left corner of grid
dx,dy (R): spacing of major grid lines in x and y directions
nx (I): number of major grid lines in x direction
< 0 : log spacing of minor lines
> 0 : no minor lines/ticks
ny (I): number of major grid lines in y direction
< 0 : log spacing of minor lines
> 0 : no minor lines/ticks
i (I): option flag
= 0 : solid major/minor lines
= 1 : dotted major/minor lines
= 2 : solid major lines with minor ticks
.end lit
.hl1 SUBROUTINE LINE
.p
~LINE plots a solid curve through a set of coordinate pairs
stored in two arrays. Symbols may be inserted at selected
intervals and points of curves may be skipped.
The coordinates are calculated as follows:
.lit
xplotted(i)=(x(i)-xm)/dx, i=ix to n, step k
yplotted(m)=(y(m)-ym)/dy, m=iy to n, step k
.end lit
The routine ~SCALE may be used to compute the scale factors xm, dx,
ym, and dy from the x and y arrays.
.lit
CALL LINE (x,y,n,k,j,l,ix,iy,xm,dx,ym,dy)
x (R): array containing the x coordinates
y (R): array containing the y coordinates
n (I): number of data points in x and y
(the number of data points in x, y should be equal)
k (I): plot every first (k=1), second (k=2) value etc
(normally k=1)
j (I): plotting symbol spacing flag
> 0 : symbol is plotted at every jth plotted point
connected by lines
= 0 : no symbols, lines only
< 0 : symbol is plotted at every abs(j)th plotted point
with no connecting lines
l (I): plot symbol number (see SYMBOL)
ix,iy (I): starting indexs in array (normally ix,iy=1)
xm (R): minimum value scale factor for x array
dx (R): increment scale factors for x array
ym (R): minimum value scale factor for y array
dy (R): increment scale factors for y array
.end lit
.hl1 SUBROUTINE LINSEQ
.x line type
.x software line type
.p
~LINSEQ plots line curves using software generated line types.
Cubic spline interpolation is used in the generation of the specified
long dash/short dash sequence. The cubic spline "smoothing" prior
to plotting may also be specified. Closed curves and loops are permitted.
A word of caution: due to the limitations of cubic splines, the
plotted curve may not exactly represent the underlying function.
The code used by this routine is an adaptation of the ~COSMIC routine
LAR-11123.
.p
LINSEQ can be used to plot the same curve at different locations
by first calling LINSEQ with the desired data, then calling LINSEQ
again with n set to zero and h changed.
.lit
CALL LINSEQ (x,y,z,n,ns,h,s,l1,l2,l3,l4,l5)
x (R): array containing the x coordinates
y (R): array containing the y coordinates
z (R): working array dimensioned at least z(3*n+3)
n (I): number of points in x,y arrays
if n=0 then arc parameters from the last
call to LINESEQ are used again
(used to replot the same curve at different location)
ns (I): number of smoothing passes (normally 0)
h (R): x axis plotting offset (normally 0). Setting h <> 0
and n=0 permits replotting last curve, shifted right
the specifed amount.
s (R): approximate interval between interpolated points on
curve. Actual interval is internally computed.
If s<0 pre-interpolation to 2*n-1 points is done.
l1-l5 (I): dash pattern control flags
l1 = Number of INTERVALS BETWEEN dashes
l2 = Number of LONG dashes per CYCLE
l3 = Number of INTERVALS per LONG dash
l4 = Number of SHORT dashes per CYCLE
l5 = Number of INTERVALS per SHORT dash
Note: if l1=0, l2-l5 are ignored and a solid curve is drawn
if l4=0, l5 is ignored. All dashes same length.
.end lit
.hl SUBROUTINE NEWPAGE
.p
.x form feed
.x page
~NEWPAGE inserts a change page command into the LONGLIB metafile. The
hardcopy conversion program use the change page command to issue a form
feed to the metafile output. Note that NEWPAGE only affects the metafile page
and does not change origin, etc.
It is a dummy call for ~Ramtek or ~terminal plotting. This command is
equivalent to CALL PLOT(0.,0.,10).
.lit
CALL NEWPAGE
(no arguments)
.end lit
.hl1 SUBROUTINE NEWPEN
.p
.x line type
.x ppen
.x rmpen
.x vpen
~NEWPEN calls PPEN, RMPEN, and VPEN which
change the hardware line type and/or width of the plotting
line for subsequent plotting on the metafile, Ramtek, and terminal
output devices.
The precise effects depend on the particular graphics device. There are
10 standard line types which are shown in the last chapter. The output device
will use the nearest hardware-supported line type to the standard line
type. Some
devices support additional types including permitting a specification
of the scale factor of the line type (the length of the dot/dash pattern).
If a device does not support line types, the default type is used.
Line widths are not support on the Ramtek packages and are simulated
in softwared for the terminal. The metafile package supports all features
although the metafile processing programs may only use the
features supported by the particular hardcopy graphics output device.
Default line type is a solid line of width 1 dot.
.lit
CALL NEWPEN (i)
i (I): selects a line type for all additional plotting
for all output devices
< 0 : resets line type to solid line of unit width.
= 0 : line type 0 no change in line width
> 0 : line type and width changed according to,
(1's digit) : line type (0-9)
(10's digit) : line width (1-7) (value of 0 does not change width)
(100's digit) : line type pattern scaling (1-7) (0 is no change)
.end lit
.hl1 SUBROUTINE NUMBER
.p
~NUMBER plots a floating point number in a specified format using
a fortran format-like specification. It also permits
free-format and exponential notation formats. The number is converted
to an ~ASCII string plotted at a specified location and baseline angle
using SYMBOL. The following table illustrates the dependence of the output
string on the type (integer/real) and value of the parameter e. The table
shows the output for an input f=103.356 and i=-1.
.tp 17
.lit
Output integer e real e
-------- ---------- --------
103 -1 1003.0
103. 0 0.0
103. 0 3.00
x103.36 7.02
103.36 2 0.02
103.356000 6 10.06
xx103 1005.0
** 1002.0 (format overflow)
x103.4 6.01
*.**** 6.04 (format overflow)
.103E+02 -8.03
*.*** -5.03 (format overflow)
note: x=space, * indicates overflow
.end lit
.lit
CALL NUMBER (x,y,h,f,a,e,i)
x,y (R): location position (x,y returned if i=-2 or -3)
If x=999 then x is continued from lower right of
prior call to SYMBOL or NUMBER. If y=999 then
y is continued.
h (R): size (height) of digits
f (R): floating point number to be plotted
a (R): baseline angle at which to plot
e (R): output format (e=n.j)
(similar to format statement Fn.j)
n is the total number of characters (max 18)
including the decimal point and j is a two digit number
specifying the number of digits to the right of
the decimal point (to get F6.4 use e=6.04)
if e < 0 number is plotted in exponential notation.
if e = 0 then number is output in free format
if n = 0 then number is output in free format
integer with no decimal point shown
The number will be shown as an m digit integer
if using e=1000+m.
NOTE for VAX usage: if an integer in the range (-1 to 12) is passed
for e, NUMBER detects and uses the integer value
to specify a free-format specifying
the number of digits to the right of the decimal point.
a -1 inhibits decimal point
i (I): centering flag (see SYMBOL)
= -3 : same as -2 but string is not plotted and
last position is not affected
= -2 : same as -1 but returns end point in x,y
= -1 : (x,y) is lower left corner of plotted array
= 0 : (x,y) is center of plotted array
= 1 : (x,y) is lower right corner of plotted array
= 2 : no action
.end lit
.hl SUBROUTINE PFACTOR
.p
~PFACTOR is called by ~FACTOR to change the input scale conversion factor
for the LONGLIB metafile package. It may be called separately if desired.
Only the metafile plotting package
is affected. The routines ~RFACTOR and ~VFACTOR may be separately
called to change the input scale conversion factor on the Ramtek and
terminal packages, respectively. See FACTOR.
.lit
CALL PFACTOR (fac)
fac (R): new conversion factor for coordinate values
(only the metafile scaling is affected)
<= 0 : scale factor reset to unity
> 0 : new scale factor
.end lit
.hl1 SUBROUTINE PLOT
.x view port
.x origin
.x plotting window
.x PLOTRM
.x PPLOT
.x PLOTVT
.p
~PLOT is the central routine for controlling the motion of the electronic
pen for all LONGLIB graphics device packages.
PLOT calls the Ramtek, metafile and terminal PLOT routines PLOTRM, PPLOT, PLOTVT
based on the graphics devices initialized by FRAME. These individual
"package PLOT" routines can be called separately if desired to affect
only the particular package. Via these package-specific plot routines
PLOT can moves the pen, change the origin or
pen color, issue a page change command, etc.
A relative rotation angle for all successive plotting may also be specified.
LONGLIB defines a
plotting ~window or viewport, the size of which is device dependent, within
which pen motions are clipped. The viewport may be set to an arbitrary
size within the device plotting window (e.g. terminal screen). An attempt to
make the viewport bigger than the device output will force the viewport
to be the device output window (this is the default).
.lit
CALL PLOT (x,y,i)
x,y (R): coordinate values
i (I): plot function parameter
= 0: color control
x is the new line color
if x < 0 the screen is cleared
if x >= 0 then plotting angle becomes y
= 2: draw to (x,y) with 'pen down'
= -2: same as i=2. (x,y) becomes new origin
= 3: move to (x,y) with 'pen up'
= -3: same as i=3. (x,y) becomes new origin
= 4: upper right corner of viewport set to (x,y)
= -4: lower left corner of viewport set to (x,y)
= 5: pick pen up at last point
= 9: erase to (x,y) (plot with color 0)
= -9: erase to (x,y) (x,y) becomes new origin
= 10: issue change page command to metafile
= 11: end plot (close LONGLIB)
=999: end plot (close LONGLIB)
.end lit
.hl1 SUBROUTINE PLOTND
.p
~PLOTND is used to signal LONGLIB that all plotting is complete. It
sends the final output buffers to the respective graphics devices, closes
files and channels, and resets the terminal to the normal ~text mode. PLOTND
is equivalent to a CALL PLOT(0.,0.,11) command.
.lit
CALL PLOTND
(no arguments)
.end lit
.hl1 SUBROUTINE PLOTS
.p
~PLOTS initializes the LONGLIB graphics package via a call to FRAME.
PLOTS provides compatibility with existing CALCOMP or PLOTS-10 compatible
code. It simply calls ~FRAME with argurments which cause FRAME to prompt
for optional usage of the Longlib meta file output and a graphics
screen. For new code use FRAME.
.lit
CALL PLOTS (...)
(arguments are ignored)
.end lit
.hl1 SUBROUTINE PLOTRM
.p
~PLOTRM is the central routine for controlling the plotting of lines to
the Ramtek or REF package. PLOTRM is called by the ~PLOT routine but
can be called separately. Any call to PLOTRM when the Ramtek package
is not initialized is a dummy call. Options for PLOTRM are similar
to PLOT (see documentation on PLOT).
An attempt to make the viewport bigger than the Ramtek screen window
will force the viewport to be the size of the Ramtek screen window
(this is the default). Typically the Ramtek screen window is
either 13.75 or 11 by 11 inches depending on the type (1280x1024 and
512x512, respectively), with the lower
left corner at (0,0) and the upper right corner at (13.75,11).
.lit
CALL PLOTRM (x,y,i)
x,y (R): coordinate values
i (I): plot function parameter
= 0: Ramtek color control
x is the Ramtek color table index
if x < 0 the Ramtek screen is cleared
if x >= 0 then rotation angle becomes y
= 2: Ramtek draw to (x,y) with 'pen down'
= -2: same as i=2. point (x,y) becomes new origin
= 3: Ramtek move to (x,y) with 'pen up'
= -3: same as i=3. Point (x,y) becomes new origin
= 4: upper right corner of viewport set to (x,y)
= -4: lower left corner of viewport set to (x,y)
= 5: pick pen up at last point
= 9: draw to (x,y) 'pen down' color 0 (erase)
= -9: same as i=9. Point (x,y) becomes new origin
= 11: end plot (close Ramtek package)
=999: end plot (close Ramtek package)
.end lit
.hl1 SUBROUTINE PLOTVT
.p
~PLOTVT is the central routine for controlling the plotting of lines to
the terminal screen device REF package. PLOTVT is called by the ~PLOT
routine but
can be called separately. Any call to PLOTVT when the terminal package
is not initialized is a dummy call. Options for PLOTVT are similar
to PLOT (see documentation on PLOT).
An attempt to make the viewport bigger than the terminal screen window
will force the viewport to be the size of the terminal screen window
(this is the default). Typically the terminal screen window is
9.5 by either 9.5 or 7.2 inches (depending on the terminal) with the lower
left corner at (0,0) and the upper right corner at (9.5,9.5).
.lit
CALL PLOTVT (x,y,i)
x,y (R): coordinate values
i (I): plot function parameter
= 0: if x < 0 the terminal graphics screen is cleared
if x >= 0 then rotation angle becomes y
if x = 0 set terminal to erase mode plotting
if x <> 0 and x <> 999 set line color to x
if x = 999 set terminal to XOR mode plotting
(only if terminal has capability)
= 2: draw to (x,y) with 'pen down' on terminal
= -2: same as i=2. Point (x,y) becomes new origin
= 3: move to (x,y) with 'pen up' on terminal
= -3: same as i=3. Point (x,y) becomes new origin
= 5: pick pen up at last point
= 4: upper right corner of viewport set to (x,y)
= -4: lower left corner of viewport set to (x,y)
= 9: erase to (x,y) on terminal (if supported)
= -9: same as i=9. Point (x,y) becomes new origin
= 11: end plot (close terminal package)
=999: end plot (close terminal package)
.end lit
.hl1 SUBROUTINE PLRAX
.p
.x polar axis
~PLRAX plots a circular ~axis for plotting in polar form. A series
of concentric circles are drawn around (x,y) at increasing radi
to the maximum radius. Provisions are included for half circle,
quarter circle, etc. Labeling of starting points and ending points
may be changed.
.lit
CALL PLRAX (x,y,r,as,ae,a0,a1)
x (R): x coordinate of center of polar axis
y (R): y coordinate of center of polar axis
r (R): radius of polar axis in plot units
as (R): starting angle of axis in degrees from horizontal
ae (R): ending angle of axis in degrees from horizontal
Note: as=0 and ae=360 yields full circle axis
a0 (R): number label of starting angle
a1 (R): number label of ending angle
Note: if a0=a1 then angles are not labeled.
.end lit
.hl1 SUBROUTINE PLRLN
.p
.x polar line
~PLRLN plots a solid curve through the set of coordinate points
in polar form stored in r and t arrays. Symbols may be inserted
at selected intervals. Angle values stored in the t array are
in degrees referenced to horizontal. Coordinates are calculated
as follows:
.lit
r=(r-rmin)/dr
xplotted=r*cos(t*pi/180)
yplotted=r*sin(t*pi/180)
.end lit
.lit
CALL PLRLN (r,t,n,j,l,ir,rmin,dr)
r (R): array of radial values to be plotted
t (R): array of angle values
n (I): number of points to plot
j (I): plotting symbol option flag
> 0 : symbol plotted every jth point with connecting lines
= 0 : line plotted only with no symbols
< 0 : symbols plotted only, no connecting line
l (I): symbol number (see SYMBOL)
ir (I): start index in r and t arrays
rmin (R): minimum radius scale factor
dr (R): scale factor
.end lit
.hl1 SUBROUTINE PLT3D
.p
.x 2-d surface plotting
~PLT3D plots a 2 dimensional array as a surface scribed with a
linear grid parallel to the x and y axes, i.e., a mesh.
Hidden lines are supressed.
Transformation from the array indices (i,j) to (x,y,z) is:
.lit
x = xl * .5 * float(2*j-n-1)/float(n-1)
y = yl * .5 * float(2*i-m-1)/float(m-1)
z = zs * (a(i,j) + z0)
Thus,
(1,1) is (-xl/2,-yl/2) (m,1) is (-xl/2,+yl/2)
(1,n) is (+xl/2,-yl/2) (m,n) is (+xl/2,+yl/2)
xplotted = x*cos(az) - y*sin(az) + x0
yplotted = x*sin(az)*sin(al) + y*sin(az)*sin(al) + z*cos(al)+y0
.end lit
.p
The common block ~PLT3B returns these ~transformation parameters so
that the plotted location (xp,yp) of a point (i,j,zr) may be computed as:
.lit
xp = a1 * j + a2 * i + a3
yp = b1 * j + b2 * i + b3 * zr + b4
.end lit
.p
The dimension of the second set of working arrays is dependent on the
surface complexity -- the greater the surface complexity, the greater
l2 must be. As a minimum, l2 > l. See also ~NXTVU and HLT3D.
.x HLT3D
.lit
CALL PLT3D (a,md,nd,m,n,w,l,w2,l2,al,az,xl,x0,yl,y0,zs,z0,ierr)
a (R): array of values to be plotted dimensioned a(md,nd)
md,nd (I): array dimensions
m,n (I): size of data in array to be plotted
w (R): working array dimensioned w(l) l=>4*min(m,n)
l (I): working array dimension
w2 (R): working storage array dimensioned w2(l2)
l2 (I): working storage array dimension (see note)
al (R): viewing altitude angle
az (R): viewing azimuth angle
xl,yl (R): length of unprojected axes (plot units)
x0,y0 (R): plot origin
zs (R): z coordinate scale factor
z0 (R): z coordinate offset
ierr (I): (returned) error code
= 0 : ok
= 1 : l2 not large enough in NXTVU
= 2 : l not large enough
COMMON /PLT3B/ a1,a2,a3,b1,b2,b3,b4
.end lit
.hl 1 SUBROUTINE PPLOT
.p
~PPLOT is the central routine for controlling the plotting of lines to
the LONGLIB metafile package. PPLOT is called by the ~PLOT
routine but
can be called separately. Any call to PPLOT when the metafile package
is not initialized is a dummy call. Options for PPLOT are similar
to PLOT (see documentation on PLOT).
An attempt to make the viewport bigger than the metafile plotting window
will force the viewport to be the size of the metafile plotting window
(this is the default).
The metafile plotting window is 56.5 by 56.5 inches with the lower
left corner at (0,0) and the upper right corner at (56.5,56.5).
Since most hardcopy devices can not produce such a large output page,
the LONGLIB metafile processor programs which convert the metafile to
an output file, "strips" the metafile window into separate, overlapping output
pages. Only non-blank page strips are output to the device.
.lit
CALL PPLOT (x,y,i)
x,y (R): coordinate values
i (I): plot function parameter
= 0: line color control
x is the new line color
if x >= 0 then plotting angle becomes y
= 2: draw to (x,y) with 'pen down'
= -2: same as i=2. (x,y) becomes new origin
= 3: move to (x,y) with 'pen up'
= -3: same as i=3. (x,y) becomes new origin
= 4: upper right corner of viewport set to (x,y)
= -4: lower left corner of viewport set to (x,y)
= 5: pick pen up at last point
= 9: erase to (x,y)
= -9: erase to (x,y), (x,y) becomes new origin
= 10: issue change page command to metafile
= 11: end plot (close metafile package)
=999: end plot (close metafile package)
.end lit
.hl1 SUBROUTINE PPEN
.p
.x line type
.x rmpen
.x vpen
~PPEN is called by ~NEWPEN to change the hardware line type and/or width of
the plotting line for subsequent plotting on the metafile. It may be
called separately to change only the metafile line type.
Ramtek and terminal output device line types may be changed using
RMPEN and VPEN, respectively. While the metafile output device supports
line types, widths and type scale factors (the length of the linetype
dot/dash pattern), the programs which process the LONGLIB metafile into
the output format required by the hardcopy device may not support all
features. The precise effects depend on the particular graphics device.
Raster scan converter programs for dot matrix printers support all options
and the 10 standard line types shown in the last chapter. On other
hardcopy devices, the metafile processing program uses the
the nearest hardware-supported line type to the standard line
type. Line widths are defined in terms of the minimum line widths.
The default line type is a solid line of width 1 dot.
.lit
CALL PPEN (i)
i (I): selects a line type for all additional plotting
to the LONGLIB metafile
< 0 : resets line type to solid line of unit width.
= 0 : line type 0 no change in line width
> 0 : line type and width changed according to,
(1's digit) : line type (0-9)
(10's digit) : line width (1-7) (value of 0 does not change width)
(100's digit) : line type pattern scaling (1-7) (0 is no change)
.end lit
.hl1 SUBROUTINE RECT
.p
~RECT plots a rectangle defined by the lower left and upper right hand
corners. The pen moves UP to lower left hand of the rectangle, plots
the rectangle, and leaves the pen DOWN at the lower left corner.
.lit
CALL RECT (x1,y1,x2,y2)
x1,y1 (R): lower left hand corner coordinates
x2,y2 (R): upper right hand corner coordinates
.end lit
.hl1 SUBROUTINE RESPL
.P
~RESPL performs a penup, then restores the current plotting origin, color,
line type, scale, and plotting angle saved by the ~SAVPL command. In conjunction
with ~SAVPL (which saves a previous condition) context changes can be easily
made. RESPL calls ~PRESPL (metafile restore), ~RRESPL
(Ramtek restore), and ~VRESPL (terminal restore)
which can be independently used if desired. If the stack is empty,
no restore occurs. (NOTE: graphics devices must be in the graphics
mode when this routine is executed). When using PRESPL, RRESPL, or VRESPL
a pen up operation should be executed imediately prior to the call.
.lit
CALL RESPL
(no arguments)
.end lit
.hl SUBROUTINE RFACTOR
.p
~RFACTOR is called by ~FACTOR to change the input scale conversion factor
for the LONGLIB metafile package. It can be called separately if desired.
Only the Ramtek plotting package
is affected. The routines ~PFACTOR and ~VFACTOR may be separately
called to change the input scale conversion factor on the metafile and
terminal packages, respectively. See FACTOR.
.lit
CALL RFACTOR (fac)
fac (R): new conversion factor for coordinate values
(only the Ramtek scaling is affected)
<= 0 : scale factor reset to unity
> 0 : new scale factor
.end lit
.hl1 SUBROUTINE RMPEN
.p
.x line type
.x ppen
.x vpen
~RMPEN is called by ~NEWPEN to change the hardware line type and/or width of
the plotting line for subsequent plotting on the Ramtek. It may be
called separately to change only the Ramtek line type.
Metafile and terminal output device line types may be changed using
PPEN and VPEN, respectively. While the Ramtek output device supports
line types and type scale factors (the length of the linetype
dot/dash pattern) it does not support line widths in hardware.
The default line type is a solid line of width 1 dot.
.lit
CALL RMPEN (i)
i (I): selects a line type for all additional plotting
to the LONGLIB Ramtek
< 0 : resets line type to solid line of unit width.
= 0 : line type 0 no change in line width
> 0 : line type and width changed according to,
(1's digit) : line type (0-9)
(10's digit) : line width (0-7) (ignored)
(100's digit) : line type pattern scaling (1-7) (0 is no change)
.end lit
.hl1 SUBROUTINE RTERM
.x REFDIS
.p
~RTERM is designed to be similar to the ~CTERM routine but for use with the
Ramtek. It is a dummy call when not in ~Ramtek plotting mode. When using
the ~REF package, it calls REFDIS.
.lit
CALL RTERM (iarg)
iarg (I): operation code
= 0 : clear Ramtek screen
= 2 : ask if clear screen desired.
reply should be: "Y" or "N". Default is "N".
NOTE: a reply of "Q" will execute RTERM(3).
a reply of "S" will close channel and stop
Ramtek plotting until next RTERM(2) (see CTERM)
=-2 : clear Ramtek screen
= 3 : close Ramtek plotting (closes old channel)
=-3 : reopen Ramtek plotting (opens new channel--does
not reinitalize Ramtek plotting package)
=-4 : clear Ramtek screen
.end lit
.hl1 SUBROUTINE SAVPL
.P
~SAVPL performs a penup, then stores the current plotting origin, color,
line type, scale, etc. on a stack which will store up six calls.
In conjunction
with ~RESPL (which restores previous condition) context changes can be easily
made. SAVPL calls ~PSAVPL (metafile save), ~RSAVPL
(Ramtek save), and ~VSAVPL (terminal save)
which can be independently used if desired. When the stack is
full no save is performed.
.lit
CALL SAVPL
.end lit
.hl1 SUBROUTINE SCALE
.x LINE
.p
~SCALE calculates the minimum and a scaled (smoothed) increment from
an array of values. The maximum and minimum of the array are computed
and the difference is divided by a length parameter. The resulting
values are "smoothed" so that numeric labels appear "nice" when labeled at
xm and at one inch increments.
The smoothed numbers are taken from the set of values 1,2,4,5,8 * 10n
that equals or is smaller than the true value. SCALE is useful
in determaning the scale factors for LINE. It is used extensively
in the MASTER routines. SCALE is not very intelligent and does not
always make good choices. SCALE selects xm and dx so that the plotted
x values may be computed using the following formula such that if
x=xm, xplotted=0 and if x=xlen*dx+xm, xplotted=xlen.
.lit
xplotted = ( x - xm ) / dx
.end lit
.lit
CALL SCALE (x,xlen,n,k,ix,xm,dx)
x (R): array of data points from which scale is determined
xlen (R): scale length
n (I): number of data points in x (n>1)
k (I): use every first (k=1) value, second (k=2) value, etc.
normally k=1.
ix (I): first data point index for x (normally ix=1)
xm (R): contains smoothed minimum after the call (returned)
dx (R): contains smoothed increment after call (returned)
.end lit
.hl1 SUBROUTINE SCALG
.x LGLIN
.p
~SCALG calculates a scaled minimum and increment factor similar
to ~SCALE but uses the log (actually alog10(abs(val)+1.e-38))
of the input array. See also SCALE and LGLIN.
SCALG selects xm and dx so that the plotted
x values may be computed using the following formula such that if
alog10(abs(x)+1.e-38)=xm then xplotted=0 and if
alog10(abs(x)+1.e-38)=xlen*dx+xm then xplotted=xlen.
.lit
xplotted = ( alog10(abs(x)+1.e-38) - xm ) / dx
.end lit
.lit
CALL SCALG (x,xlen,n,k,ix,xm,dx)
x (R): array of data points from which scale is determined
xlen (R): length
n (I): number of data points in x (n>1)
k (I): use every first (k=1) value, second (k=2) value, etc.
normally k=1
ix (I): first data point index for x (normally ix=1)
xm (R): contains smoothed minimum after the call (returned)
dx (R): contains smoothed increment after call (returned)
.end lit
.hl1 SUBROUTINE SHADE
.p
The ~SHADE subroutine fills in the ~area inclosed by the line defined
by the x and y arrays with equally spaced lines at a given angle using
a specified line type. The first and last
point of the x and y array are assumed to be connected.
.lit
CALL SHADE (x,y,n,i,l,d,t,w,ma,xm,dx,ym,dy)
x (R): array of x values
y (R): array of y values
n (I): number of points in array
i (I): increment between points
l (I): shade format control
= -3 : clear area and outline
= -2 : clear area
= -1 : clear outline
= 0 : no action
= 1 : draw outline
= 2 : shade area
= 3 : shade area and outline
d (R): distance between shading lines
t (R): angle of shading lines in degrees
w (R): working array dimensioned at least 3*n
ma (R): line type of shading
=> 0 : line type (see NEWPEN)
xm (R): minmum scale factor for x (see LINE)
dx (R): x increment scale factor
ym (R): minmum scale factor for y
dy (R): y increment scale factor
.end lit
.hl1 SUBROUTINE SYMBOL
.p
The ~SYMBOL routine plots an ~ASCII string. Upper and lower
case ~characters can be plotted as well as special plotting
symbols and characters. A list of symbols is shown in the last
chapter.
The plotting symbols 0 to 16 are centered vertically and horizontally,
while other symbols have a reference point on the lower left edge
of the character. Hence, i=-1 should be used for centered plot symbols
0 thru 16.
The number of characters in the input string which should be plotted
can be specified.
If an ASCII null (0) is encountered in the string beyond the
first position, the routine terminates.
.p
The string can be plotted left-justified, centered, or right-justified.
When the string is left-justified, the location of the end of the
plotted string can be optionally returned. The length of the
plotted string can be computed by calling SYMBOL first with i=-3
and computing the difference between the start and ending points of the
string.
.p
More elaborate characters and different fonts
may be obtained using SYMS. ~MASTER routines, ~AXIS routines, and ~NUMBER
all use ~SYMBOL characters. If the user desires to use ~SYMS in place
of SYMBOL throughout a program, the user can add the following routine
to the program. The subroutine should be titled SYMBOL with the
arguments described below. This routine
simply passes the arguments (in the same order) to SYMS.
.lit
SUBROUTINE SYMBOL(x,y,h,s,a,n,i) ! symbol replacement
INTEGER S(1)
A = SYMS(x,y,h,s,a,n,i) ! call syms
RETURN
END
.end lit
.x %REF()
.x descriptor
.p
Note: ~VAX ~FORTRAN ~CHARACTER types
can not be used directly since calling subroutines with CHARACTER types
is done by DESCRIPTOR. Use ~BYTE or ~INTEGER arrays for s or use %REF()
for character variables, i.e., call SYMBOL(0., 0., .25, %REF(S), 0., 10,-1).
See the section on machine dependency.
.lit
CALL SYMBOL (x,y,h,s,a,n,i)
x,y (R): location position (x,y returned if i=-2 or -3)
If x=999 then x continued from last position in
prior SYMBOL or NUMBER call. If y=999 then y continued.
h (R): height of the string to be printed
s (B): alpha string containing the text to be plotted
a (R): angle at which the string is to be plotted
n (I): number of characters in string s to plot
= -2 : draws pen down to (x,y) before symbol plotted
= -1 : plots a single symbol
> 0 : number of characters to plot
i (I): location flag
= -3 : same as -2 but string is not plotted and
last position is not affected
= -2 : same as -1 but returns end point in x,y
= -1 : (x,y) is lower left corner of plotted string
= 0 : (x,y) is center of plotted array
= 1 : (x,y) is lower right corner of plotted string
= 2 : no action
.end lit
.hl1 REAL FUNCTION SYMS
.p
.x character plots
~SYMS is similar to SYMBOL in that it will plot
an ~ASCII string (i.e. a byte array). However, SYMS provides additional
math and plotting symbols as well as several character fonts (including
~Greek characters). SYMS has several additional enhancements to permit
complicated equations to be plotted. All but the 9th font have variable
width characters. Several fonts are designed to produce solid characters
when the plotting scale is small.
The number of characters in the input string s plotted and/or
interpreted can be specified.
If an ASCII null (0) is encountered in the string after the
first position, the routine terminates.
.p
The ASCII character "|" (decimal 124) is used as a control character to
change fonts or subscripting options. The character following the
"|" character is used according to the following table:
.s3
.tp 30
.c;SYMS Options
.lit
ASCII Character Decimal Effect
________________ _________ ________
0-9 48-57 Change to font (0-9)
W 87 Move forward one space
X 88 Move forward 1/2 space
Y 89 Move backward one space
Z 90 Move backward 1/2 space
[ 91 Reset to default
\ 92 Begin subscripting
] 93 "Back up" one character
^ 94 Begin superscripting
_ 95 Un sub/super
` 96 Change scale (requires
another character-- "+"
indicates increase size by 2,
"-" indicates shrink by 1/2.
a 97 Begin over printing
b 98 Begin under printing
.end lit
The number of characters in the string should include control characters.
.p
The width of one space is moved when moving forward or backward.
"Back up" returns the positioning to the start of the last character.
Up to 6 "back up" commands can be issued. Super/sub scripting can be
done recursively. Only one level is "popped off" by the
un-sub/super command. Scale changes require an additional character
(either a "+" or "-" to indicate the direction). Over/under printing
permit summation and integral limits to be added. Available fonts are listed
in the following Table:
.tp 15
.s2
.x character fonts
.c;Fonts Available in SYMS
.lit
Font Characters Description
______ ____________ _____________
0 [default] ASCII 0-31 Plotting Symbols
ASCII 32-127 Simplex font--variable width
1 ASCII 32-127 Roman
2 ASCII 64-127 Greek Simplex
3 ASCII 32-127 Roman Italic
4 ASCII 32-127 Duplex bold
5 ASCII 64-127 Special math symbols
6 ASCII 32-127 Greek bold
7 ASCII 32-127 Simplex Italic
8 ASCII 32-127 Crude Simplex--fixed width
.end lit
.p
For example, the following summation using Greek characters, a
~math symbol, and a super scripted variable can be wrtten:
.TP7
.lit
alph string = 'A = |6R a|^2|_|]|]|]|]|b|1|2n=1|]|]|]|_|a|5K'
infinity 2
A = SIGMA alpha
zeta=1
.end lit
.p
Note: SYMS can be called as a real function. The returned value
is the final length of the plotted string. When i=2 no plotting
is done but the length is returned. When i=-2 the string is plotted
and the lower left corner of the next character position after
the end of the string is returned in x,y.
.p
Note: VAX FORTRAN CHARACTER types
can not be used directly since calling subroutines with CHARACTER types
is done by DESCRIPTOR. Use BYTE or INTEGER arrays for s or use %REF()
for character variables, i.e., call SYMS(0., 0., .25, %REF(S), 0., 10, -1).
See the section on machine dependency.
.lit
rlen = SYMS (x,y,h,s,a,n,i)
x,y (R): string position (x,y returned if i=-2 or i=-3)
If x=999 then x is continued from last position in
prior SYMS call. If y=999 then y continued.
h (R): height of the string to be printed
s (B): alpha array containing the text to be plotted
a (R): angle at which the string is to be plotted
n (I): number of characters in string s
i (I): centering flag
= -3 : same as -2 but string is not plotted and
last position is not affected
= -2 : same as -1 but returns end point in x,y
= -1 : (x,y) is lower left corner of plotted string
= 0 : (x,y) is center of plotted array
= 1 : (x,y) is lower right corner of plotted string
= 2 : no plotting, plotted length of string returned
rlen (R): (returned) length of plotted text string
.end lit
.hl1 REAL FUNCTION SYMSS
.p
.x character plots
~SYMSS is identical to SYMS except that it plots "smoothed" characters
using the software linetype generation routine LINSEQ.
Smoothing improves the appearance of most of the fonts
when the characters are plotted at large scale. See ~SYMS and ~LINSEQ for
additional details.
.lit
rlen = SYMSS (x,y,h,s,a,n,i,al,l1,l2,l3,l4,l5)
x,y (R): string position (x,y returned if i=-2 or i-3)
If x=999 then x continued from from last position in
prior SYMS call. If y=999 then y continued.
h (R): height of the string to be printed
s (B): alpha array containing the text to be plotted
a (R): angle at which the string is to be plotted
n (I): number of characters in string s
i (I): centering flag
= -3 : same as -2 but string is not plotted and
last position is not affected
= -2 : same as -1 but returns end point in x,y
= -1 : (x,y) is lower left corner of plotted array
= 0 : (x,y) is center of plotted array
= 1 : (x,y) is lower right corner of plotted array
= 2 : no plotting, plotted length of string returned
al (R): smoothed arc length (typically 0.05 to 0.01)
l1-5 (I): LINSEQ arc type, use l1=0 for a solid line.
rlen (R): (returned) length of plotted text string
.end lit
.hl SUBROUTINE VFACTOR
.p
~VFACTOR is called by ~FACTOR to change the input scale conversion factor
for the LONGLIB metafile package. It may be called separately if desired.
Only the terminal plotting package
is affected. The routines ~PFACTOR and ~RFACTOR may be separately
called to change the input scale conversion factor on the metafile and
Ramtek packages, respectively. See FACTOR.
.lit
CALL VFACTOR (fac)
fac (R): new conversion factor for coordinate values
(only the terminal scaling is affected)
<= 0 : reset scale factor to unity
> 0 : new scale factor
.end lit
.hl1 SUBROUTINE VPEN
.p
.x line type
.x rmpen
.x ppen
~VPEN is called by ~NEWPEN to change the hardware line type and/or width of
the plotting line for subsequent plotting on the terminal screen device.
It may be called separately to change only the terminal line type.
Metafile and Ramtek and terminal output device line types may be changed
separatly using PPEN and RMPEN, respectively. While the terminal output
device driver supports line types in hardware, line widths are supported in
software by outputing multiple single-width lines offset by one pixel.
Line type scale factors (the length of the linetype
dot/dash pattern) are not used. Not all terminals support all
standard line types. If a particular terminal does not support the
requested line type, normally a solid line is used.
The default line type is a solid line of width 1 dot.
.lit
CALL VPEN (i)
i (I): selects a line type for all additional plotting
to the terminal screen output device
< 0 : resets line type to solid line of unit width.
= 0 : line type 0 no change in line width
> 0 : line type and width changed according to,
(1's digit) : line type (0-9)
(10's digit) : line width (1-7) (0 value does not change width)
(100's digit) : line type pattern scaling (ignored)
.end lit
.hl1 SUBROUTINE WHERE
.p
~WHERE returns the location from the last call to PLOT.
The Zoom scale factor value is returned from the LONGLIB graphics device
packages in the priority order: ~terminal if open or ~Ramtek if open or
else from the metafile. Does nothing when no device is open.
.lit
CALL WHERE (x,y,z)
x,y (R): (returned) values of x,y from last call to plot
z (R): (returned) zoom value.
.end lit
.hl1 SUBROUTINE WHEREPR
.p
~WHEREPR returns information on the metafile plotting parameters. If lu <= 0
then metafile has not been initialized. A routine ~FIXPR0 (which
has the same parameters) may be used
to set these variables to absolute values without error checking.
.lit
CALL WHEREPR (x,y,ax,ay,z,a,rx,ry,lu,m,iw,ic)
x,y (R): (returned) current origin
ax,ay (R): (returned) last scaled and shifted origin point
z (R): (returned) current zoom scale factor
a (R): (returned) current plotting angle
rx,ry (R): (returned) resolution of metafile
lu (I): (returned) FORTRAN file output unit number
(if lu <= 0 metafile package not initialized)
m (I): (returned) current line type
iw (I): (returned) current line width
ic (I): (returned) current line color
.end lit
.hl1 SUBROUTINE WHERERM
.p
~WHERERM returns information on the ~Ramtek plotting parameters. If c <= 0
then ramtek has not been initialized. A routine ~FIXRM0 (with
same parameters) may be used
to set these variables to absolute values without error checking.
.lit
CALL WHERERM (x,y,z,a,rx,ry,nt,ns,i,ic)
x,y (R): (returned) current origin
z (R): (returned) current zoom scale factor
a (R): (returned) current plotting angle
rx,ry (R): (returned) current pixel resolution
nt (I): (returned) current line bit pixel pattern
ns (I): (returned) current line bit scale factor
i (I): (returned) Ramtek color
ic (I): (returned) Ramtek channel
(if ic <= 0 ramtek is not initialized)
.end lit
.hl1 SUBROUTINE WHEREVT
.x Selanar
.x vt100
.x vt125
.x vt240
.x vt220
.p
~WHEREVT returns information on the ~terminal plotting parameters. If nv <= 0
then terminal graphics have not been initialized. A routine
~FIXVT0 (with same arguments) may be used to set these variables to
~absolute values without error checking.
.lit
CALL WHEREVT (x,y,z,a,rx,ry,iv,ns,it,iw,ic)
x,y (R): (returned) current origin
z (R): (returned) current zoom scale factor
a (R): (returned) current plotting angle
rx,ry (R): (returned) current pixel resolution
iv (I): (returned) terminal code
(if nv <= 0 terminal is not initialized)
ms (I): (returned) internal terminal-type code
= 1 VT100 with Selanar GR100
= 2 VT125
= 3 VT240
= 4 VT220 with Selanar GR220
= 5 Tektronix 4010
= 6 Tektronix 4109
= 7 Graphon GO-235
it (I): (returned) current line type
iw (I): (returned) current line width
ic (I): (returned) current line color
.end lit
.CHAPTER Description of 3-d Plotting Routines
.x 3-d plotting
.p
The following paragraphs contain detailed descriptions of the subroutines
included in the LONGLIB library for 3-d plotting. For added flexibility,
two distinct families of 3-d plotting routines have been provided.
One family is designed for plotting with hidden line removal;
the other family is more flexible but does not perform hidden line removal.
Both options assume that ~FRAME has already been called, i.e. the plot
package is already opened. The 3-d routines call ~PLOT as output so
that the 2-d plot origin, scaling, rotation, etc. are used in addition
to any 3-d operations.
.p
The nominal Z axis of the 3-d plot packages for plotted objects runs out
of the screen. The X and Y axes are defined as before.
.p
.x hidden line removal
Two separate, independent 3-d packages exist. These are identified by
the initialization routines used for each package. The hidden line
removal package is ~INIT3DH and is a modification of the ~COSMIC hidden
line code package (ARC-11446). The other is INIT3D. ~INIT3D does
not perform any hidden line removal. These package differ not only in
hidden line removal but also in speed of operation and memory requirements.
The packages are completely independent. Only routines designed for a
particular package will work with that package. It is possible to
use both simultaneously.
.hl 1 INIT3D Routines
.p
The INIT3D 3d plotting package permits 3-d plotting but does not include
hidden line removal.
The family of routines used with ~INIT3D include:
.s1
.ls0
.le;PLOT3D -- the central plot routine for INIT3D
.le;AXIS3D -- plots axes using PLOT3D, NUM3D, and SYM3D
.le;NUM3D -- plots numbers using PLOT3D
.le;SYM3D -- plots symbols using PLOT3D
.le;WHERE3D -- returns the screen coordinates of the last point
drawn by PLOT3D.
.els
.p
The ~INIT3D family of 3-d plotting routines are desiged to plot
wireframe line plots with no hidden line removal. Memory requirements
are modest and plotting is more rapid than for the ~INIT3DH routines.
For an example of the use of the INIT3D package see the ~EXAMP3D
program included with the LONGLIB graphics library.
.hl2 SUBROUTINE INIT3D
.p
~INIT3D sets the ~absolute origin, rotations, and ~scale ~factor of
the 3-d package. These functions are distinct from the functions of
PLOT. INIT3D may be called at any time to reset these functions without
closing the plot package. The plot package must be opened with ~FRAME
prior to the call to INIT3D.
.lit
CALL INIT3D (x,y,z,xa,ya,za,t,ds,sf,i)
x,y,z (R): coordinates of view point (looking from)
xa,ya,za (R): coordinates of center point (looking to)
t (R): rotation angle around line from (x,y,z) to
(xa,ya,za) in degrees CCW.
ds (R): perspective scale factor (image size/viewing distance)
sf (R): relative scale factor
i (I): plotting flag ( -1 = do not plot, scaling only)
.end lit
.hl2 SUBROUTINE AXIS3D
.x AXIS3
.x PLOT3D
.x NUM3D
.x SYM3D
.p
~AXIS3D plots an axis and its markings in 3-d. In order to draw a
coordinate system, the routine has to be called separately for the x,
y, and z axis. A possible exponent is determined and placed behind the
axis label in the form of 10**n in the auto scaling mode (see AXIS3).
AXIS3D calls PLOT3D, NUM3D, and SYM3D. See also AXIS3.
.lit
CALL AXIS3D (x,y,x,a,b,g,s,n,ale,xm,xx,t,c,f)
x,y,z (R): location of start of axis
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the character string
g (R): angle of rotation about the ray defined by a,b (deg)
s (B): alpha string containing the axis title
n (I): number of characters in the string
> 0 : axis labelling on positive side (anti-clockwise)
< 0 : axis labelling on negative side (clockwise)
(100's digit) = 0 : axis is labeled
= 1 : line and ticks only--no labeling
ale (R): length of axis
< 0 : tick marks placed on same side of axis as title
= 0 : no action
< 0 : tick marks placed opposite side of axis from title
xm (R): value of first marking on the axis
xx (R): value of last marking on the axis
t (R): number of tick marks
specification is coded in the form MMM.mmss where
MMM is the number of major tick marks ( MMM > 0), mm is
the number of minor tick marks between major tick marks
(100 > mm => 0), and ss is the number of subminor tick
marks between minor tick marks (100 > ss => 0).
(example 1.0102 produces I_._._i_._._I)
c (R): size of characters
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
f (R): number label format (see NUMBER)
.end lit
.hl2 SUBROUTINE NUM3D
.x number
.x plot3d
.p
~NUM3D plots a floating point number (see NUMBER) in 3-d using
PLOT3D. The symbols are plotted in the plane defined by a,b,g.
.lit
CALL NUM3D (x,y,z,a,b,g,f,e)
x,y,z (R): lower-left corner of string
If x=999, y=999, z=999 then string is continued from
lower right of previous SYM3D or NUM3D call
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the base of the character string
g (R): angle of rotation about the ray defined by a,b (deg)
h (R): height of the number to be plotted
f (R): number to be plotted
e (R): format of number representation n.j
(see NUMBER for detailed description)
.end lit
.hl2 SUBROUTINE PLOT3D
.x CPLOT3D
.p
~PLOT3D is the 3-d version of PLOT. A relative ~rotation matrix and
~origin is maintained (separate from viewing matrix and PLOT parameters).
By setting the plotting option flag i in ~INIT3D to -1, plotting will be
inhibited. A common block, CPLOT3D, returns a 4 element vector V
with the screen transformed coordinates.
PLOT3D transforms the 3d input coordinates
to 2d coordinates, clips to a 3d clipping window, and calls ~PLOT with
the 2d coordinates screen coordinates of the visible line segments.
.x screen coordinates
.lit
CALL PLOT3D (x,y,z,i)
x,y,z (R): coordinates of point (in 3 space)
i (I): plot function parameter
= 0: color control
x is the line color
if x < 0 the screen is cleared
if x >= 0 2d plot angle (PLOT) becomes y
= -1: change relative scale factor by x
= 1: change relative rotation matrix
rotate x degrees CCW around x axis
rotate y degrees CCW around y axis
rotate z degrees CCW around z axis
= 2: draw to (x,y,z) with 'pen down'
= -2: same as i=2. (x,y,z) becomes new origin
= 3: move to (x,y,z) with 'pen up'
= -3: same as i=3. (x,y,z) becomes new origin
= 9: erase to (x,y,z) (erase is color 0)
= -9: same as i=9. (x,y,z) becomes new origin
common /CPLOT3D/V(4) : returned screen coordinates (x,y) of last
call to PLOT3D v(1)=x, v(2)=y
.end lit
.hl2 SUBROUTINE SYM3D
.x SYMBOL
.p
~SYM3D plots an ~ASCII string (see SYMBOL) in 3-d using
PLOT3D. The ~symbols are plotted in the plane defined by a,b,g.
.lit
CALL SYM3D (x,y,z,a,b,g,s,n)
x,y,z (R): lower-left corner of string
If x=999, y=999, z=999 then string is continued from
lower right of previous SYM3D or NUM3D call
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the base of the character string
g (R): angle of rotation about the ray defined by a,b (deg)
h (R): height of the string to be plotted
s (B): alpha array containing the text to be plotted (byte array)
n (I): number of characters in string s
.end lit
.hl2 SUBROUTINE WHERE3D
.p
~WHERE3D returns the 2d screen coordinates of the last line drawn using
PLOT3D.
.lit
CALL WHERE3D (x,y)
x,y (R): (returned) screen coordinates of last point
.end lit
.hl1 INIT3DH Routines
.p
The family of plotting routines included in the hidden line 3-d
packge INIT3DH include:
.s1
.ls0
.le;PLT3DH -- the central visible line plot routine for INIT3DH
.le;SKETCH -- the central hidden line plot routine for INIT3DH
.le;AXIS3DH -- plots axes using PLT3DH or SKETCH
.le;CUBE -- plots the polygons of the sides of a "cube"
.le;SYM3DH -- plots symbols using PLT3DH or SKETCH
.le;WHERE3H -- returns the screen coordinates of the last PLT3DH call
.le;XFRM3D -- transforms a point (x,y,z) into the perspective point
defined by INIT3D.
.els
.x hidden line removal
.p
The central hidden line plot routine SKETCH is an adaptation of the
~COSMIC routine ARC-11446 hidden line code. It has been modified
and extended for additional features. The INIT3DH can be used either
with or without the hidden line removal. However, the memory and
computational requirements for hidden line removal can be large for
complicated scenes. Essentially, planar polygons are defined and
entered into the SKETCH internal list. Upon the last call to
~SKETCH the visible lines are plotted using PLOT. Line segments can also be
entered into the SKETCH list prior to the last call. They will not
"hide" any other lines but can be hidden by planes. The SKETCH
routine can be set to plot both visible and invisible lines.
~PLT3DH does not use SKETCH. Lines plotted with PLT3DH will always
be visible. The auxilary routines (NUM3DH, AXIS3DH, and SYM3DH)
have options to either use ~SKETCH or PLT3DH.
.p
For an example of the use of the ~INIT3DH package see the ~EXAMP3DH
program included with the LONGLIB graphics library package
or see the ~MASTER routines TRIG3DH, HIST3D, or T3DH.
.x TRIG3DH
.x T3DH
.x HIST3D
.hl2 SUBROUTINE INIT3DH
.p
.x hidden line removal
~INIT3DH sets the relative ~origin and ~scale ~factor of the 3-d
package which includes hidden line removal. These functions are distinct
from the functions of PLOT or PLOT3D. INIT3DH may be called at any time
to reset these functions without closing the plot package. However, a
call to INIT3DH resets the internal SKETCH list of polygons. The plot
package must be opened with FRAME prior to a call INIT3DH. INIT3DH must
be called prior to SKETCH or PLT3DH. ~SKETCH uses an internal common
block for storage of its internal list. The user is required to provide
sufficient common block storage space. This common block is defined:
.lit
COMMON /GO/ ISIZE, WORK(ISIZE)
where
ISIZE >=(25 + 5*MNE + 4*(2+MNE+2*MNH))*NPOLYS
MNE = maximum number of edges per polygon
MNH = maximum number of edges per polygon
NPOLYS= maximum number of polygons
.end lit
If SKETCH is not used, this common block need not be dimensioned.
Note that ISIZE must be given a value in the user's code.
.p
The angles ya,ro,pi are defined as the sequence of rotations ya-ro-pi
(yaw, roll, and pitch)
where ya is the angle or rotation about the z axis (positive is
from x to y). ro is the angle of rotation about the x axis
(positive is from y to z). pi is the angle of roation about the y
axis (positive is from z to x).
.lit
CALL INIT3DH (x,y,z,ya,ro,pi,zom,ds,mne,mnh)
x,y,z (R): coordinates of relative origin
ya,ro,pi (R): yaw, roll, pitch angles (Eulerian) in degrees
(see above for angle definitions)
zom (R): relative scale factor
ds (R): viewing distance (9999. = infinity or no pespective)
mne,mnh (I): maximum number of edges and holes on one polygon
.end lit
.hl2 SUBROUTINE AXIS3DH
.x SKETCH
.x NUM3DH
.x SYM3DH
.x hidden line removal
.x AXIS3
.p
~AXIS3DH plots an axis and its markings in 3-d. In order to draw a
coordinate system, the routine has to be called separately for the x,
y, and z axis. A possible exponent is determined and placed behind the
axis labelling in the form of 10**n in the auto scaling mode. AXIS3DH
calls ~PLT3DH or SKETCH, NUM3DH, and SYM3DH. See AXIS3.
.lit
CALL AXIS3DH (x,y,x,a,b,g,s,n,ale,xm,xx,t,c,f,i)
x,y,z (R): location of start of axis
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the character string
g (R): angle of rotation about the ray defined by a,b (deg)
s (B): alpha string containing the axis title
n (I): number of characters in the string
> 0 : axis label on positive side (anti-clockwise)
< 0 : axis label on negative side (clockwise)
(100's digit) = 0 : labeled axis
= 1 : line and ticks only--no labeling
ale (R): length of axis
> 0 : tick marks placed same side of axis as title
= 0 : no action
< 0 : tick marks placed opposite side of axis from title
xm (R): value of first marking on the axis
xx (R): value of last marking on the axis
t (R): number of tick marks
specification is coded in the form MMM.mmss where
MMM is the number of major tick marks ( MMM > 0), mm is
the number of minor tick marks between major tick marks
(100 > mm => 0), and ss is the number of subminor tick
marks between minor tick marks (100 > ss => 0).
(example 1.0102 produces I_._._i_._._I)
c (R): size of characters
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
f (R): number label format (see NUMBER)
i (I): hidden line option flag
= 0 : use PLT3DH
= 1 : use SKETCH
.end lit
.hl2 SUBROUTINE CUBE
.p
~CUBE plots the 6 surface polygons of a 3-d "cube" into the
~INIT3DH 3-d plotting package. Either ~SKETCH or ~PLT3DH may be used.
.lit
CALL CUBE (x1,x2,y1,y2,z1,z2,i,h)
x1,y1,z1 (R): corner of cube
x2,y2,z2 (R): oposite corner of "cube" from corner 1
i (I): SKETCH flag for last SKETCH call in routine
Note: (returned) value is the SKETCH return
h (L): hide flag
= .TRUE. SKETCH routine used
= .FALSE. PLT3DH routine used
.end lit
.hl2 SUBROUTINE NUM3DH
.p
.x SKETCH
.x number
.x hidden line removal
~NUM3D plots a floating point number (see NUMBER) in 3-d using either
~PLT3DH or SKETCH. The symbols are plotted in the plane defined by a,b,g.
.lit
CALL NUM3DH (x,y,z,a,b,g,f,e,i)
x,y,z (R): lower-left corner of string
If x=999, y=999, z=999 then string is continued from
lower right of previous SYM3DH or NUM3DH call
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the base of the character string
g (R): angle of rotation about the ray defined by a,b (deg)
h (R): height of the number to be plotted
f (R): alpha array containing the text to be plotted (byte array)
e (R): format of number representation n.j
(see NUMBER)
i (I): hidden line option flag
= 0 : use PLT3DH
= 1 : use SKETCH
.end lit
.hl2 SUBROUTINE PLT3DH
.p
.x hidden line removal
~PLT3DH is a routine which operates in a similar as PLOT but in 3-d.
It is, however, independent of PLOT3D. A relative ~origin is
maintained (separate from the PLOT routine parameters) which is
initalized by INIT3DH. PLT3DH calls PLOT after transforming (x,y,z).
PLT3DH is also independent of the ~SKETCH routine. Lines plotted with
PLT3DH are always completely visible.
To use the hidden line removal SKETCH must be used.
.lit
CALL PLT3DH (x,y,z,i)
x,y,z (R): coordinates of point (in 3 space)
i (I): plot function parameter
= 0: line color control
x is the line color
if x < 0 screen is cleared
if x >= 0 plotting angle (in PLOT) becomes y
= 2: draw to (x,y,z) with 'pen down'
= -2: same as i=2. Point (x,y,z) becomes new origin
= 3: move to (x,y,z) with 'pen up'
= -3: same as i=3. Point (x,y,z) becomes new origin
= 9: erase to (x,y,z) (erase on Ramtek is color 0)
= -9: erase to (x,y,z) becomes new origin
.end lit
.hl2 SUBROUTINE SKETCH
.p
.x hidden line removal
~SKETCH is the central plot routine for hidden line removal 3-d plotting.
SKETCH is called for each ~polygon or line segment. Each polygon or
line segment is described by a set of points in (x,y,z) arrays.
For polygons,
these should be in either clockwise or counter-clockwise direction with
the last point equal to the first. Holes in polygons are created by
continuing the last outer edge point (which is also the first outer edge
point) to the inner hole edges and back. The option flag, i, should be 0
for all but the last polygon. When i=0, SKETCH stores the input polygons.
When i is set to be 1, the resulting scene visible lines are computed and
plotted by calls to PLOT. This process may take considerable cpu time
as well as memory storage space when the number of polygons is large.
The maximum number of edges of a polygon is 160.
.p
Note that SKETCH requires a large working area in a named ~COMMON area
described in INIT3DH. Note SKETCH will fail if the memory limits are
exceeded. For the most part an error flag will be set. Ocassionally,
the scene will be corrupted when the memory limits are exceeded without
the error flag being set.
.lit
CALL SKETCH (x,y,z,np,i)
x,y,z (R): arrays contain polygon edges (max 160)
np (I): number of points in x,y, and z
i (I): option flag. Should be 0 for all input polygons
except the last, when it should be 1.
(Note: if i+10 is used for i then the first z value
is used for all (x,y) points.)
i set to -1 (returned) if a memory error occurs
.end lit
.hl2 SUBROUTINE SYM3DH
.x SKETCH
.x SYMBOL
.x hidden line removal
.p
~SYM3DH plots an ASCII string (see SYMBOL) in 3-d using either ~PLT3DH
or SKETCH. The symbols are plotted in the plane defined by a,b,g.
.lit
CALL SYM3DH (x,y,z,a,b,g,s,n,i)
x,y,z (R): lower-left corner of string
If x=999, y=999, z=999 then string is continued from
lower right of previous SYM3DH or NUM3DH call
a,b (R): angles from the x-y, x-z planes (in deg) of the ray
from (x,y,z) along the base of the character string
g (R): angle of rotation about the ray defined by a,b (deg)
h (R): height of the string to be plotted in plot units
s (B): alpha array containing the text to be plotted
n (I): number of characters in string s
i (I): hidden line option flag
= 0 : use PLT3DH
= 1 : use SKETCH
.end lit
.hl2 SUBROUTINE WHERE3H
.x PLT3DH
.p
~WHERE3H returns the 2d screen coordinates of the last point in a call to
PLT3DH.
.lit
CALL WHERE3H (x,y)
x,y (R): screen coordinates of last point of call to PLT3DH
.end lit
.hl2 SUBROUTINE XFRM3D
.p
~XFRM3D uses the same scaling and origin as PLT3DH and SKETCH to
transform a 3-d points to screen (PLOT) coordinates.
.lit
CALL XFRM3D (x,y,z,x1,y1,z1)
x,y,z (R): input coordinates of point (in 3 space)
x1,y1,z1 (R): (returned) transformed coordinates of point (in 3 space)
.end lit
.CHAPTER Cursor Routines
.x INXTCHR
.p
The routines described in this chapter provide interactive cursor control.
When supported by the terminal, the Tektronix Graphics Inputs (GIN),
BITCURSOR or GETCURSOR, routines can be used. If the terminal has
a VT100-compatible text mode, the routines CURMOTION, CURRECT, and CURBAND,
can be used to simulate a GIN device. These routines use the VT100
keypad and cursor keys. They rely on a machine-dependent routine
(INXTCHR) to read escape characters from the terminal. CURMOTION,
CURRECT, and CURBAND return the internal screen "resolution" used
in computing the location of the cursor. This may not correspond to the
actual hardware resolution of the terminal screen.
.p
The routine CURLOCATE provides
a technique for placing a fixed "cursor mark" on the screen.
.p
A program CURTEST is provided to test and evaluate these cursor routines.
.hl1 SUBROUTINE BITCURSOR
.x cursor
.x graphics tablet
.x bit pad one
.x vt125
.p
~BITCURSOR moves a cross-hair cursor on a VT100 equipped with a retro-graphics
card (VT125) and a BIT PAD ONE graphics tablet. The VT125 is used in the
Tek 4010 mode with a graphics point returned when a key is pressed on the
bit pad puck (or stylus).
.lit
CALL BITCURSOR (x,y,k,rx,ry)
x,y (R): (returned) selected cursor position (in plot units)
k (I): (returned) key code
= 0 (Z) key pressed on bit pad puck
= 1 (1) key pressed on bit pad puck
= 2 (2) key pressed on bit pad puck
= 3 (3) key pressed on bit pad puck
rx (R): resolution of screen in x direction (returned)
ry (R): resolution of screen in y direction (returned)
.end lit
.x cursor
.hl1 SUBROUTINE CURLOCATE
.p
~CURLOCATE produces a simulated "x" cursor mark on the screen graphics
device (~Ramtek or ~terminal device)
When only the metafile is initialized a call to CURLOCATE is a dummy call.
The terminal takes precidence over the Ramtek when both are in use.
Erasure of cursor on requires the correct location where it was first plotted.
CURLOCATE uses the ~XOR capbility of graphics terminal to place and
remove the cursor. If the terminal has neither erase or XOR capability,
the graphics cursor can not be erased without clearing the entire screen.
If the (x,y) position is off the screen, the cursor will be located on
closest edge of the screen to the desired point.
.lit
CALL CURLOCATE (x,y,n,ir)
x,y (R): cursor position
n (I): cursor number/size (0-4)
< 0 erase cursor
> 0 locate cursor
ir (I): Ramtek cursor control (recognized if Ramtek is output)
= 0 Ramtek cursor device used
= 1 plotted Ramtek cursor mark used
.end lit
.hl1 SUBROUTINE CURMOTION
.p
~CURMOTION produces a graphics ~cursor on the ~Ramtek or ~terminal
When no screen devices are initialized a call to CURMOTION is a dummy call.
Terminal is used in preference to Ramtek.
This routine is supported only on terminals which can emulate the VT100
numeric keypad. The terminal text cursor and VT100 numeric keypad
keys are used to move the graphics cursor to a desired location and
a return function key is pressed to select the cursor location. Only
<space>, <return>, PF keys and the numeric key pad keys will be recognized
as return command keys. PF1 changes the cursor step movement size in three
sizes. As this happens the cursor changes sizes on the screen.
The cursor position is typed to the terminal when the Ramtek is used.
The cursor is moved in multiples of the pixel resolution. The
formula below shows the conversion. All other PF keys and the numeric
key pad keys will return the arguments shown below. Other keys are
not recognized. NOTE: The input buffer is 128 characters. If you exceed
this buffer the program may bomb. Each cursor key input uses 3 characters.
.lit
pixel number = (scalefactor * x + origin)/pixelresolution
.end lit
.lit
CALL CURMOTION (x,y,is,rx,ry)
x,y (R): (returned) selected cursor position
is (I): (returned) status flag
< 0 error
= 0 return key pressed
= 1 space key pressed
= 2,3,4 PF2,PF3,PF4 keys on VT100 pressed
= 10...19 VT100 numeric key pad keys 0...9 pressed
= 20 numeric key pad period key pressed
= 21 numeric key pad enter key pressed
= 22 numeric key pad comma key pressed
= 23 numeric key pad dash key pressed
rx (B): resolution of screen in x direction (returned)
ry (R): resolution of screen in y direction (returned)
.end lit
.hl1 SUBROUTINE CURBAND
.p
CURBAND is similar to the ~CURMOTION subroutine except that two
lines are "rubber banded" with the simulated cursor motion. This
routine is supported only on terminals which can emulate the VT100
numeric keypad. The line segment rubberbanding can be disabled if desired.
.lit
CALL CURBAND (x,y,is,rx,ry,x1,y2,x2,y2)
x,y (R): (returned) selected cursor position
is (I): (returned) status flag
< 0 error
= 0 return key pressed
= 1 space key pressed
= 2,3,4 PF2,PF3,PF4 keys on VT100 pressed
= 10...19 VT100 numeric key pad keys 0...9 pressed
= 20 numeric key pad period key pressed
= 21 numeric key pad enter key pressed
= 22 numeric key pad comma key pressed
= 23 numeric key pad dash key pressed
rx (R): resolution of screen in x direction (returned)
ry (R): resolution of screen in y direction (returned)
x1,y1 (R): starting point of rubber banded line 1
if x1=999, this line segment is not used
x2,y2 (R): starting point of rubber banded line 2
if x2=999, this line segment is not used
.end lit
.hl 1 SUBROUTINE CURRECT
.p
~CURRECT is similar to the ~CURBAND subroutine except that a
~rectangle is moved with cursor motion. This
routine is supported only on terminals which can emulate the VT100
numeric keypad.
.lit
CALL CURRECT (x,y,is,rx,ry,x1,y2,x2,y2)
x,y (R): (returned) selected cursor position/start position
is (I): (returned) status flag
< 0 error
= 0 return key pressed
= 1 space key pressed
= 2,3,4 PF2,PF3,PF4 keys on VT100 pressed
= 10...19 VT100 numeric key pad keys 0...9 pressed
= 20 numeric key pad period key pressed
= 21 numeric key pad enter key pressed
= 22 numeric key pad comma key pressed
= 23 numeric key pad dash key pressed
rx (R): resolution of screen in x direction (returned)
ry (R): resolution of screen in y direction (returned)
x1,y1 (R): lower left corner of rectangle
x2,y2 (R): upper right corner of rectangle
.end lit
.hl SUBROUTINE GETCURSOR
.p
~GETCURSOR inquires the ~Tektronix GIN device for the location
pointed to by the GIN device. Return code is screen device
dependent. This routine is does support all screen devices. When
a device is not supported, the routine returns without doing anything.
Screen device must be in the graphics mode.
GETCURSOR assumes that the ~GIN terminator is a CR (carriage return).
Note: When using an Alpha
key for the return status DO NOT use the <Return> key as this will prevent
the correct reading of the returned data.
.lit
CALL GETCURSOR (x,y,k,rx,ry)
x,y (R): (returned) cross-hair location (in LONGLIB coordinates)
k (I): (returned) GIN status code return (ascii code)
rx (R): resolution of screen in x direction (returned)
ry (R): resolution of screen in y direction (returned)
.end lit
.CHAPTER MAP SUBROUTINES
.x map routines
.x earth.dat
.x lndsea1.dat
.p
LONGLIB also supports the plotting of maps of the physical earth's surface
by providing map routines.
Two data files (EARTH.DAT and LNDSEA1.DAT) are included in the LONGLIB
graphics library package. EARTH.DAT contains the digitized locations of
the edges of the earth's landmasses. It forms the basis of a set of
EARTH OUTLINE map routines discussed below. LNDSEA1.DAT contains a bit map
of land/sea areas. It forms the basis of the LAND AREA map routines discusses
in the second section.
.p
Note: these routines assume that the plot package has already been opened.
.hl 1 EARTH OUTLINE MAPS
.p
To date only a small number of routines have been generated for using this data
file but more will be added in the future. Current routines allow for
plotting the ~earth outline map in 3d or in a linear projection.
.p
A data file (EARTH.DAT) which contains a ~map of the land/ocean interface
and a set of routines to access this data has been included in the LONGLIB
graphics library. The data file (of unknown origin) contains a list of
latitudes and longitudes of the land/ocean edges at about a 10 km resolution.
It is only a geographic map and does not contain political boundries.
Although imperfect, it is more than adequate for map drawing, etc.
Due to the high resolution, the EARTH.DAT file contains a lot of pen
motions, requiring a long plotting time.
.p
Fortran file unit 2 should be reserved for accessing the map data
file by these routines. The logical name ~LONGLOC: must be assigned
to be the location of the EARTH.DAT file.
.p
Routines using the land outline file include those for plotting on
3d spheres, flat surfaces, etc.
.hl 2 SUBROUTINE EARTH3D
.p
~EARTH3D permits 3d plotting of the earth land map. This routine
uses the ~INIT3D and ~PLOT3D 3d graphics package. It will plot the
entire earth map with the option of either a spherical earth or
an ellipsoidal earth. The radius may be specified. The transformation
from a latitude/longitude pair (a,b) in radians on the earth's suface to the
3d plotting vector v is:
.lit
rad = r * (1 - f*sin(a))
call sprect1(v,b,a-pi/2,rad)
call plot3d(v(1),v(2),v(3),2)
where
pi = 3.141592654
v is dimensioned v(3)
.end lit
.lit
CALL EARTH3D(r,f)
r (R): nominal earth radius (in plotting units)
f (R): earth flatness
= 0 for spherical earth
= 3.3528132e-3 for an ellipsoidal earth
.end lit
.hl 2 SUBROUTINE LANDMAP
.x projection
.p
~LANDMAP plots the earth land map using a linear projection. The latitude
and longitude are assumed to be a linear grid on a flat surface.
This routine will plot the entire map surface. Use
of the PLOT routine clipping option will permit plotting only limited
of the map surface if desired. The transformation of a latitude/longitude
pair (a,b) in degrees to an (x,y) pair for plotting is:
.lit
x = (b - s) * long / 360
y = (a + 90) * lat / 180
.end lit
.lit
CALL LANDMAP(alat,along,s)
alat,along (R): latitude, longitude scale factor (degrees/plot unit)
s (R): longitude of left-mode edge of map (-180 to +180)
.end lit
.hl 2 SUBROUTINE POLARMAP
.x projection
.p
~POLARMAP plots the earth land map using a polar projection. The latitude
is plotted as a linear radius. This routine will plot the entire northern
or southern hemisphere. The transformation from a visible point (in the
appropriate hemisphere) latitude/longitude pair (a,b) in degrees to a
plotted (x,y) pair is:
.lit
a = b * sgn(r) + a
x = cos( a * pi / 180) * r / 90 + x0
y = sin( a * pi / 180) * r / 90 + y0
where
pi = 3.141592654
.end lit
.lit
CALL POLARMAP(x0,y0,r,a)
x0,y0 (R): pole location (in plot units)
r (R): radius of equator (in plot units)
> northern hemisphere
< southern hemisphere
a (R): angle of prime meridian from horizontal (deg CCW)
.end lit
.hl 2 SUBROUTINE SPRECT1
.p
~SPRECT1 converts a ~spherical coordinate value (in a latitude/longitude
style spherical system) to ~rectangular coordinates.
The transformation from a latitude/longitude pair (a,b) in degrees to a
rectangular (x,y) pair is:
.lit
a = b * sgn(r) + a
x = cos( a * pi / 180) * r / 90 + x0
y = sin( a * pi / 180) * r / 90 + y0
where
pi = 3.141592654
.end lit
.lit
CALL SPRECT1(v,t,p,r)
v (R): output vector containing rectangular (z,y,z) coordinates
dimensioned v(3) (returned)
t (R): theta (longitude) angle (rad)
p (R): phi (latitude) angle (rad)
r (R): radius
.end lit
.HL1 Land Area Map Routines
.x LNDSEA
.p
The LNDSEA1.DAT file contains a bit ~map of the land/sea area of the earth.
Using the file, a specified point of latitude and longitude can be
determined to be land or sea.
A routine, LNDSEA, opens the file and provides a flag to indicate
if the specified point is land or sea.
.p
Fortran file unit 1 should be reserved for accessing the map data
file by these routines. The logical name ~LONGLOC: must be assigned
to be the directory containing the LNDSEA1.DAT file.
.hl 2 LNDSEA1.DAT Format
.p
The LNDSEA1.DAT is a direct access file is a world land/sea map
quantized to every 1/12 degree of
both latitude and longitude. An individual bit is used to indicate whether
a particular point is land or sea. The data is stored as 648 records
each of which contains all of the data for a 10 degree by 10 degree square.
Each record consists of 14400 (120*120) bits stored 30 bits per word
(4 words per each 1/12 degree strip of data).
The first word of the record indicates whether the entire 10 by 10 square
is all land or water using the following definition:
.lit
-1 : square contains both land and sea
0 : square contains all land
1 : square contains all water
.end lit
The next 4 words in each record are the bits for the bottom 1/12 degree
(lowest latitude) row of the 10 degree by 10 degree square with
longitude bins left to right. For each bit a 0 indicates land and a
1 indicates water. The records are ordered:
.lit
record # Latitude range Longitude range
_________ _______________ _________________
1 -90 to -80 0 to 10
2 -90 to -80 10 to 20
. . .
35 -90 to -80 340 to 350
36 -90 to -80 350 to 360
37 -80 to -70 0 to 10
38 -80 to -70 10 to 20
. . .
648 80 to 90 350 to 360
.end lit
.p
See the source code for ~LNDSEA function for additional information.
.hl 2 SUBROUTINE BITMAP
.x projection
.p
~BITMAP plots a land area by testing each point of the area using LNDSEA.
The plotting area is segmented into (nx X ny) regions. Each point is tested
for the presence of land/sea. For each resolutoin line of latitude,
a horizontal line is drawn through all points that are land (or sea as desired).
A linear projection is used. The latitude
and longitude are assumed to be a linear grid on a flat surface.
This routine will plot the entire map surface. Use
of the PLOT routine clipping option will permit plotting only limited
of the map surface if desired. The transformation of a latitude/longitude
pair (a,b) in degrees to an (x,y) pair for plotting is:
.lit
x = (b - s) * along / 360
y = (a + 90) * alat / 180
.end lit
.lit
CALL BITMAP(alat,along,s,nx,ny,i)
alat,along (R): latitude, longitude axis length (plot units)
s (R): longitude of left-mode edge of map (-180 to +180)
nx,ny (I): x,y resolution specified as the number of lat/longs
to test for land/sea
i (I): plot flag
= 0 plot land area
= 1 plot sea area
.end lit
.hl 2 INTEGER FUNCTION LNDSEA
.x projection
.p
~LNDSEA tests the point (lat, long) for land/sea using the LNDSEA1.DAT file.
It returns a 0 for land, 1 for sea. Uses Fortran file unit 1.
.lit
iflag = LNDSEA(alat,along)
alat (R): latitude (-90. to +90. degrees)
along (R): longitude (0. to +360. degrees)
iflag (I): land/sea flag (returned)
= -1 : error
= 0 : land
= 1 : sea (ocean, lake, sea)
.end lit
.chapter MASTER Subroutines
.p
By popular request, a set of the most commonly used general-purpose
subroutines for complete function plots, charts, etc.,
were included in the LONGLIB graphics library.
These subroutines are called "MASTER" Subroutines.
Each of these subroutines is self contained. When called, it
will initialize the plotting package, plot the required data,
and close the plotting package. Normally,
only one ~MASTER subroutine is called in a program.
However, options are available for
multiple calls to MASTER subroutines.
When the LONGLIB is initialized by a MASTER subroutine (which calls FRAME)
a metafile using Fortran file unit 3 is always created.
.p
Programming examples using MASTER routines are given in the chapter
on programming examples.
.p
To call a MASTER subroutine more than once in
a program the option flag must be set negative for all calls
but the last one which should be positive. (See also the PLOTTESTS program.)
To use more than one MASTER subroutine in a program:
.ls.dle'(',,')'
.le; On first MASTER subroutine call
set the option flag negative--this does not close plot package.
.le; on all additional calls to
MASTER subroutines set the option negative and greater than 10000--this
prevents re-opening plot package and does not close it.
.le; On the last call to a MASTER subroutine set option flag positive
but greater than zero--this closes plot package.
.els
.p
In summary, when LONGLIB is already open set the magnitude of the option flag
to greater than 10000. To prevent closing the plot package set option
flag negative.
When the plot package is closed in a MASTER subroutine CTERM(-2) is used
to ask if a termina lscreen clear (terminal plotting only) should be done.
MASTER subroutines always return the terminal to the text mode after call.
When color options are enabled, the color marked "(return)" is
the color in current use after call.
.p
Note: when passing varables ~ASCII strings do not use ~VAX ~FORTRAN
~CHARACTER data type. Use ~BYTE data type arrays or use %REF(). See
the comments under the section on machine dependency and the introduction
to the plot routine section.
.x common block
.p
Most MASTER subroutines have
~common blocks with the same name prefixed with the letter
"C" which contain the scaling information used to plot
the data line. This can be useful for plotting additional annotations,
etc.
.p
The following pages document the currently defined MASTER Subroutines.
Additional subroutines may be added as suggested by the users.
.hl1 MASTER Routine Index
.p
The sections that follow detail each MASTER routine. A brief index
of the capabilities of each Master routine is given below. To select
a MASTER routine, determine the category of plotting needed and
look at the available MASTER routine capabilities. For general purpose
line plotting where flexibility in specifying the axes,
the routine GLPLOT is recommended.
.tp4
.hl 2 Pie Chart
.ls0
.le; PICHRT
.els
.tp4
.hl 2 Bar Chart
.ls0
.le; BARCHR (can fill area between lines)
.els
.tp4
.hl 2 Single linear/linear line
.ls0
.le; PLOTSC (simple)
.le; GLPLOT (flexible axis specification)
.le; PLOTLGXL (allows log lines, software line types)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Two linear/linear lines on the same plot
.ls0
.le; PLOTSC2 (simple)
.le; GLPLOT (flexible axis specification)
.le; PLOTLG2 (allows log lines)
.le; PLOTLGX (allows log lines, flexible axis specification)
.le; PLOTLGXL (allows log lines, software line types)
.le; BARCHR (can fill area between lines)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Multiple linear/linear lines on the same plot
.ls0
.le; GLPLOT (more complex but flexible axis specification)
.le; PLOTLGX (allows log lines, flexible axis specification)
.le; PLOTLGXL (software line types)
.le; SEISPL (special options)
.le; SPLOTS (can show error bars)
.le; SPLOTSX (can show error bars with flexible axis)
.le; BARCHR (can fill area between lines)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Multiple log/linear or log/log lines on the same plot
.ls0
.le; PLOTLG (relatively simple)
.le; PLOTLGX (more complex, flexible axis specification)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Scatter plot
.ls0
.le; SCATPL
.le; SPLOTS (can show error bars)
.le; SPLOTSX (can show error bars with flexible axis)
.le; SEISPL (special options)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 1-d Histogram
.ls0
.le; PHIST (can show mean/standard deviation)
.le; BARCHR (bar chart)
.els
.tp4
.hl2 Lines/points with error bars
.ls0
.le; SPLOTS (simple)
.le; SPLOTSX (flexible axis specification)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Special plot formats
.ls0
.le; SEISPL (forms used in seismic data plots)
.le; BARCHR (bar chart)
.le; PICHRT (pie chart)
.le; LSPLOT (options via array)
.els
.tp4
.hl2 Contour Plot with equally spaced data
.ls0
.le; CNTRLN (simple, robust)
.le; LCNTR (simple, less-robust, contour line types and labels)
.els
.tp4
.hl2 Contour Plot with unequally spaced data
.ls0
.le;CNTLN (triangulates points then contours)
.els
.tp4
.hl2 3-d Surface slices
.ls0
.le; VAX3D (simple)
.le; VAX3DX (more complex, with flexible axis specification)
.els
.tp4
.hl2 3-d Surface mesh (no hidden line removal):
.ls0
.le; MESH3D (simple)
.le; MESH3DX (more complex, with flexible axis specification)
.els
.tp4
.hl2 3-d Surface mesh (hidden line removal)
.ls0
.le; MVAX3D (simple)
.le; MVAX3DX (more complex, with flexible axis specification)
.els
.tp4
.hl2 3-d Surface mesh with contour plot (hidden line removal)
.ls0
.le; CVAX3D (simple)
.le; CVAX3DX (more complex, with flexible axis specification)
.els
.tp4
.hl2 3-d Surface triangular mesh (hidden line removal)
.ls0
.le; T3DH (uses INIT3DH)
.els
.tp4
.hl2 Unequally sampled 3-d Surface (hidden line removal):
.ls0
.le; TRIG3DH (uses INIT3DH)
.els
.tp4
.hl2 3-d Histogram with hidden line removal
.ls0
.le; HIST3D (uses INIT3DH)
.le; MVAX3D (simple)
.le; MVAX3DX (more complex, with flexible axis specification)
.le; CVAX3D (simple, can include contour plot)
.le; CVAX3DX (with flexible axis specification, with contour plot)
.els
.tp4
.hl2 3-d Contour Plot with equally spaced data (no hidden line removal)
.ls0
.le; CNT3D (simple, robust)
.le; CNT3DX (more complex, with flexible axis specification)
.els
.tp4
.hl2 4/5-d Surface plots:
.ls0
.le; VAX5D (slices)
.le; MVAX5D (mesh/histogram with hidden line removal)
.els
.pg
.hl1 SUBROUTINE BARCHR
.p
~BARCHR plots a bar chart with optionally shaded bar segments and
descriptive legends. In addition, multiple lines with shading between
lines can be plotted. Legend can be automatically placed
or the user can specify the location of the legend. In the bar chart
mode, bars can run vertically or horizontally.
b(i,j) specifies the ith bar and jth segment of bar (or horizontal line
depending on iflag option). Top of jth segment or height of jth line
is computed from:
.lit
j
yplotted = ylen * (Sum b(i,k) - bm)/(bx-bm)
k=1
.end lit
.lit
CALL BARCHR(b,nb,ns,sh,iflag,xl,yl,bm,bx,f,nd,sp,sl,nsl,bl,nbl,cs
t,nt,bt,nbt,lt,nlt,tcs,a,d,<ip,<ic>>)
b (R): bar data array dimensioned b(nb,ns)
nb (I): number of bars/number of points in each line
ns (I): number of segments in each bar/number of lines
sh (I): shade option for segment/area between lines
dimensioned sh(ns)
sh shade pattern
____ _________________________
0 no shading
1 -45 deg solid lines
2 horizontal solid lines
3 +45 deg solid lines
4 vertical deg solid lines
5 -45 deg dotted lines
6 horizontal dotted lines
7 +45 deg dotted lines
8 vertical deg dotted lines
9 +/- 45 deg dotted lines
10 vertical/horizontal dotted lines
11 +/- 45 deg solid lines
12 vertical/horizontal solid lines
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : color array not used
= 2 : color array used
(10's) = 0 : bar chart with vertical bars
= 1 : bar chart with horzontal bars
= 2 : multiple line chart
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
xlen (R): length of horizontal axis
< 0 : chart is enclosed in a box
> 0 : only bottom and left axes plotted
ylen (R): length of vertical axis
bm,bx (R): minimum and maximum values to be shown on chart
note: if bx=bm, values computed from b array will be used
f (R): format for numeric labels on axis (see NUMBER)
nd (I): number of divsions of bar length axis
< 0 : division lines shown on chart
= 0 : no division lines or numeric labels
> 0 : division lines shown
sp (R): width of bar (ignored for line plot)
= 0 : auto scaling with evenly spaced bars
> 0 : bars grouped in groups of int(sp). Each
bar has width frac(sp).
sl (C): segment legend labels (CHARACTER data type)
dimensioned sl(ns)
nsl (I): number of characters to use in plotting sl's
= 0 : no label plotted
bl (C): bar labels (CHARACTER data type) dimensioned bl(nb)
nbl (I): number of characters to use in plotting bl's
= 0 : no label plotted
cs (R): legend/bar label character height
t (B): title string placed on top of chart
nt (I): number of characters in t
= 0 : no label plotted
bt (B): title string placed at base of bars
nbt (I): number of characters in bt
= 0 : bt not plotted
lt (B): title string placed on bar length axis
nlt (I): number of characters in lt
= 0 : lt not plotted
tcs (R): height of title strings
a (R): legend location/shading box size dimensioned a(3)
a(1) : legend box size
< 0 : legend placed to right of chart, a(2)
and a(3) are not used
= 0 : no legend
> 0 : a(2) and a(3) used to locate legend
a(2) : x position of lower left corner of legend
a(3) : y position of lower left corner of legend
d (R): distance between shading lines
< 0 : line width array used
> 0 : line width array not used
ip (I): line width array (used only if d<0)
p(1) : axis line width
p(2) : division line width
p(3) : bar outline/data line width
p(4) : labeling line width
p(5) : title line width (bt,lt)
p(6) : title line width (t)
ic (I): color array (used only if mod(|iflag|,10)=2)
c(1) : t title color (return)
c(2) : bt title color
c(3) : lt title color
c(4) : axis numberic label colors
c(5) : sl label color
c(6) : bl label color
c(7) : segment 1 color
c(8) : segment 2 color
... ...
.end lit
.pg
.hl 1 SUBROUTINE CNT3D
.p
CNT3D plots a simple 3-d contour of equally spaced points with no hidden
line removal. (see CNT3DX)
~CNT3D calls CNT3DX using default axis parameters to simplify calling
procedure.
.lit
CALL CNT3D(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,nl,as,ae,ie,iflag,iax,
<xt,nxt,xs,xe,yt,nyt,zt,nzt,zs,ze,<dm,dx<,ic>,l>>>)
See CNT3DX for parameter description.
(iax is limited to a single digit value)
.end lit
.hl 1 SUBROUTINE CNT3DX
.p
.x 3-d contour plot
~CNT3DX is a simple 3-d contour plotting routine. A 3-d surface is
contoured by plotting slices through the surface parallel to the x-z plane
of the surface which have the same y value. The input consists of a 2
dimensional grid of y values. For each contour level the input array
is scanned cell-by-cell. A segment of the contour is determined by linearily
interpolating the edges of the square formed by 4 adjacent points (a cell).
For example, if the current contour value is 1, and y(1,1)=0, y(1,2)=2,
y(2,2)=3, and y(1,2)=4, a contour line is assumed to exist for this
cell as shown:
.lit
y(1,2) y(2,2)
* *
+
\
* + *
y(1,1) y(1,2)
.end lit
This line segment is plotted using the same approach as ~VAX3DX.
No hidden line removal is provided. The calling sequence is nearly
identical for both CNT3DX and VAX3DX. The height of plotted contours
relative to the y axis is calibrated to z axis so that scale can be
taken from the plot. No perspective is used. Options exist to vary
the plotting angle and to plot axes. Contour values can be
distinguished by color and/or line type.
.p
Origin of the plot is in the lower-left corner. The x axis runs
plotted left to right along the plot bottom. The y axis is plotted
as a vertical displacement offset by the z axis value. The z axis appears
to point into the screen. This gives the illusion of depth in the plot.
See AXIS2 for detailed discription of axis parameters.
.p
The pathological case of two contour lines within a cell may case the
routine to incorrectly trace the contour through that cell.
.lit
CALL CNT3DX(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,nl,as,ae,ie,iflag,iax,
<xt,nxt,xs,xe,nmx,nnx,mlx,tsx,ndx,smx,
yt,nyt,nmy,nny,mly,tsy,ndy,smy,
zt,nzt,zs,ze,nmz,nnz,mlz,tsz,ndz,smz,
<dm,dx<,ic>,l>>>)
d (R): array of y values dimensioned d(ndx,ndz)
ndx,ndz (I): x and z dimensions of d array
nx,nz (I): x and z sizes of surface to plot d array
a (R): angle of x axis from horizontal 0-85 degrees
b (R): angle of z axis from horizontal 0-90 degrees
note: origin d(1,1) is in lower-left corner
x axis runs left to right on screen
y axis runs up to down on screen
z axis appears to run into the screen but is angled
to the right
xh,yh,zh (R): length of each axis
nl (I): number of uniformly spaced contour levels,
< 0 : max and min of v are used for as, ae
(j)th contour is (j-1)*(ae-as)/(nl-1)+as
= 0 : int(ae) specifies the number of contour values
where as is an array of the contour values
> 0 : number of uniformly space contour levels,
(j)th contour is (j-1)*(ae-as)/(nl-1)+as
as (R): first contour level (nl > 0)
array of contour levels (nl=0) dimensioned as(int(ae))
ae (R): last contour level (nl > 0)
number of contour levels in as (nl=0) ae>0
ie (I): contour edge option flag
< 0 contour edge added when surface below contour
= 0 no contour edges added
> 0 contour edge added when surface above contour
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000: do not initialize LONGLIB before plotting
(1's digit) = 1 : ignor color and line type arrays
2 : use color array but not line type array
3 : ignore color array, use line type array
4 : use color and line type arrays
(10's digit)= 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axis, using input scale factors dm and dx
= 0 : do not plot axis, optional axis parameters not used
input scaling is computed from input array
> 0 : plot axis, using scaling computed from input array,
need optional axis parameters
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot smoothed values for Y axis
(10's digit) = 0 : Use default axis type
= 1 : Use input AXIS2-type axis parameters
(NOTE: the following optional parameters are used only if iax<0 or
mod(iflag,10)=1)
xt (B): title of x axis (width)
nxt (I): number of characters in xt
= 0 : no axis plotted
> 0 : normal
xs,xe (R): starting and ending values displayed on x axis
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
yt (B): title of y axis (depth)
nyt (I): number of characters in yt
= 0 : no y axis plotted
> 0 : normal
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
zt (B): title of z axis (height)
nzt (I): number of characters in zt
= 0 : no z axis plotted
> 0 : normal
ze,ze (R): starting and ending valued displayed on z axis
nmz (I): number of minor ticks between major ticks on z axis
nnz (I): highlight length of nnz-th minor tick on z axis
mlz (I): number of major tick marks on z axis
tsz (R): size of title and numbers on z axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndz (I): number of digits to right of decimal point on z axis
smz (R): major tick length on z axis
(NOTE: the following are required only if iax<0 or mod(iflag,10)<>0)
dm,dx (R): minimum and maximum values of d array
(NOTE: the following is required only if mod(iflag,10) <> 0)
ic (I): color array
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for contour line 1
ic(6) : color for contour line 2, etc.
... ...
l (I): contour linetype list
.end lit
.pg
.hl1 SUBROUTINE CNTLN
.p
.x contour plot
~CNTLN plots a contour plot of a randomly scatted set of points in
three dimensions. It uses INIT3dH
The input consists of a list of triplets of a surface
value. The triplets are triangulated using ~TRIANGC and contours
determined by linearily interpolating the edges of the triangles.
The contour values may be uniformly spaced between the starting
and end values or from a list. Other than color, the
sequence of plotting (min to max), and line typing of various contour
lines, no contour line identification scheme is provided. Caution
should be excercised when interpreting plot since the distribution of
input points may affect the placement of the contour lines.
.lit
CALL CNTLN(x,y,z,n,xl,yl,iflag,nc,c,ia,xt,nxt,tx,sx,fx,
yt,nyt,ty,sy,fy,t,nt,xm,xx,ym,yx<<,ic>,l>)
x,y,z (R): array of point triplets (x,y,z)
n (I): number of points
xl (R): x axis length in inches
yl (R): y axis length in inches
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000: do not initialize LONGLIB before plotting
(1's digit) = 1 : do not use color or line type arrays
= 2 : use color but not line type array
= 3 : do not use color but use line type array
= 4 : use both color and line type arrays
(10's digit) = 0 : just x,y labeled axes
= 1 : axes and axis line/ticks on top and sides
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
nc (I): number of contour levels
< 0 : c(1) is the minimum contour level and c(2) is
the contour step size, abs(nc) levels plotted
> 0 : c contains contours levels, c dimensioned c(nc)
c (R): list of contour levels
ia (I): axis option flag
< 0 : do not plot axes
> 0 : plot axes
(1's digit) = 1 : plot y axis using max/min of y array
= 2 : plot y axis using max/min of y array
smoothed by SCALE
= 3 : plot y axis using input max/min
= 4 : plot y axis using input max/min
smoothed by SCALE
(10's digit) = 1 : plot x axis using max/min of x array
= 2 : plot x axis using max/min of x array
smoothed by SCALE
= 3 : plot x axis using input max/min
= 4 : plot x axis using input max/min
smoothed by SCALE
(100's digit) = 0 : normal contouring
= 1 : show triangulation used without contours
xt (B): x axis title string
nxt (I): number of characters in title
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
tx (R): number and pattern of axis ticks (see AXIS3)
sx (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fx (R): format of axis number labeling (see AXIS3)
yt (B): y axis title string
nyt (I): number of characters in title
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
ty (R): number and pattern of axis ticks (see AXIS3)
sy (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fy (R): format of axis number labeling (see AXIS3)
t (B): plot title string
nt (I): number of characters in t (limited to 99 characters)
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x axis
xx (R): maximum value of x axis
ym (R): minimum value of y axis
yx (R): maximum value of y axis
ic (I): color list (optionally used)
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color contour (1)
ic(6) : color contour (2), etc.
... ...
l (I): line type list for contours (optionally used)
common /ccntrplt/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE CNTRPLT
.p
.x contour plot
~CNTRPLT plots a contour plot of a uniformly sampled 2-d input
array. The input consists of a 2 dimensional grid of y values. For each
contour level the array is scanned cell by cell.
A contour segment is determined by linearily interpolating the edges of the
square formed by 4 adjacent points (a cell). For example, if the current
contour value is 1, and y(1,1)=0, y(1,2)=2, y(2,2)=3, and y(1,2)=4,
a contour line is assumed to exist for this cell as shown:
.lit
y(1,2) y(2,2)
* *
+
\
* + *
y(1,1) y(1,2)
.end lit
The contour values are uniformly spaced between the input starting
and end values or automatically selected values. Other than color, the
sequence of plotting (min to max), and line typing of various contour
lines, no contour line identification scheme is
provided. Log axes are available but data points are plotted using
linear positioning. (Note: common block scale factors will be log values
if the log axes are selected.)
.p
The pathological case of two contour lines within a cell may case the
routine to incorrectly trace the contour through that cell.
.lit
CALL CNTRPLT(v,ndx,ndy,nx,ny,nl,as,ae,iflag,xl,yl,xt,nxt,yt,nyt,
t,nt,xm,xx,ym,yx<<,ic>,l>)
v (R): 2-d array dimensioned v(ndx,ndy)
ndx,ndy (I): dimensions of v data array
nx,ny (I): number of points in each array dimension
nl (I): number of uniformly spaced contour levels,
< 0 : max and min of v are used for as, ae
(j)th contour is (j-1)*(ae-as)/(nl-1)+as
= 0 : int(ae) specifies the number of contour values
where as is an array of the contour values
> 0 : number of uniformly space contour levels,
(j)th contour is (j-1)*(ae-as)/(nl-1)+as
as (R): first contour level (nl > 0)
array of contour levels (nl=0) dimensioned as(int(ae))
ae (R): last contour level (nl > 0)
number of contour levels in as (nl=0) ae>0
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000: do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : plot box with axis tick marks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
xl (R): x axis length in inches (integer-valued)
> 0 : use input scaling in xm,xx for axis
< 0 : use smoothed input scaling in xm,xx for axis
yl (R): y axis length in inches (integer valued)
> 0 : use input scaling in ym,yx for axis
< 0 : use smoothed input scaling in ym,yx for axis
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string
nt (I): number of characters in t (limited to 99 characters)
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x axis (will be smoothed for xl < 0)
xx (R): maximum value of x axis (will be smoothed for xl < 0)
ym (R): minimum value of y axis (will be smoothed for yl < 0)
yx (R): maximum value of y axis (will be smoothed for yl < 0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponent
ic(6) : color for title (return)
ic(7) : color for contour line 1
ic(8) : color for contour line 2
ic(9) : etc. ...
l (I): line type list for contours (required only if |nt|/100>0)
common /ccntrplt/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl 1 SUBROUTINE CVAX3D
.p
CVAX3D plots a 3d surface with hidden line removal using either
a mesh or a histogram. Optionally, a contour plot can be included
beneath the surface. The vertical space may be specified.
See CVAX3DX.
~CVAX3D calls CVAX3DX using default axis parameters to simplify the calling
procedure.
.lit
CALL CVAX3D(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,
iax,ds,nc,cv,icl,nm,il,ip,
<xt,nxt,xs,xe,yt,nyt,zt,nzt,zs,ze,<dm,dx<,ic>>>)
.end lit
.hl 1 SUBROUTINE CVAX3DX
.p
.x 2-d surface plot
~CVAX3DX plots a 3-d surface with hidden lines removed using ~PLT3D to
produce a mesh surface or ~HLT3D to produce a 2-d histogram with an optional
contour plot made ~GCONTR and plotted on a plane paralell to the surface
plane. Axes and a back panel can be optionally plotted. Optionally,
a path surface may be plotted which connects the surface and contour plots
over a users specified path. The 3d surface is plotted in a manner similar
to MVAX3DX. The visible upper side of the surface and the visible lower
side of the surface can be optionally shown using different colors and
line types.
.x MVAX3DX
.p
Origin of the plot is in the upper-left corner. The x axis runs
left to right along the plot bottom. The y axis is plotted
as a vertical displacement offset by the z axis value. The z axis appears
to point out of the screen. The contour plot is plotted below the surface
with a user-specified vertical spacing. The contour plot plane is plotted
paralell to the z=0 plane of the surface with the (i,j) indicies of the
surface and contour plot aligned vertically. The user may specify a
"path" using "pen" motions. The path is plotted as a curve along the
surface and the contour plot plane with vertical lines at the corresponding
indicies. No hidden line removal is used for the path. The path permits
the user to specify a cut plane to enhance the interpretation of the
plot. The path is specified as a sequence of pen motion commands and
index points of the form,
.TP 8
.lit
ip(1) = 1st path command
ip(2) = 1st i index
ip(3) = 1st j index
ip(4) = 2n path command
ip(5) = 2nd i index
ip(6) = 2nd j index
... etc.
.end lit
Path commands are interpreted according to:
.TP 9
.lit
path command action
______________ ___________________________
0 end of path specification
(indicies ignored)
3 start path at these indicies
2 continue path though indicies
.end lit
The path specificiation should start with a path command of 3
and end with 0. Note that several paths can be specified by
using several path command 3's.
.P
CVAX3DX contains an internal working storage array for use by GCONTR and
PLT3D. The buffer length is sufficient for most surfaces. However, for
very complex surfaces the buffer length may be exceeded. When this occurs
an error message is written to the terminal and the routine terminates.
.lit
CALL CVAX3DX(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,
iax,ds,nc,cv,icl,nm,il,ip,
<xt,nxt,xs,xe,xap,tsx,fdx,
yt,nyt,yap,tsy,fdy,
zt,nzt,zs,ze,zap,tsz,fdz,<dm,dx<,ic>>>)
d (R): array of y values dimensioned d(ndx,ndz)
ndx,ndz (I): x and z dimensions of d array
nx,nz (I): x and z sizes of surface to plot d array
a (R): angle of x axis from horizontal 0-85 degrees
b (R): angle of z axis from horizontal 0-90 degrees
note: origin (1,1) is in upper-left corner
x axis runs left-to-right
y axis runs down-to-up
z axis appears to run outof page screen but
is angled to the right
xh,yh,zh (R): length of each axis
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : plot surface as a mesh (PLT3D)
= 1 : plot surface as 2-d historgram (HLT3D)
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axis, using input scale factors dm and dx
= 0 : do not plot axis, axis parameters (xt...dx) not used
scaling derived from d array is used
> 0 : plot axis, using scaling derived from d array, only
axis parameters xt thru ze required.
(1's digit) = 1 : plot actual max/min or input values for Y axis
= 2 : plot smoothed values for Y axis
(10's digit) = 0 : plot contour, surface axes with back panel
= 1 : plot contour, surface axes w/o back panel
= 2 : plot contour axes w/o surface axes, back panel
= 3 : plot surface axes w/o back panel, contour axes
= 4 : plot surface axes, back panel w/o contour axes
(100's digit) = 0 : use default axis type
= 1 : use input AXIS3 parameters
ds (R): vertical spacing between contour plane and minimum
value of a plane
nc (I): number of contours
< 0 : iabs(nc) contours plotted, the (j)th contour
is (max(a)-min(a))/(iabs(nc)-1). values used
are returned in cv
> 0 : contours specified in cv used
cv (R): contour level array dimensioned dv(iabs(nc)
icl (I): contour labeling option
< 0 : label with contour value (number with n digits
to the right of the decimal point)
= 0 : no labels on contours
> 0 : label contours with ASCII characters (nl <= 26)
nm (I): minimum line segments before contour labeled
< 0 : line type array used
> 0 : line type array not used
il (I): array of line types dimensioned il(iabs(nc)+2)
il(1) = underside of surface
il(2) = path line
il(3) = contour line 1
il(4) = contour line 2
... (solid line type on return)
ip (I): path specification array (see notes above)
if ip(1) = 0, remainder of array ignored
(NOTE: following optional axis paramters are used only if
iax<0 or mod(iflag,10)=1)
xt (B): title of x axis (width)
nxt (I): number of characters in xt
= 0 : no axis plotted
> 0 : normal
xs,xe (R): starting and ending values displayed on x axis
xap (R): axis tick pattern (see AXIS3)
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdx (R): axis number label format (see AXIS3)
yt (B): title of y axis (height)
nyt (I): number of characters in yt
= 0 : no y axis plotted
> 0 : normal
yap (R): axis tick pattern (see AXIS3)
tsy (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdy (R): axis number label format (see AXIS3)
zt (B): title of z axis (depth)
nzt (I): number of characters in zt
= 0 : no z axis plotted
> 0 : normal
ze,ze (R): starting and ending valued displayed on z axis
zap (R): axis tick pattern (see AXIS3)
tsz (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdz (R): axis number label format (see AXIS3)
(NOTE: the following are required only if iax<0 or mod(iflag,10)=1)
dm,dx (R): minimum and maximum scale values for d array
ic (I): color list
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for upper surface
ic(6) : color for lower surface
ic(7) : color for contour 1
ic(8) : color for contour 2
... ...
(color for last contour on return)
.end lit
.pg
.hl1 SUBROUTINE GLPLOT
.p
~GLPLOT plots the curve defined in x,y with ~log and/or ~linear scaling
including appropriate axes and plot title. Various options select the
format of the axes plotting. This subroutine is designed to plot one
or more
y value curves simultaneously. This subroutine permits axis parameter
flexibility (AXIS3) and dimensioning for y array. GLPLOT is a good
general purpose plotting routine.
.lit
CALL GLPLOT(x,y,nld,npd,nl,np,iflag,isym,xl,yl,xt,xc,xf,xtitle,nxt,
yt,yc,yf,ytitle,nyt,t,nt,<xm,xx,ym,yx<<,ic>,l>>)
x (R): array of x values dimensioned at least x(np)
y (R): array of y values dimensioned y(npd,nld)
nld (I): dimension of y (number of lines dimensioned)
npd (I): dimension of y (number of points dimensioned)
nl (I): number of data lines to plot from y array
np (I): number of points per line
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000: do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
isym (I): plot a symbol every isym'th point
< 0 : symbols only plotted, no line
= 0 : no symbols, line only
> 0 : symbol plotted every isym'th point
xl (R): x axis length in inches
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (R): x axis tick mark pattern (see AXIS3)
xc (R): x axis character size
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
xf (R): x axis number label format (see AXIS3)
xtitle(B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (R): y axis tick mark pattern (see AXIS3)
yc (R): x axis character size
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
yf (R): y axis number label format (see AXIS3)
ytitle(B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponent
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
l (I): line type of data lines list (required only if |nt|/100>0)
common /cglplot/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE HIST3D
.p
.x surface plot
~HIST3D plots a 2-d histogram as square columns plotted as z values
from the x,y plane with hidden line removal.
The input consists of the values of the z axis for
each (x,y) point on the plane. Each square grid is plotted as two triangles
using either ~SKETCH or ~PLT3DH permitting hidden line removal if desired.
HIST3D calls ~INIT3DH to initialize the 3-d hidden line package. Default
space is provided in the INIT3DH common block. The ISIZE variable will
be reset to the internal size if its value is smaller than the internal
size. Sufficient space in the internal common block
is provided for reasonably complex surfaces.
.lit
CALL HIST3D(z,ndx,ndy,nx,ny,s,p,t,dv,zref,xl,yl,zl,iflag,ia,
xt,nxt,tx,sx,gx,fx,
yt,nyt,ty,sy,gy,fy,
zt,nzt,tz,sz,gz,fz,
xm,xx,ym,yx,zm,zx<,ic>)
z (R): array of z values
ndx,ndy(I): dimensions of z array
nx,ny (I): number of points in each dimension to use of z array
s,p,t (R): yaw,roll,pitch angles of axes (see INIT3DH)
dv (R): perspective scale factor for INIT3DH
< 0 : no hidden lines in SKETCH, INIT3DH called
= 0 : INIT3DH not called to initialize 3d package,
(INIT3DH previously called)
> 0 : hidden lines in SKETCH, INIT3DH called
= 9999 : no perspective in INIT3DH
zref (R): reference value from which columns are drawn from
xl (R): x axis length in inches
yl (R): y axis length in inches
zl (R): z axis length in inches
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : do not use color array
= 2 : use color array
(10's digit) = 0 : hidden line removal for surface only
= 1 : hidden line removal for axis and surface
= 2 : no hidden line removal (SKETCH not used)
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
ia (I): axis option flag
< 0 : plot axis use input z axis scale
= 0 : do not plot axes
> 0 : plot axis use computed z axis scale
(1's digit) = 1 : plot y axis using input scale
= 2 : plot y axis using input, smoothed scale
(10's digit) = 1 : plot x axis using input scale
= 2 : plot x axis using input, smoothed scale
xt (B): x axis title string
nxt (I): number of characters in x axis title
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
tx (R): number and pattern of axis ticks (see AXIS3)
sx (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gx (R): rotation angle for x axis (see AXIS3DH)
fx (R): format of axis number labeling (see AXIS3)
yt (B): y axis title string
nyt (I): number of characters in y axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
ty (R): number and pattern of axis ticks (see AXIS3)
sy (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gy (R): rotation angle for y axis (see AXIS3DH)
fy (R): format of axis number labeling (see AXIS3)
zt (B): z axis title string
nzt (I): number of characters in z axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
tz (R): number and pattern of axis ticks (see AXIS3)
sz (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gz (R): rotation angle for z axis (see AXIS3DH)
fz (R): format of axis number labeling (see AXIS3)
xm,xx (R): minimum, maximum value displayed on x axis
ym,yx (R): minimum, maximum value displayed on y axis
zm,zx (R): minimum, maximum value of z axis (required if ia < 0)
ic (I): color list (required if 1's digit of iflag=2)
ic(1) : color for axes
ic(2) : color for surface
.end lit
.pg
.hl1 SUBROUTINE LCNTR
.p
.x contour plot
~LCNTR plots a contour plot of a uniformly sampled 2-d input array.
LCNTR is similar to CNTRPLT but permits hardware line types.
The input consists of a 2 dimensional grid of v values. A
contour is determined by linearily interpolating the edges of the square
formed by 4 adjacent points (see CNTRPLT). LCNTR connects the line segments
of constant contour before plotting and can optionally label the contour lines
with alphabetic codes or the numerical value of the contour.
Log axes are available but data points are plotted using
linear positioning. (Note: common block scale factors will be log values
if the log axes are selected.)
.p
When the contour levels are input (nl>0), contours can be suppressed
in a region by setting the value of the input array greater than 1.E20.
LCNTR uses the contouring routine GCONTR.
.x GCONTR
.lit
CALL LCNTR(v,ndx,ndy,nx,ny,nl,cl,n,m,iflag,iw,xl,yl,xt,nxt,yt,nyt,
t,nt,xm,xx,ym,yx<<,ic>,l>)
v (R): 2-d array of values dimensioned v(ndx,ndy)
ndx,ndy (I): dimensions of data array
nx,ny (I): number of points in each array dimension
nl (I): number of uniformly spaced contour levels,
< 0 : max and min of v are used to define contours.
the (j)th contour is computed from max,min of
input array according to,
(j-1)*(max(v)-min(v))/(nl-1)+min(v)
> 0 : number of contour levels specified in cl
cl (R): array of contour levels dimensioned cl(nl)
if nl < 0 contour levels used are (returned) in cl
n (I): contour labeling option
< 0 label with contour value (number with n digits
to the right of the decimal point)
= 0 no labels on contours
> 0 label contours with ASCII characters (nl <= 26)
m (I): minimum line segments before contour labeled (m > 1)
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iw (I): working array dimensioned at least (2*nx*ny+1)/31
xl (R): x axis length in inches (integer valued)
> 0 : use input scaling in xm,xx for axis
< 0 : use smoothed input scaling in xm,xx for axis
yl (R): y axis length in inches (integer valued)
> 0 : use input scaling in ym,yx for axis
< 0 : use smoothed input scaling in ym,yx for axis
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string
nt (I): number of characters in t (limited to 99 characters)
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): input minimum value of x axis
xx (R): input maximum value of x axis
ym (R): input minimum value of y axis
yx (R): input maximum value of y axis
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponent
ic(6) : color for title (return)
ic(7) : color for contour line 1
ic(8) : color for contour line 2
ic(9) : etc.
l (I): line type list for contours (required if |nt|/100>0)
common /ccntrplt/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl 1 SUBROUTINE LSPLOT
.p
~LSPLOT is a general single/multiple data line routine for plotting
lines or scatterplots. Optionally, error bars and symbols can be
added. LSPLOT differs in philosophy from most other LONGLIB MASTER
routines in that plotting options are passed via an option array routine.
The routine is designed to produce a reasonable plot with the option
array set to all zeros. The output format is changed by initializing
selected array elements to the values described below.
This permits simple but flexible specification of the plot format.
.lit
CALL LSPLOT(x,y,ndp,ndl,iflag,f,c,nc)
x (R): x input array dimensioned x(ndp,ndl). Depending
on option selected, x need only be dimensioned
x(ndp) -- this is the default option.
y (R): y input array dimensioned y(ndp,ndl). If
ndl=1 then y may dimensioned y(ndp)
ndp (I): number of data points/line dimension
ndl (I): number of data lines dimension
iflag (I): LONGLIB option flag (one's digit arbitrary)
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000 : do not initialize LONGLIB before plotting
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
f (R): option array dimensioned at least f(53)
(described below)
c (C): array of strings dimensioned C(3+ndl)
c(1) : x axis title
c(2) : y axis title
c(3) : top title
c(4) : line 1 legend (optionally used)
c(5) : line 2 legend (optionally used)
... ...
nc (I): array of string lengths dimensioned nc(3+ndl)
nc(1) : number of characters to use in C(1)
nc(2) : number of characters to use in C(2)
... ...
.end lit
.p
The array elements of the option array f are interpretted according
to the following table. Some parameters have default values (shown
in square brackets). These are used when the input value is zero.
A simple plot may be produced by setting all the elements of f to
zero. Note that user specified input scaling factors should be
powers of ten when the log axis specification is selected. An optional
legend may be plotted. The legend consists of a column
of line/simple examples (if selected) and input text.
.tp 8
.lit
array range of
index values action for each value
------- -------- ------------------------
1 0<=.<=ndp number of points/line to plot [ndp]: 0=ndp used
2 0<=.<=ndl number of lines to plot [nl]: 0=ndl used
3 -1/0/1 x scale: 0=auto,smoothed; 1=auto,nosmooth; -1=user
4 xmin user supplied scale value (used if f(3)<0)
5 xmax user supplied scale value (used if f(3)<0)
6 -1/0/1 y scale: 0=auto,smoothed; 1=auto,nosmooth; -1=user
7 ymin user supplied scale value (used if f(6)<0)
8 ymax user supplied scale value (used if f(6)<0)
9 0/1 x value usage: 0=first line of x data array
used for all y lines; 1=lines of x,y paired
10 0/1 connect plotted points: 0=yes; 1=no
11 >=0 symbol plotted every ()th point: 0=no symbols
12 >=0 line symbol size [0.1]: 0=use default
13 >=0 symbol number for first data line, each line
then uses next symbol in sequence
14 8<.<8 error bar option (see below): 0=no error bars
16 >=0 error bar size [0.1]: 0=default used
17 0/1 vertical line from points to reference value:
0=no; 1=yes
18 rval reference value
19 -1/0/1 x axis type: 0=linear; 1=log axis, -1=no axis
20 -1/0/1 y axis type: 0=linear; 1=log axis, -1=no axis
21 >=0 x axis length [7.0]: 0=default used
22 >=0 y axis length [5.0]: 0=default used
23 >=0 x axis tick pattern (see axis3) [7.00]: 0=default
24 >=0 y axis tick pattern (see axis3) [5.00]: 0=default
25 0/1 x axis title side of axis: 0=below; 1=above
26 0/1 y axis title side of axis: 0=left; 1=right
27 0/1 x axis auto exponent enable: 0=enable; 1=disable
28 0/1 y axis auto exponent enable: 0=enable; 1=disable
29 0/1 x axis tick side: 0=below; 1=above
30 0/1 y axis tick side: 0=left; 1=right
31 0/1 x axis number orientation: 0=horizontal; 1=vertical
32 0/1 y axis number orientation: 0=vertical; 1=horizontal
33 0/1 x axis numbers/title: 0=shown; 1=not shown
34 0/1 y axis numbers/title: 0=shown; 1=not shown
35 0/1 use x=log10(abs(x values)+1.e-34): 0=no; 1=yes
36 0/1 use y=log10(abs(y values)+1.e-34): 0=no; 1=yes
37 -1/0/1 add mirror x axis: 0=no; 1=w/labels; -1:w/o labels
38 -1/0/1 add mirror y axis: 0=no; 1=w/labels; -1:w/o labels
(mirrored axes placed on opposite from normal axis)
39 >=0 x axis label size [0.15]: 0=use default
40 >=0 y axis label size [0.15]: 0=use default
41 >=0 top title character size [0.18]: 0=use default
42 0/1/2/3 grid: 0=no grid; 1=solid; 2=dotted; 3=ticked
43 -1/0/1 legend: 0=no legend; 1=right side; -1=user locate
44 xval user specified lower-left corner of legend
45 yval user specified lower-left corner of legend
46 0/1 show plot symbol on legend: 0=no; 1=yes
47 0/1 show line segment on legend: 0=no; 1=yes
48 >=0 legend character height [0.12]: 0=use default
49 >=0 legend line segment length [0.5]: 0=use default
50 -1/0/1 top title justify: 0=center; -1:left; 1:right
51 0/1 plot horizontal reference line: 0=no; 1=yes
52 0/1 use linetype array values: 0=no; 1=yes
53 0/1 use color array values: 0=no; 1=yes
54 >=0 color index #1: 0=color value 1 used
55 >=0 linetype index #1
56 >=0 color index #2: 0=color value 1 used
57 >=0 linetype index #2
... ... ... etc ...
.end lit
.p
The optional error bar specification, when non-zero, changes
interpretation of lines. The first line (and every third line)
conidered a "center" line. The second line specifies the relative
error (to be added to the first line) used for plotting the tops
of the error bars. The third line is used similarily to locate
the bottoms of the error bars. When the error bar specification
is negative the center line points are marked with a special "x"
(in addition to any other option). The absolution value of the
specifiation determines the type of error bar according to the
following table.
.tp10
.lit
value type of error bar
------ ---------------------------------------------------
1 line connecting relative errors
2 1 + horizontal bars at relative errs
3 1 + vertical bars at relative errs
4 double line connecting rel. errs+horizontal bars
5 double line connecting rel. errs+vertical bars
6 vertical rectangle w/top and bottom rel. errs
7 rectangle with corners at relative errors
.end lit
.p
The color and line type index (when enabled) are used according to the
following table.
.tp12
.lit
index # color usage linetype usage
--------- ------------- ----------------
1 x axis x axis
2 x axis numbers y axis
3 x axis title title
4 x axis exponent legend titles
5 y axis reference line
6 y axis numbers error bars
7 y axis title line #1 linetype
8 y axis exponent line #2 linetype
9 title etc.
10 legend titles ...
11 reference line ...
12 grid ...
13 line #1 color ...
14 line #2 color ...
... ... etc. ... ...
.end lit
.pg
.hl 1 SUBROUTINE MESH3D
.p
MESH3D plots a 2-d surface as 3d mesh using the same techniques
as ~VAX3D but without hidden line removal.
~MESH3D calls MESH3DX using default axis parameters to simplify
the calling procedure.
.lit
CALL MESH3D(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,<xt,nxt,xs,xe,
yt,yzt,zt,nzt,zs,ze,<dm,dx<,ic>>>)
See MESH3DX for parameter description.
(iax is limited to a single digit value)
.end lit
.hl 1 SUBROUTINE MESH3DX
.p
.x VAX3DX
.x 2-d surface plot
~MESH3DX is a simple 3-d surface plotting routine. A 3-d surface is
plotted as a simple mesh grid. The plotting method is similar to
VAX3DX. No hidden line removal is done.
The height of plotted surface relative to its y axis value
is calibrated to z axis. No perspective is used.
Options exist to varying the plotting angle and to plot axes.
.p
Origin of the plot is in the lower-left corner. The x axis runs
plotted left to right along the plot bottom. The y axis is plotted
as a vertical displacement offset by the z axis value. The z axis
appears to point into the screen. This gives the illusion of depth.
.lit
CALL MESH3DX(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,
<xt,nxt,xs,xe,nmx,nnx,mlx,tsx,ndx,smx,
yt,nyt,nmy,nny,mly,tsy,ndy,smy,
zt,nzt,zs,ze,nmz,nnz,mlz,tsz,ndz,smz,
<dm,dx<,ic>>>)
d (R): array of y values dimensioned d(ndx,ndz)
ndx,ndz (I): x and z dimensions of d array
nx,nz (I): x and z sizes of surface to plot d array
a (R): angle of x axis from horizontal 0-85 degrees
b (R): angle of z axis from horizontal 0-90 degrees
note: origin (1,1) is in lower-left corner
x axis runs left to right on screen
y axis runs up to down on screen
z axis appears to run into the screen but
is angled to the right
xh,yh,zh (R): length of each axis
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000: do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : Plot sides
= 1 : Do not plot sides
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axes, using input scale factors dm and dx
= 0 : axes not plotted, parameters (yt...dx) not used.
scaling derived from d array is used
> 0 : plot axes, use max and min of d array to compute
dm and dx, need axis parameters yt thru ze
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot smoothed values for Y axis
(10's digit) = 0 : Use default axis type
= 1 : Use input AXIS2-type axis parameters
(NOTE: the following optional paramters are used only if
iax < 0 or mod(iflag,10)=1)
xt (B): title of x axis (width)
nxt (I): number of characters in xt
= 0 : no axis plotted
> 0 : axis plotted
xs,xe (R): starting and ending values displayed on x axis
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
yt (B): title of y axis (depth)
nyt (I): number of characters in yt
= 0 : no y axis plotted
> 0 : normal
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
zt (B): title of z axis (height)
nzt (I): number of characters in zt
= 0 : no z axis plotted
> 0 : normal
ze,ze (R): starting and ending valued displayed on z axis
nmz (I): number of minor ticks between major ticks on z axis
nnz (I): highlight length of nnz-th minor tick on z axis
mlz (I): number of major tick marks on z axis
tsz (R): size of title and numbers on z axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndz (I): number of digits to right of decimal point on z axis
smz (R): major tick length on z axis
(NOTE: the following optional parameters are required if
iax < 0 or mod(iflag,10)=1)
dm,dx (R): minimum and maximum scale values for d array
ic (I): color list
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for plot surface (return)
.end lit
.pg
.hl 1 SUBROUTINE MVAX3D
.p
MVAX3D plots a 3d mesh surface or 2-d histogram with hidden line removal.
See MVAX3DX. The calling format is similar to VAX3D.
~MVAX3D calls ~MVAX3DX using default axis parameters to simplify calling
procedure.
.lit
CALL MVAX3D(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,<xt,nxt,
xs,xe,yt,nyt,zt,nzt,zs,ze,<dm,dx<,ic>>>)
.end lit
.hl 1 SUBROUTINE MVAX3DX
.p
.x 2-d surface plot
~MVAX3DX is a 3-d surface plotting routine which plots a
3-d surface as mesh with hidden lines removed using the ~PLT3D routine
or a 2-d histogram with hidden lines removed using the ~HLT3D routin.
Axes and a axis back panel can be optionally plotted as well.
The upper side of the visible surface can be shown with optional side
plates on the mesh surface.
If the side plates are not used or for histogram plotting, the lower side of the
visible surface may be displayed in different colors or using a dotted line.
.p
Origin of the plot is in the upper-left corner. The x axis runs
left to right along the plot bottom. The y axis is plotted
as a vertical displacement offset by the z axis value. The z axis appears
to point out of the screen.
.P
MVAX3DX contains an internal working storage array for use by
PLT3D and HLT3D. The buffer length is sufficient for most surfaces.
However, for
very complex surfaces the buffer length may be exceeded. When this occurs
an error message is written to the terminal and the routine terminates.
.lit
CALL MVAX3DX(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,
<xt,nxt,xs,xe,xap,tsx,fdx,
yt,nyt,yap,tsy,fdy,
zt,nzt,zs,ze,zap,tsz,fdz,<dm,dx<,ic>>>)
d (R): array of y values dimensioned d(ndx,ndz)
ndx,ndz (I): x and z dimensions of d array
nx,nz (I): x and z sizes of surface to plot d array
a (R): angle of x axis from horizontal 0-85 degrees
b (R): angle of z axis from horizontal 0-90 degrees
note: origin (1,1) is in upper-left corner
x axis runs left-to-right
y axis runs down-to-up
z axis appears to run outof page screen but
is angled to the right
xh,yh,zh (R): length of each axis
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : mesh surface w/side panels, lower side of
surface not shown
= 1 : mesh surface w/no side panels, lower side of
surface shown using dotted lines
= 2 : mesh surface w/no side panels, lower side of
surface shown using solid lines
= 3 : mesh surface w/no side panels, lower side of
surface not shown
= 4 : histogram surface, lower side of surface
shown using dotted lines
= 5 : histogram surface, lower side of surface
shown using solid lines
= 6 : histogram surface, lower side of surface
shown using solid lines
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axes, using input scale factors dm and dx
= 0 : no axes plotted, parameters (xt...dx) not used.
scaling derived from d array is used
> 0 : plot axes, use scaling derived from d array, only
axis parameters xt thru ze required.
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot smoothed values for Y axis
(10's digit) = 0 : Use default axis type
= 1 : Use input AXIS3 parameters
(100's digit) = 0 : Do not plot backplane
= 1 : Plot backplane
(NOTE: following optional axis paramters are used only if
iax<0 or mod(iflag,10)=1)
xt (B): title of x axis (width)
nxt (I): number of characters in xt
= 0 : no axis plotted
> 0 : normal
xs,xe (R): starting and ending values displayed on x axis
xap (R): axis tick pattern (see AXIS3)
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdx (R): axis number label format (see AXIS3)
yt (B): title of y axis (height)
nyt (I): number of characters in yt
= 0 : no y axis plotted
> 0 : normal
yap (R): axis tick pattern (see AXIS3)
tsy (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdy (R): axis number label format (see AXIS3)
zt (B): title of z axis (depth)
nzt (I): number of characters in zt
= 0 : no z axis plotted
> 0 : normal
ze,ze (R): starting and ending valued displayed on z axis
zap (R): axis tick pattern (see AXIS3)
tsz (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
fdz (R): axis number label format (see AXIS3)
(NOTE: the following optional parameters are required if
iax<0 or mod(iflag,10)=1)
dm,dx (R): minimum and maximum scale values for d array
ic (I): color list
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for plot surface (return)
.end lit
.pg
.hl 1 SUBROUTINE MVAX5D
.p
.x 5-d surface
.x 4-d surface plot
.x MVAX3D
~MVAX5D plots a 4 or 5-d surface by plotting slices through the 3rd and
4th dimensions in a 2-d array of of 3-d plots. Each 3-d surface
plots d(*) as a function of 2 of the dimensions using MVAX3D.
.p
Origin of the plot is in the lower-left corner. The X axis runs
left to right along the subplot bottom. The Y axis is plotted out
the page of the subplot (see MVAX3D).
The Z axis runs left to right in subplots
with the W axis vertical subplots.
.tp 8
.lit
^ W d
| |
| |__X
| /
| Y
----------> Z
.end lit
.p
Since the subplots may runoff the edge of the plotting page, the routine
includes a page size option to issue a NEWPAGE and plot the additional
subplots on separate pages. A shrinking factor is included to shrink the
subplots.
Labeling of the W and Z axis is due in the lower right hand corner.
Each subplot is further tagged with the corresponding W and Z axis
value. A multiple page plot can be pasted together to form a large
representation of a 5-d (or 4-d) surface.
.lit
CALL MVAX5D(d,nd,n,a,b,iflag,iax,iform,w,xh,yh,zh,ph,pl,fac,iw,iz,
st,en,t1,nt1,t2,nt2,t3,nt3,t4,nt4,dt,ndt,<dm,dx<,ic>>)
d (R): array to plot dimensioned d(nd(1),nd(2),nd(3),nd(4))
nd (I): array of containing dimensions of d array
n (I): array of number of points in each dimension to plot
a,b (R): angles a,b for MVAX3D subplot
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : mesh surface w/side panels, lower side of
surface not shown
= 1 : mesh surface w/no side panels, lower side of
surface shown using dotted lines
= 2 : mesh surface w/no side panels, lower side of
surface shown using solid lines
= 3 : mesh surface w/no side panels, lower side of
surface not shown
= 4 : histogram surface, lower side of surface
shown using dotted lines
= 5 : histogram surface, lower side of surface
shown using solid lines
= 6 : histogram surface, lower side of surface
shown using solid lines
(100's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axes, use input scale factors dm and dx
= 0 : no axes plotted, parameters (xt...dx) not used.
scaling derived from d array
> 0 : plot axes, scaling derived from d array, only
axis parameters xt thru ze required.
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot smoothed values for Y axis
(10's digit) = 0 : Axes plotted for all subplots
= 1 : Axes plotted only for first subplot
iform (I): plot format code
selects which dimension of d array is to become
which output axis
plot axis plot axis
Code X Y Z W Code X Y Z W
_____ ____________ _____ ____________
1 input: 1 2 3 4 13 3 1 2 4
2 dimen- 1 2 4 3 14 3 1 4 2
3 sion 1 4 2 3 15 3 2 1 4
4 number 1 4 3 2 16 3 2 4 1
5 1 3 2 4 17 3 4 1 2
6 1 3 4 2 18 3 4 2 1
7 2 1 3 4 19 4 1 2 3
8 2 1 4 3 20 4 1 3 2
9 2 4 3 1 21 4 2 1 3
10 2 4 1 3 22 4 2 3 1
11 2 3 4 1 23 4 3 1 2
12 2 3 1 4 24 4 3 2 1
w (R): working array dimensioned at least n(x)*n(y)
xh,yh,zh (R): length of each axis of MVAX3D subplot
ph,pl (R): page height, length when multiple pages required
fac (R): shrink factor for subplots (2 == FACTOR(1/2))
iw,iz (I): plot every iw'th and iz'th subplots
(NOTE: the axis titles, number of characters, start/stop
values are permuted along with d array dimensions)
st,en (R): arrays containing axes start and end values
t1 (B): title corresponding to 1st dimension of d
nt1 (I): number of characters in title t1
= 0 : no axis plotted
> 0 : axis plotted
t2 (B): title corresponding to 2st dimension of d
nt2 (I): number of characters in title t2
= 0 : no axis plotted
> 0 : axis plotted
t3 (B): title corresponding to 3rd dimension of d
nt3 (I): number of characters in title t3
= 0 : no axis plotted
> 0 : axis plotted
t4 (B): title corresponding to 4th dimension of d
nt4 (I): number of characters in title t4
= 0 : no axis plotted
> 0 : axis plotted
t5 (B): title corresponding to 5th dimension of d
nt5 (I): number of characters in title t5
= 0 : no axis plotted
> 0 : axis plotted
(NOTE: the following optional parameters are required if
iax<0 or mod(iflag,10)=1)
dm,dx (R): minimum and maximum scale values of plot
ic (I): color array
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for plot surface (return)
.end lit
.pg
.hl1 SUBROUTINE PHIST
.p
~PHIST is a generalized ~histogram plotting program with various
plot format controls. Shading may done under the histogram columns.
The histogram height may be plotted on top of each histogram column
vertically. The mean and +/- sigma variations may be indicated on the
plot output. Note: PHIST does not do the histogramming. This is left
to the user.
.lit
CALL PHIST(a,n,t,nt,xl,yl,s,ns,xt,nxt,xm,xx,ax,
iflag,ishad,am,as<,ic>)
a (R): array of heights of histogram columns
n (I): number of points in a array to plot
t (B): title string
nt (I): number of characters in t
= 0 : no title
< 0 : use color array
xl (R): length of x axis in inches (integer-valued real number)
yl (R): length of y axis in inches (integer-valued real number)
s (B): subtitle string
ns (I): number of characters in s
xt (B): x axis title
nxt (I): number of characters in xt
xm (R): minimum value displayed on x axis
xx (R): maximum value displayed on x axis
ax (R): maximum value of a
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : plot number value of column on top of column
= 1 : no numeric values on top of histogram columns
= 0 : no axis or title (histogram columns only)
(10's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
ishad (I): shade option flag
< 0 : shade with solid line
= 0 : no shading
> 0 : shade with line of type ishad
am (R): mean value of histogram to plot (in relation to xm,xx)
as (R): standard deviation of histogram to plot
< 0 : neither mean nor sigma values indicated on plot
= 0 : only mean value indicated on plot
> 0 : mean and +/- sigma values indicated on plot
ic (I): color list
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for mean label
ic(6) : color for sigma label
ic(7) : color for title
ic(8) : color for subtitle
ic(9) : color for histogram columns (return)
common /cphist/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE PICHRT
.p
~PICHRT plots a circular pie chart with optionally shaded wedges, and
descriptive legends. One or more of the slices may be "exploded" outward
from the pie chart center for emphasis. The chart legend can be character
labels only or can include shade legends. Labels can be automatically placed
around the pie chart or located at the bottom of the page. Optionally, the
user can specify the locations of the legends.
.lit
CALL PICHRT(x,y,r,d,iflag,as,ae,n,a,sh,iw,l,nl,cs,sl,
t,nt,tcs,d,<p,<ic>>)
x,y (R): location of pie chart center
r (R): radius of pie chart segments (r>0)
d (R): distance from chart center for "exploded" segments
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : color array not used
= 2 : color array used
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
as (R): starting angle of first segment
n (I): number of segments (n>0)
a (R): array of segment sizes (angular width of jth segment
is a(j)*360/(Sum a(i),i=1,N))
sh (R): shade option for each pie segment
sh shade pattern
____ _________________________
0 no shading
1 -45 deg solid lines
2 horizontal solid lines
3 +45 deg solid lines
4 vertical deg solid lines
5 -45 deg dotted lines
6 horizontal dotted lines
7 +45 deg dotted lines
8 vertical deg dotted lines
9 +/- 45 deg dotted lines
10 vertical/horizontal dotted lines
11 +/- 45 deg solid lines
12 vertical/horizontal solid lines
iw (I): array of segment outline linewidths (1-9)
l (C): array of segment labels for legend (CHARACTER)
nc (I): maximum number of characters in legend string
cs (R): legend character height
sl (R): legend shaded box size
< 98: legend located below chart w/o box
< 0 : legend located below chart with shaded box
= 0 : no legend
> 0 : legend located around chart with shaded box
> 98: legend located around chart w/o box
t (B): chart title string
nt (I): number of characters in t
< 1 : no title plotted
tcs (R): chart title string height
d (R): distance between shading lines
p (R): array containing locations of lower-left corner
of legend box/string (used only if tc < 0)
ic (I): color array (used only if mod(|iflag|,10)=2)
ic(1) : title color (return)
ic(2) : legend string color
ic(3) : segment 1 color
ic(4) : segment 2 color
... ...
.end lit
.pg
.hl1 SUBROUTINE PLOTLG
.p
~PLOTLG is a very simple routine which
plots a single curve defined in x,y with ~log and/or ~linear
scaling including appropriate axes and plot title. Various options
select the format of plotting and type of grid.
.lit
CALL PLOTLG(x,y,n,iflag,xl,yl,xt,nxt,yt,nyt,t,nt,
<xm,xx,ym,yx<<,ic>,l>>)
x (R): array of x values
y (R): array of y values
n (I): number of points in x array
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : ticked cartesian grid, box w/axis ticks
= 6 : plot without box or grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
xl (R): x axis length in inches (integer-valued)
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches (integer-valued)
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: optional color array required if nt<0 or |nt|/100>0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for plotted line
ic(7) : color for title (return)
(NOTE: optional line type array only required if |nt|/100>0)
l (I): line type of data line
if |nt|/100 > 0 : use line type list
common /cplotlg/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE PLOTLG2
.p
~PLOTLG2 is a simple routine to
plot multiple curves defined in x,y in ~log and/or ~linear
scaling including appropriate axes and plot title. Various options
select the format of plotting. This subroutine is designed to plot
many y value curves which may be distinguished by color and/or line
type. This routine is similar to ~PLOTLGX but uses a simpler
axis specification.
.lit
CALL PLOTLG2(x,y,nl,np,iflag,isym,xl,yl,xt,nxt,yt,nyt,t,nt,<xm,
xx,ym,yx<<,ic>,l>>)
x (R): array of x values
y (R): array of y values dimensioned y(np,nl)
nl (I): number of data lines to plot from y array
np (I): number of points in x array
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
isym (I): plot a symbol every isym'th point
< 0 : symbols only plotted, no line
= 0 : no symbols, line only
> 0 : symbol plotted every isym'th point
xl (R): x axis length in inches (integer-valued)
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches (integer-valued)
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
(NOTE: line type list required only if |nt|/100>0)
l (I): line type for data lines list
common /cplotlg2/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE PLOTLGL
.x PLOTLGX
.x linseq
.p
~PLOTLGL plots multiple curves defined in x,y with ~log and/or ~linear
scaling including appropriate axes and plot title using software line
types (LINSEQ). It is similar in character to PLOTLGX. Various options
may be used select the format of plotting. This routine may be used
to plot many y value curves simultaneously with the curves distinguished
by symbols, color, and/or line type. This subroutine permits axis
parameter flexibility and dimensioning for the y array values.
.p
NOTE: the values in the x and y arrays are modified. Upon return they
contain their original contents scaled by xm,dx,ym,dy (see LINE).
.lit
CALL PLOTLGL(x,y,w,nld,npd,nl,np,iflag,isym,xl,yl,ns,s,l,
nmx,nnx,mlx,tsx,ndx,smx,
nmy,nny,mly,tsy,ndy,smy,
xt,nxt,yt,nyt,t,nt,<xm,xx,ym,yx<,ic>>)
x (R): array of x values dimensioned at least x(np)
y (R): array of y values dimensioned y(npd,nld)
w (R): working array dimensioned at least d(3*np+3)
nld (I): dimension of y array (lines)
npd (I): dimension of y array (points)
nl (I): number of data lines to plot from y array
np (I): number of points per data line
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
isym (I): plot a symbol every isym'th point
< 0 : symbols only plotted, no line
= 0 : no symbols, line only
> 0 : symbol plotted every isym'th point
xl (R): x axis length in inches
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
ns (I): smoothing passes (normally zero--see LINSEQ)
s (R): nominal interval length (see LINSEQ)
l (I): linetype array dimensioned l(5*np) (see LINSEQ)
l(1): l1 for line 1
l(2): l2 for line 1
...
l(5): l5 for line 1
l(6): l1 for line 2
l(7): l2 for line 2
...
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
common /cplotlgl/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE PLOTLGX
.p
~PLOTLGX is a routine for
ploting multiple curves defined in x,y with ~log and/or ~linear
scaling including appropriate axes and plot title. Various options
may be used select the format of plotting. This routine may be used
to plot many y value curves simultaneously with the curves distinguished
by symbols, color, and/or line type. This subroutine permits axis
parameter flexibility and dimensioning for the y array values.
.lit
CALL PLOTLGX(x,y,nld,npd,nl,np,iflag,isym,xl,yl,
nmx,nnx,mlx,tsx,ndx,smx,
nmy,nny,mly,tsy,ndy,smy,
xt,nxt,yt,nyt,t,nt,<xm,xx,ym,yx<<,ic>,l>>)
x (R): array of x values dimensioned at least x(np)
y (R): array of y values dimensioned y(npd,nld)
nld (I): dimension of y array (lines)
npd (I): dimension of y array (points)
nl (I): number of data lines to plot from y array
np (I): number of points per line
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
isym (I): plot a symbol every isym'th point
< 0 : symbols only plotted, no line
= 0 : no symbols, line only
> 0 : symbol plotted every isym'th point
xl (R): x axis length in inches
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
l (I): data line type list (required only if |nt|/100 > 0)
common /cplotlgx/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE PLOTSC
.p
~PLOTSC is a very basic routine which plots the curve defined
in x,y with axes and a plot title. Various options select the format
of the plot.
.lit
CALL PLOTSC(x,y,n,iflag,xl,yl,xt,nxt,yt,nyt,t,nt,
<xm,xx,ym,yx<<,ic>,l>>)
x (R): array of x values
y (R): array of y values
n (I): number of points in x array
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 0 : no axis or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked grid without box
= 4 : plot ticked grid with box
= 5 : ticked grid and box with axis tick marks
= 6 : plot without box or grid
(10's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
xl (R): x axis length in inches (integer valued)
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches (integer valued)
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for plotted line
ic(7) : color for title (return)
l (I): data line type (required if nt < 0 or |nt|/100 > 0)
common /cplotsc/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl 1 SUBROUTINE PLOTSC2
.x LINE
.x DASHL
.p
~PLOTSC2 plots two curves defined by the x,y and x,y2 arrays with
axes and a plot title. An auto-scaling option scales the axes to
place both curves within the axes. Curves are distinguished by line
type. The y curve uses a solid line (LINE) while the y2 curve uses a dashed
line (DASHL). Various options select the format of plotting.
.lit
CALL PLOTSC2(x,y,y2,n,iflag,xl,yl,xt,nxt,yt,nyt,t,nt,
<xm,xx,ym,yx<<,ic>,l>>)
x (R): array of x values
y (R): array of y values (plotted solid)
y2 (R): second array of y values (plotted dashed)
n (I): number of points in x array
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000 : do not initialize LONGLIB before plotting
(1's digit) = 0 : no axis or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked grid without box
= 4 : plot ticked grid with box
= 5 : plot ticked grid and box with axis tick marks
= 6 : plot without grid or box
(1's digit) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
xl (R): x axis length in inches (integer valued)
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches (integer valued)
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string (limited to 99 characters)
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
if |nt|/100 > 0 : use line type list
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl, yl or nt<0)
yx (R): maximum value of y array (required if xl, yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis line
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color for plotted line 1
ic(6) : color for plotted line 2
ic(7) : color for title (return)
l (I): data line type list (required only if |nt|/100 > 0)
common /cplotsc2/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl 1 SUBROUTINE SCATPL
.p
.x scatter plot
~SCATPL plots data point pairs (x,y) in a scatter plot format using
~log and/or ~linear scaling including appropriate axes and plot title.
Several different sets of data may be plotted on the same plot by
specifying different plotting symbols for each set of data points.
Various options select the format of plotting. If nl=1 then the x
and y arrays may be 1d arrays.
.lit
CALL SCATPL(x,y,nl,np,iflag,nsym,s,xl,yl,xt,nxt,yt,nyt,
t,nt,<xm,xx,ym,yx<,ic>>)
x (R): array of x values dimensioned x(np,nl)
y (R): array of y values dimensioned y(np,nl)
nl (I): number of symbol types (if nl=1, x,y may be 1d arrays)
np (I): number of data point pairs (x,y) of same symbol type
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
nsym (I): array of symbols numbers dimensioned nsym(nl)
nsym(n) < 0 : dots only plotted, no symbols line n
nsym(n) >= 0 : plot symbol number for line n
s (R): size of symbols (if s <= 0, 0.1 is used)
xl (R): x axis length in inches (integer-valued)
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches (integer-valued)
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl,yl or nt<0)
yx (R): maximum value of y array (required if xl,yl or nt<0)
(NOTE: color array required if nt < 0 or |nt|/100 >0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
common /cscatpl/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl 1 SUBROUTINE SEISPL
.x seismic plotting
~SEISPL allows for plotting data in the special formats often used in seismic
data processing using ~log and/or ~linear axis scaling. Appropriate
axes and plot titles may be included. The plotting format may be
selected by the value of ntype. Possible plotting formats include:
multiple "shaded" waveforms, connected lines, vertical line plots, etc.
Each line may be offset from the previous line by a specified value for
presentation on the plot (z array). A line may be added to indicate
the zero value, etc. If nl=1 then the x and y arrays
may be 1d arrays.
.lit
CALL SEISPL(x,y,z,nld,npd,nl,np,iflag,ntype,size,zref,xl,yl,
xt,nxt,yt,nyt,t,nt,<xm,xx,ym,yx<,ic>>)
x (R): array of x values dimensioned x(npd)
y (R): array of y values dimensioned y(npd,nld)
z (R): array of y-offset values dimensioned z(nl). Y value is
offset by the z value before plotting. When using log
plotting note that offset occurs after taking logs.
nld (I): dimension of y array
npd (I): dimension of x,y arrays
nl (I): number of lines plotted (if nl=1, x,y may be 1d arrays)
np (I): number of data points to plot per line
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : plot ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
ntype (I): plot format control
< 0 : line with zref plotted
= 0 : symbols only
> 0 : line without zref plotted
(magnitude) = 1 : symbols only plotted
= 2 : points only plotted
= 3 : connected points plotted
= 4 : vertical lines from points to zref line plotted
= 5 : vertical lines plus symbol at point plotted
= 6 : vertical lines and connected points plotted
= 7 : connected points and lines on + side of zref
= 8 : connected points and lines on - side of zref
= 9 : area between connected points and zref filled
= 10 : positive area filled
= 11 : negative area filled
size (R): size of symbols (ntype : 0,1,4)
spacing between area fill lines (ntype : 9,10,11)
< 0 : indicates center line to be dotted
> 0 : indicates center line solid (if plotted)
zref (R): offset added to all z values
xl (R): x axis length in inches
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl,yl or nt<0)
yx (R): maximum value of y array (required if xl,yl or nt<0)
(NOTE: color array required if nt < 0)
ic (I): color array
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for plotted line 1
ic(8) : color for plotted line 2
ic(9) : etc.
common /cseispl/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE SPLOTS
.p
SPLOTS plots points and/or curves defined by x,y pairs in log and/or
linear scaling with option error bars.
~SPLOTS calls SPLOTSX and is provided to simplify axis specification.
.lit
CALL SPLOTS(x,y,nld,npd,nl,np,iflag,nopt,as,xl,yl,
xt,nxt,yt,nyt,t,nt,<xm,xx,ym,yx<,ic>>)
see SPLOTSX for variable description
common /csplots/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.hl1 SUBROUTINE SPLOTSX
.x error bars
.p
Appropriate axes and plot title may be included.
Various options select the plotting format of plotting. Possible plot
formats include scatter plots, connected line points with error bars
shown, points with error bars, a displacement line from x axis, etc.
.p
This subroutine may be used to plot several sets of curves. For a given
set (or line) of points, the upper error bar value may be given in the
next set (or line) of points. The lower error bar value may be given in
the following set (or line). When the error bar option is used, the value
of nl should be the number of points sets (or lines) to be plotted not
including the error bar sets. This subroutine permits axis parameter
flexibility and dimensioning for y array.
.lit
CALL SPLOTSX(x,y,nld,npd,nl,np,iflag,nopt,as,xl,yl,
nmx,nnx,mlx,tsx,ndx,smx,nmy,nny,mly,tsy,ndy,smy,
xt,nxt,yt,nyt,t,nt,<xm,xx,ym,yx<,ic>>)
x (R): array of x values dimensioned at least x(np)
y (R): array of y values dimensioned y(npd,nld)
npd (I): dimension of y
nld (I): dimension of y
nl (I): number of y lines to plot (see note below)
np (I): number of points per line
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : plot x linear, y logarithmic (base 10)
= 2 : plot x logarithmic, y linear
= 3 : plot x logarithmic, y logarithmic
= 4 : plot x linear, y linear
(10's digit) = 0 : no axes or title plotted
= 1 : axes with axis line/ticks on top and sides
= 2 : plot solid cartesian grid
= 3 : plot ticked cartesian grid without box
= 4 : plot ticked cartesian grid with box
= 5 : ticked cartesian grid, box w/axis ticks
= 6 : plot without box or cartesian grid
= 7 : plot solid logarithmic grid
= 8 : plot dotted logarithmic grid
= 9 : plot ticked logarithmic grid
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
nopt (I): option flag
(1's digit) = 0 : disconnected points
= 1 : connected points
= 2 : disconnected symbols
= 3 : connected symbols
= 4 : vertical line from point to x axis
= 5 : connect points, add vertical line from each
data point to x axis
= 6 : symbol plus vertical line from point to x axis
(10's digit) = 0 : no error bars
= 1 : error bars (see above)
= 2 : error bars witout end bars (see above)
(100's) > 0 : every (*) point shown with a symbol
(0 equivalent to 1)
as (R): size of plotted symbol and/or error bar
xl (R): x axis length in inches
< 0 : use input scaling in xm,xx
> 0 : use auto scaling computed from input array
yl (R): y axis length in inches
< 0 : use input scaling in ym,yx
> 0 : use auto scaling computed from input array
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
xt (B): x axis title string
nxt (I): number of characters in xt
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
yt (B): y axis title string
nyt (I): number of characters in yt
< 0 : axis ticks on right of y axis
= 0 : no axis
> 0 : axis ticks on left of y axis (normal)
t (B): plot title string
nt (I): number of characters in t
< 0 : use color array
= 0 : no title
> 0 : do not use color array
xm (R): minimum value of x array (required if xl or nt < 0)
xx (R): maximum value of x array (required if xl or nt < 0)
ym (R): minimum value of y array (required if xl,yl or nt<0)
yx (R): maximum value of y array (required if xl,yl or nt<0)
(NOTE: color array required if nt < 0)
ic (I): color list
ic(1) : color for grid
ic(2) : color for axis lines
ic(3) : color for axis numbers
ic(4) : color for axis titles
ic(5) : color for axis exponents
ic(6) : color for title (return)
ic(7) : color for points in line 1
ic(8) : color for symbols/error bars line 1
ic(9) : color for points in line 2
ic(10): color for symbols/error bars line 2
ic(11): etc.
common /csplotsx/xmr,dxr,ymr,dyr
xmr (R): returned value of xmin
dxr (R): returned value of scale factor (xmax-xmin)/xlen
ymr (R): returned value of ymin
dyr (R): returned value of scale factor (ymax-ymin)/ylen
.end lit
.pg
.hl1 SUBROUTINE T3DH
.p
.x surface plot
~T3DH plots a 3-d surface defined on a uniformly spaced 2-d grid in
the x,y plane using a triangular mesh with hidden line removal. The
surface can be viewed from any angle.
The input consists of the values of the z axis for each
(x,y) point on the plane. Each square grid is plotted as two triangles
using either ~SKETCH or ~PLT3DH permitting hidden line removal if desired.
T3DH calls ~INIT3DH to initialize the 3-d hidden line package. Default
space is provided in the INIT3DH common block. The ISIZE variable will
be reset to the internal size if its value is smaller than the internal
size. Sufficient space is provided for very complex surfaces.
.lit
CALL T3DH(z,ndx,ndy,nx,ny,s,p,t,dv,xl,yl,zl,iflag,ia,
xt,nxt,xm,xx,tx,sx,gx,fx,
yt,nyt,ym,yy,ty,sy,gy,fy,
zt,nzt,tz,sz,gz,fz,zm,zx<,ic>)
z (R): array of z values
ndx,ndy(I): dimensions of z array
nx,ny (I): number of points in each dimension to use of z array
s,p,t (R): yaw,roll,pitch angles of axes (see INIT3DH)
dv (R): perspective scale factor for INIT3DH
< 0 : no hidden lines in SKETCH, INIT3DH called
= 0 : INIT3DH not called to initialize 3d package,
(INIT3DH previously called)
> 0 : hidden lines in SKETCH, INIT3DH called
= 9999 : no perspective in INIT3DH
xl (R): x axis length in inches
yl (R): y axis length in inches
zl (R): z axis length in inches
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : do not use color array
= 2 : use color array
(10's digit) = 0 : hidden line removal for surface only
= 1 : hidden line removal for axis and surface
= 2 : no hidden line removal (SKETCH not used)
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
ia (I): axis option flag
< 0 : plot axis use input z axis scale
= 0 : do not plot axes
> 0 : plot axis use computed z axis scale
(1's digit) = 1 : plot y axis using input scale
= 2 : plot y axis using input, smoothed scale
(10's digit) = 1 : plot x axis using input scale
= 2 : plot x axis using input, smoothed scale
xt (B): x axis title string
nxt (I): number of characters in x axis title
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
tx (R): number and pattern of axis ticks (see AXIS3)
sx (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gx (R): rotation angle for x axis (see AXIS3DH)
fx (R): format of axis number labeling (see AXIS3)
yt (B): y axis title string
nyt (I): number of characters in y axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
ty (R): number and pattern of axis ticks (see AXIS3)
sy (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gy (R): rotation angle for y axis (see AXIS3DH)
fy (R): format of axis number labeling (see AXIS3)
zt (B): z axis title string
nzt (I): number of characters in z axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
tz (R): number and pattern of axis ticks (see AXIS3)
sz (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gz (R): rotation angle for z axis (see AXIS3DH)
fz (R): format of axis number labeling (see AXIS3)
xm,ym (R): minimum value displayed on each axis
xx,yx (R): maximum value displayed on each axis
zm (R): minimum value of z axis (required if ia < 0)
zx (R): maximum value of z axis (required if ia < 0)
ic (I): color array (required if 1's digit of iflag=2)
ic(1) : color of axis
ic(2) : surface color
.end lit
.pg
.hl1 SUBROUTINE TRIG3DH
.p
.x surface plot
.x triangc
~TRIG3DH plots a 3-d surface specified by randomly scatted set of points
as a triangular mesh with hidden line removal. The surface may be
viewed from any angle.
The input consists of a list of triplets defining the surface.
The triplets are triangulated using TRIANGC. Each triangle is
plotted using either ~SKETCH or ~PLT3DH permitting hidden line
removal if desired. TRIG3DH calls ~INIT3DH to initialize the
3-d hidden line package. Default space is provided in the INIT3DH
common block. The ISIZE variable will be reset to the internal
size if its value is smaller than the internal size. Sufficient
space is provided for very complex surfaces.
.lit
CALL TRIG3DH(x,y,z,n,s,p,t,dv,xl,yl,zl,iflag,ia,
xt,nxt,tx,sx,gx,fx,
yt,nyt,ty,sy,gy,fy,
zt,nzt,tz,sz,gz,fz,
xm,xx,ym,yx,zm,zx<,ic>)
x,y,z (R): array of point triplets (x,y,z)
n (I): number of points
s,p,t (R): yaw,roll,pitch angles of axes (see INIT3DH)
dv (R): perspective scale factor for INIT3DH
< 0 : no hidden lines in SKETCH, INIT3DH called
= 0 : INIT3DH not called to initialize 3d package,
(INIT3DH previously called)
> 0 : hidden lines in SKETCH, INIT3DH called
= 9999 : no perspective in INIT3DH
xl (R): x axis length in inches
yl (R): y axis length in inches
zl (R): z axis length in inches
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 1 : do not use color array
= 2 : use color array
(10's digit) = 0 : hidden line removal for surface only
= 1 : hidden line removal for axis and surface
= 2 : no hidden line removal (SKETCH not used)
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
ia (I): axis option flag
< 0 : do not plot axes
> 0 : plot axes according to the code,
(1's digit) = 1 : plot z axis using computed scale
= 2 : plot z axis using computed, smoothed scale
= 3 : plot z axis using input scale
input scale variables required
= 4 : plot z axis using input, smoothed scale
(100's digit) = 1 : plot y axis using computed scale
= 2 : plot y axis using computed, smoothed scale
= 3 : plot y axis using input scale
input scale variables required
= 4 : plot y axis using input, smoothed scale
(100's digit) = 1 : plot x axis using computed scale
= 2 : plot x axis using computed, smoothed scale
= 3 : plot x axis using input scale
input scale variables required
= 4 : plot x axis using input, smoothed scale
xt (B): x axis title string
nxt (I): number of characters in x axis title
< 0 : axis ticks on top of x axis
= 0 : no axis
> 0 : axis ticks on bottom of x axis (normal)
tx (R): number and pattern of axis ticks (see AXIS3)
sx (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gx (R): rotation angle for x axis (see AXIS3DH)
fx (R): format of axis number labeling (see AXIS3)
yt (B): y axis title string
nyt (I): number of characters in y axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
ty (R): number and pattern of axis ticks (see AXIS3)
sy (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gy (R): rotation angle for y axis (see AXIS3DH)
fy (R): format of axis number labeling (see AXIS3)
zt (B): z axis title string
nzt (I): number of characters in z axis title
< 0 : axis ticks on top of axis
= 0 : no axis
> 0 : axis ticks on bottom of axis (normal)
tz (R): number and pattern of axis ticks (see AXIS3)
sz (R): size of axis labeling (see AXIS3)
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
gz (R): rotation angle for z axis (see AXIS3DH)
fz (R): format of axis number labeling (see AXIS3)
xm,xx (R): minimum, maximum value of x axis
ym,yx (R): minimum, maximum value of y axis
zm,zx (R): minimum, maximum value of z axis
ic (I): color array (required if 1's digit of iflag=2)
ic(1) : color of axis
ic(2) : surface color
.end lit
.pg
.hl 1 SUBROUTINE VAX3D
.p
VAX3D plots a 3-d surface by plotting 2-d slices of the surface paralel
to the x-z plane with hidden line removal. See VAX3DX.
~VAX3D calls VAX3DX using default axis parameters to simplify calling
procedure.
.lit
CALL VAX3D(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,<xt,nxt,xs,xe,
yt,nyt,zt,nzt,zs,ze,<dm,dx<,ic>>>)
See VAX3DX for parameter description.
(iax is limited to a single digit)
.end lit
.hl 1 SUBROUTINE VAX3DX
.p
.x 2-d surface plot
~VAX3DX is a simple 3-d surface plotting routine. A 3-d surface is
plotted by plotting slices through the surface which are parallel to
the x-y plane. The y value of the surface at the intersection
of the slice plane and the y value plotted. Hidden lines are supressed,
giving the illusion of a 3 dimensional surface. The height of plotted
surface relative to its y axis value is calibrated to x and z axis. No
perspective is used. Options exist to varying the plotting angle and
to plot axes.
.p
Origin of the plot is in the lower-left corner. The x axis runs
left to right along the plot bottom. The y axis is plotted
as a vertical displacement offset by the z axis value. The z axis appears
to point into the screen. This, with the hidden line removal, gives the
illusion of depth.
.P
VAX3DX contains an internal working storage arrays dimensioned sufficiently
large for most sufaces. However, for very complex surfaces, the working
storage buffer length may be exceeded. In this case
an error message is written to the terminal and the routine terminated.
.lit
CALL VAX3DX(d,ndx,ndz,nx,nz,a,b,xh,yh,zh,iflag,iax,
<xt,nxt,xs,xe,nmx,nnx,mlx,tsx,ndx,smx,
yt,nyt,nmy,nny,mly,tsy,ndy,smy,
zt,nzt,zs,ze,nmz,nnz,mlz,tsz,ndz,smz,
<dm,dx<,ic>>>)
d (R): array of y values dimensioned d(ndx,ndz)
ndx,ndz (I): x and z dimensions of d array
nx,nz (I): x and z sizes of surface to plot d array
a (R): angle of x axis from horizontal 0-85 degrees
b (R): angle of z axis from horizontal 0-90 degrees
note: origin (1,1) is in lower-left corner
x axis runs left to right on screen
y axis runs up to down on screen
z axis appears to run into the screen but
is angled to the right
xh,yh,zh (R): length of each axis
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) >10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : Plot sides
= 1 : Do not plot sides
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axes, use input scale factors dm and dx
= 0 : no axes plotted, optional parameters (xt...dx)
not used, scaling computed from input array
> 0 : plot axes, use scaling computed from input array
only axis parameters xt through smz required.
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot smoothed values for Y axis
(10's digit) = 0 : Use default axis type
= 1 : Use input AXIS2-type axis parameters
(nmx, nnx, mlx, tsx, ndx, etc.)
(NOTE: the following optional paramters are used if iax < 0
or mod(iflag,10)=1)
xt (B): title of x axis (width)
nxt (I): number of characters in xt
= 0 : no axis plotted
> 0 : normal
xs,xe (R): starting and ending values displayed on x axis
(see AXIS2 for detailed description of axis parameters)
nmx (I): number of minor ticks between major ticks on x axis
nnx (I): highlight length of nnx-th minor tick on x axis
mlx (I): number of major tick marks on x axis
tsx (R): size of title and numbers on x axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndx (I): number of digits to right of decimal point on x axis
smx (R): major tick length on x axis
yt (B): title of y axis (depth)
nyt (I): number of characters in yt
= 0 : no y axis plotted
> 0 : normal
nmy (I): number of minor ticks between major ticks on y axis
nny (I): highlight length of nny-th minor tick on y axis
mly (I): number of major tick marks on y axis
tsy (R): size of title and numbers on y axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndy (I): number of digits to right of decimal point on y axis
smy (R): major tick length on y axis
zt (B): title of z axis (height)
nzt (I): number of characters in zt
= 0 : no z axis plotted
> 0 : normal
ze,ze (R): starting and ending valued displayed on z axis
nmz (I): number of minor ticks between major ticks on z axis
nnz (I): highlight length of nnz-th minor tick on z axis
mlz (I): number of major tick marks on z axis
tsz (R): size of title and numbers on z axis
< 0 auto exponent scaling (x10 to power) disabled
> 0 auto exponent scaling (x10 to power) enabled
ndz (I): number of digits to right of decimal point on z axis
smz (R): major tick length on z axis
(NOTE: the following optional parameters are required only if
iax < 0 or mod(iflag,10)=1)
dm,dx (R): minimum and maximum values of d array
(NOTE: color array required only if mod(iflag,10)=1)
ic (I): color list
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color index for lower plot surface (return)
ic(6) : color index for upper plot surface (return)
.end lit
.pg
.hl 1 SUBROUTINE VAX5D
.p
.x 5-d surface
.x 4-d surface plot
.x VAX3D
~VAX5D plots a 4 or 5-d surface by plotting slices through the 3rd and
4th dimensions in a 2-d array of of 3-d plots. Each 3-d surface
plots d(*) as a function of 2 of the dimensions using VAX3D.
.p
Origin of the plot is in the lower-left corner. The X axis runs
left to right along the subplot bottom. The Y axis is plotted into
the page of the subplot (see VAX3D).
The Z axis runs left to right in subplots
with the W axis vertical subplots.
.tp 8
.lit
^ W
|
| d Y
| |/_ X
|
----------> Z
.end lit
.p
Since the subplots may runoff the edge of the plotting page, the routine
includes a page size option to issue a NEWPAGE and plot the additional
subplots on separate pages. A shrinking factor is included to shrink the
subplots.
Labeling of the W and Z axis is due in the lower right hand corner.
Each subplot is further tagged with the corresponding W and Z axis
value. A multiple page plot can be pasted together to form a large
representation of a 5-d (or 4-d) surface.
.lit
CALL VAX5D(d,nd,n,a,b,iflag,iax,iform,w,xh,yh,zh,ph,pl,fac,iw,iz,
st,en,t1,nt1,t2,nt2,t3,nt3,t4,nt4,dt,ndt,<dm,dx<,ic>>)
d (R): array to plot dimensioned d(nd(1),nd(2),nd(3),nd(4))
nd (I): array of dimensions of d array
n (I): array of the number of points from in dimension to plot
a,b (R): angles a,b for VAX3D subplot
iflag (I): option flag
< 0 : do not close LONGLIB after plotting
= 0 : close LONGLIB--no plot produced
> 0 : close LONGLIB after plotting
(magnitude) > 10000 : do not initialize LONGLIB before plotting
(1's digit) = 2 : use color array (need all parameters)
= 1 : do not use color array
(10's digit) = 0 : Plot sides of subplots
= 1 : Do not plot sides
(100's) = 0 : Ask which screen device to use
<> 0 : Screen Device Number (see FRAME)
iax (I): axis format control
< 0 : plot axes, use input scale factors dm and dx
= 0 : no axes plotted, optional parameters (t1...dx)
not used, scaling computed from input array
> 0 : plot axes, axis parameters t1 through nt4 used,
scaling computed from input array
(1's digit) = 1 : Plot actual max/min or input values for Y axis
= 2 : Plot SCALE smoothed values for Y axis
(10's digit) = 0 : Axes plotted for all subplots
= 1 : Axes plotted only for first subplot
iform (I): plot format code
selects which dimension of d array is to become
which output axis
plot axis plot axis
Code X Y Z W Code X Y Z W
_____ ____________ _____ ____________
1 input: 1 2 3 4 13 3 1 2 4
2 dimen- 1 2 4 3 14 3 1 4 2
3 sion 1 4 2 3 15 3 2 1 4
4 number 1 4 3 2 16 3 2 4 1
4 1 4 3 2 16 3 2 4 1
5 1 3 2 4 17 3 4 1 2
6 1 3 4 2 18 3 4 2 1
7 2 1 3 4 19 4 1 2 3
8 2 1 4 3 20 4 1 3 2
9 2 4 3 1 21 4 2 1 3
10 2 4 1 3 22 4 2 3 1
11 2 3 4 1 23 4 3 1 2
12 2 3 1 4 24 4 3 2 1
w (R): working array dimensioned at least n(x)*n(y)
xh,yh,zh (R): length of each axis of subplot
ph,pl (R): page height, length when multiple pages required
fac (R): shrink factor for subplots (2 == FACTOR(1/2))
iw,iz (I): plot every iw'th and iz'th subplots
st,en (R): arrays containing axes start and end values (permuted
along with d array dimensions)
(NOTE: titles/number of characters permuted with d array dimensions)
t1 (B): title corresponding to 1st dimension of d
nt1 (I): number of characters in title t1
= 0 : no axis plotted
> 0 : axis plotted
t2 (B): title corresponding to 2st dimension of d
nt2 (I): number of characters in title t2
= 0 : no axis plotted
> 0 : axis plotted
t3 (B): title corresponding to 3rd dimension of d
nt3 (I): number of characters in title t3
= 0 : no axis plotted
> 0 : axis plotted
t4 (B): title corresponding to 4th dimension of d
nt4 (I): number of characters in title t4
= 0 : no axis plotted
> 0 : axis plotted
t5 (B): title corresponding to 5th dimension of d
nt5 (I): number of characters in title t5
= 0 : no axis plotted
> 0 : axis plotted
(NOTE: the following optional parameters are required only if
iax < 0 or mod(iflag,10) = 1)
dm,dx (R): minimum and maximum scale values for array
ic (I): color array
ic(1) : color for axis lines
ic(2) : color for axis numbers
ic(3) : color for axis titles
ic(4) : color for axis exponents
ic(5) : color index for lower plot surface (return)
ic(6) : color index for upper plot surface (return)
.end lit
.Chapter Miscellaneous Routines
.P
The subroutines listed below are ~miscellaneous functions and
routines used by the previously described routines. These are low-level
routines documented for the use of advanced LONGLIB programers.
.hl1 INTEGER FUNCTION IPCLIP
.p
~IPCLIP tests a point to determine if it lies in a rectangle defined by
xm,ym,xx,yx and returns an integer value indicating where point is in relation
to rectangle. The value can be easily be decoded by "anding" return
value with the binary values of 1, 2, 4, 8.
.lit
9 | 8 | 10
--------------
1 | 0 | 2
--------------
5 | 4 | 6
.end lit
.lit
iflag = IPCLIP(x,y,xm,ym,xx,yx)
x,y (R): point to test
xm,ym (R): lower left corner of rectangle
xx,yx (R): upper right corner of rectangle
iflag (I): clip flag (0-10) (see above)
.end lit
.hl1 SUBROUTINE GCONTR
.p
~GCONTR draws contour lines of a 2-d array using a technique which
produces long, connected contour lines. It assumes that the points
of the input array are equally spaced in each dimension. Several
options for contouring are provided. When cs, the label character size
is positive, the origin point (1,1) is in the
lower-left corner and the point (i,j) in the array is plotted at,
.lit
xplot = (i-1)*xl
yplot = (j-1)*yl
.end lit
If cs is negative, the x and y values plotted (xp,yp) for the point
(i,j) in the array are computed using
the ~PLT3D ~transformation common block ~PLT3B (see PLT3D),
.lit
xp = a1 * (yl * j) + a2 * (xl * i) + a3
yp = b1 * (yl * j) + b2 * (xl * i) + b4
.end lit
where the vertical height (z) is zero. In this case, xl and yl
should be set to 1.0 and PLT3D should be called before GCONTR.
GCONTR is used in the MASTER routine ~LCNTR and CVAX3DX.
.x CVAX3DX
.lit
CALL GCONTR(z,ndx,ndy,nx,ny,xl,yl,cv,nv,zm,iw,n,cs,m,i,ic,il)
z (R): 2-d array of values dimensioned z(nx,ny)
ndx,ndy (I): dimensions of data array
nx,ny (I): number of points to use in array
xl,yl (R): axis length scale factors (inches/array index)
cv (R): array of contour levels dimensioned cl(nv)
nv (I): number of contour levels (note: if nv < 0 then only
one contour level is used. It will be labeled with
the abs(nv)'th symbol)
zm (R): maximum value of z for consideration. A z value which
exceeds this value will be ignored. The cell edges
which include this point will not be included in
contouring.
iw (I): workspace dimensioned at least (2*nx*ny*nv+1)/31
n (I): contour labeling option
< 0 label with contour value (number with n digits
to the right of the decimal point)
= 0 no labelling of contours
> 0 label with alphabet (nl should be less than 26)
cs (R): size of labels
< 0 : plot contours using PLT3B transformation
xl and yl should then be set to 1.0 (see notes)
> 0 : normal location specification
m (I): minimum number of cells crossed by contour in order
for contour to be labeled
i (I): color and line type flag
= 0 color and line type arrays not used
= 1 color array used
= 2 line type array used
= 3 color and line type array used
ic (I): color list for each contour (only requied for i>0)
l (I): line type list for contours (required only for i>1)
.end lit
.hl1 INTEGER FUNCTION INXTCHR
.x vt100
.p
~INXTCHR returns a single key pressed on the terminal. In the VAX/VMS
environment, it will intercept all control
keys (including <ESC>) except ^Y,^T,^R,^Q,^Z,^S without echoing to the
screen. Opens a direct IO ~channel to the terminal driver using SYSQIO.
This routine is used by the ~PAUSE and ~CURMOTION routines.
.lit
key = INXTCHR()
key (I): (returned) terminal character (ASCII value)
if key < 0, an error reading terminal input has occured.
.end lit
.hl1 INTEGER FUNCTION IRMCHAN
.p
.x ramopen
~IRMCHAN returns the ~channel number and the Ramtek device number
used by the plot package (as assigned
by RAMOPEN) for communicating with the Ramtek.
Returns a negative value when the Ramtek package is not initialized
or when the Ramtek channel is not yet assigned.
.lit
ich = IRMCHAN(id)
id (I): (returned) Ramtek device number
ich (I): (returned) Ramtek channel number
if ich <=0 the Ramtek is not is use.
.end lit
.hl1 SUBROUTINE MATMUL4
.p
~MATMUL4 multiplies two 4x4 matrixes A and B and sets C=AB. Does not
change the contents of A and B.
.lit
CALL MATMUL4 (c,a,b)
c,a,b (R): 4 x 4 matrixes
.end lit
.hl1 SUBROUTINE MTV4
.p
~MTV4 multiplies a 4 element row vector by a 4x4 matrix and sets V2=A V1.
.lit
CALL MTV4 (v2,a,v1)
v2 (R): 4 element row vector
a (R): 4 x 4 matrix
v1 (R): 4 element row vector
.end lit
.hl1 SUBROUTINE NXTVU
.p
.x plt3d
~NXTVU is used internally by PLT3D. NXTVU computes the maximum (or minimum)
of two piecewise linear functions: the curve specified in the input d array
and the curve stored in the working array w.
On return the new maximum (minimum) curve replaces the old in w. Any line
segments or fractions thereof above (below) the maximum (minimum) are plotted.
If iabs(i)=1 the input is copied into the working array and plotted.
Subsequent calls should use iabs(i)=2.
Using i positive computes the maximum while using i negative plots the
minimum.
.p
A grid of lines in only one dimension may be made by calling NXTVU once
for each row, adjusting the d curve to offset each row by a small
amount to give the impression of a surface.
.p
The dimension of the working arrays is dependent of the surface
complexity -- the greater the complexity the larger n2 must be. ier is
used to indicate when n2 is not large enough. As a minimum n2>2*n.
Note: w should not be modified between calls.
.lit
CALL NXTVU (i,d,n,w,n2,ier)
i (I): initialize code
< 0 : plot lower side of surface
=> 0 : plot upper side of surface
= -1 : first call for lower surface plot
= -2 : subsequent calls for lower surface plot
= 1 : first call for upper surface plot
= 2 : subsequent calls for upper surface plot
d (R): array of (x,y) coordinate pairs dimensioned d(2*n)
d(1) = x(1)
d(2) = y(1)
d(3) = x(2)
...
n (I): number of coordinate pairs in d array
w (R): working storage array of dimensioned d(n2)
(should not be modified between calls)
n2 (I): dimension of working array
ier (I): (returned) error code
= 0 : no error
= 1 : out of space in w
.end lit
.hl1 SUBROUTINE PAUSE
.x INXTCHR
.p
~PAUSE prompts terminal without a CTERM(1) for a keystroke to continue.
Uses INXTCHR.
.lit
CALL PAUSE
(no arguments)
.end lit
.hl1 SUBROUTINE PAUSEP
.x INXTCHR
.p
~PAUSEP prompts terminal for a keystroke to continue. Includes appriate
~CTERM calls to prompt in text mode then returns terminal to plot mode.
Uses INXTCHR.
.lit
CALL PAUSEP
(no arguments)
.end lit
.hl1 SUBROUTINE RAMCLOSE
.p
~RAMCLOSE closes and deassigns the ~Ramtek channel and deallocates the device.
When the ~REF routines are used, it interatively prompts for the output
device and option. ~REFDIS called prior to RAMCLOSE disables the prompting
in the REF package. Note that RAMCLOSE is call by ~PLOTRM when a
PLOTND or PLOTRM(0.,0.,11) is called.
.lit
CALL RAMCLOSE (ic)
ic (I): channel number (from RAMOPEN or IRMCHAN)
.end lit
.hl 1 SUBROUTINE REFDIS
.p
~REFDIS is used only in the ~LONGLIBR version of the longlib graphics
library. It is a dummy call for other versions. REFDIS is a non-interactive
method of specifying the output device (REF file, terminal screen, or
LONGLIB metafile) to be used for outputing the REF bit-map Ramtek image array.
When called prior to PLOTND, it outputs the array to the device
specified in the call without user intervention.
When REFDIS is not called prior to PLOTND, PLOTND will call REFDIS and
the user will be prompted for the output device and option.
Note: REFDIS may be called multiple times to output to several devices.
.p
When the internal REF data array is output to the terminal or metafile
output each line of the internal array is scanned left to right. Connected
pixels having the same color are collected and plotted (using PLOT) to the
output device. Pixels with 0 value are not output. The pixel-to-inch
output scaling can be user selected to correspond to the actual hardware
resolution of the output device. Normal resolution for the terminal output
is 9.5/1024 inch/pixel (most terminals do not actually have this resolution).
Normal resolution for the meta file output is 1/300 inch/pixel.
Hence, at normal resolution, the 1280x1024 pixel REF array more than
fills the terminal screen. The pixel image is output with the lower-left
corner at (0,0). By changing the origin prior to call the user can
display any desired portion of the image.
.lit
CALL REFDIS(id,ot,n,rx,ry)
id (I): Output device
=-1 : graphics terminal number code (see FRAME)
user-specified (rx,ry) used
= 1 : graphics terminal number code (see FRAME)
default resolution used
= 2 : Ramtek emulation file (REF)
(ot = 1 : absolute file write)
(ot = 2 : write out only non-zero pixels)
(ot = 3 : write out only zero pixels)
=-3 : LONGLIB metafile output
user-specified (rx,ry) used
= 3 : LONGLIB metafile output
default resolution used
ot (I): Output option code (see above)
n (C): REF file name
rx,ry (R): user-specified output resolution (inch/pixel)
.end lit
.hl 1 SUBROUTINE RMCLEAR
.p
~RMCLEAR clears ~Ramtek screen.
.lit
CALL RMCLEAR (ic,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMDIR
.x Ramtek image data
.p
~RMDIR sets the write direction for ~image array data on the
~Ramtek display. This routine is supported in the REF package.
.lit
CALL RMDIR (ic,is,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
is (I): scan sequence code
code pix-to-pix line-to-line
0 L-R T-B
1 R-L T-B
2 L-R B-T
3 R-L B-T
4 T-B L-R
5 B-T L-R
6 T-B R-L
7 B-T R-L
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMFNTSIZE
.p
~RMFNTSIZE changes the size of Ramtek ~text displayed on the ~Ramtek display.
Not supported in REF package.
.lit
CALL RMFNTSIZE (ic,ih,iv,ihs,ivs,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
ih,iv (I): horizontal,vertical dimension
ihs,ivs (I): horizontal,vertical spacing
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RAMOPEN
.p
~RAMOPEN (1) translates the local name "RM" to determine the ramtek device
number, (2) allocates the ramtek device, (3) assigns a channel to the Ramtek
device, and (4) opens the channel I/O. Returns the channel number or
-1 if device is not available. This is routine is called by RPLOTS which
is called by FRAME. RAMOPEN initializes the REF array.
.lit
CALL RAMOPEN(ic,it,id,ie)
ic (I): returned channel number
it (I): Ramtek device code input
= 1 1280x1024 Ramtek
= 2 512x512 Ramtek
id (I): returned Ramtek device number
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RAMOUT
.p
~RAMOUT outputs a command and data array to the ~Ramtek display.
(see Ramtek manual for command formats). The REF package uses RAMOUT
for a different purpose.
.lit
CALL RAMOUT (ic,m,n,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
m (B): array of bytes to output
n (I): number of bytes
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMPAN
.p
~RMPAN pans Ramtek display. Not supported in REF package.
.lit
CALL RMPAN (ic,il,ir,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
il (I): left x pixels
ir (I): right y pixels
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMPLOT
.p
~RMPLOT plots an array of connected vectors using pixel locations on Ramtek
or REF package. This routine is called by PLOTRM which is called by PLOT.
RMPLOT simulates line widths using the width information stored in an
internal common block by RMTEXTURE by replicating the line several times
with pixel offsets to produce a "thick" line.
Note: x is in pixels from right to left. y is in pixels from top of display.
.x color table
.x RMTEXTURE
.lit
CALL RMPLOT (ic,n,ia,k,ie)
ic (I): channel number (from RAMOPEN or IRMCHAN)
n (I): number of point pairs (<129)
ia (I): array of point pairs (in pixels)
a(1)=x1,a(2)=y1,a(3)=x2,...
k (I): color table index to use
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMREADBYTE
.x Ramtek image data
.p
~RMREADBYTE reads the ~Ramtek ~image array. Supported by REF.
.lit
CALL RMREADBYTE (ic,a,n,ie)
ic (I): channel number (from RAMOPEN)
a (B): (returned) image data
n (I): number of words of a to read
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMREADCOL
.x color table
.p
~RMREADCOL reads the ~Ramtek color table from the Ramtek display.
The color table is ~INTEGER*4 words.
Not supported by REF.
.lit
CALL RMREADCOL (ic,ia,n,ie)
ic (I): channel number (from RAMOPEN)
ia (I): (returned) color table array
n (I): number of words of a to read
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMREADCURSOR
.x curmotion
.x RMSETCURSOR
.p
~RMREADCURSOR reads the current ~Ramtek ~cursor device position.
Called by CURMOTION, etc. See RMSETCURSOR. Not supported on REF package.
.lit
CALL RMREADCURSOR (ic,id,ix,iy,it,iv,ien,ie)
ic (I): channel number (from RAMOPEN)
id (I): cursor device number
ix,iy (I): (returned) pixel location of cursor (pixels)
it,iv,ien (I): (returned) codes for track, visible, enter
switches, see RMSETCURSOR
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMREADWORD
.x Ramtek image data
.p
~RMREADWORD reads ~INTEGER*2 words from the ~Ramtek ~image array.
Supported by REF.
.lit
CALL RMREADWORD (ic,id,n,ie)
ic (I) : channel number (from RAMOPEN)
id (I*2): (returned) image data
n (I) : number of words to read
ie (I) : (returned) error code
.end lit
.hl1 SUBROUTINE RMSETCUR
.p
.x CURLOCATE
~RMSETCUR moves specified ramtek ~cursor device to a specified position and
sets it as visible and/or blinking. Called by CURLOCATE. Not supported
by REF
.lit
CALL RMSETCUR (ic,i,ix,iy,ib,iv,ie)
ic (I): channel number (from RAMOPEN)
i (I): cursor device number (0-3)
ix,iy (I): pixel position of cursor (see RMPLOT)
ib (I): blink flag (1=no blink,2=blink)
iv (I): visible flag (2=visible, 0=invisible)
ie (I): returned error code
.end lit
.hl1 SUBROUTINE RMSTART
.x Ramtek image data
.p
~RMSTART sets the start pixel of ~image mode write on the ~Ramtek display.
Supported by REF.
.lit
CALL RMSTART (ic,ix,iy,ie)
ic (I): channel number (from RAMOPEN)
ix,iy (I): pixel position to start next image write
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMTEXT
.p
~RMTEXT places text on ~Ramtek display using Ramtek hardware text support.
Not supported on REF.
.lit
CALL RMTEXT (ic,icol,ix,iy,is,t,nt,ie)
ic (I): channel number (from RAMOPEN)
icol (I): color
ix (I): x pixel location
iy (I): y pixel location
is (I): size in pixels
t (B): byte array of text
nt (I): number of bytes in the array t
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMTEXTURE
.p
~RMTEXTURE changes the bit texturing pattern for vector line drawing
on the Ramtek. Called by ~RMPEN which is called by ~NEWPEN and
also by ~CURMOTION et. al. Supported by REF.
.LIT
CALL RMTEXTURE (ic,it,iw,is,ie)
ic (I): opened channel number (from RAMOPEN)
it (I): line type number (0-15)
iw (I): line width used in RMPLOT (1-7)
is (I): bit width scale factor (0-15)
(0= [1 bit=1 pixel], 1=[1 bit=2 pixels], etc.)
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMWIND
.p
~RMWIND sets the ~image area of the ~Ramtek display. Supported by REF.
.lit
CALL RMWIND (ic,ix,iy,mx,my,ie)
ic (I): channel number (from RAMOPEN)
ix,iy (I): starting corner of image pixels (u-r corner)
mx,my (I): ending corner of image pixels (l-l corner)
ie (I): (returned) error code
.end lit
.x Ramtek image data
.hl1 SUBROUTINE RMWRITEBYTE
.x Ramtek image data
.p
~RMWRITEBYTE write byte ~image data to the ~Ramtek image array. Supported
by REF.
.lit
CALL RMWRITEBYTE (ic,a,n,ie)
ic (I): channel number (from RAMOPEN)
a (B): image data
n (I): number of words of a to read
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMWRITECOL
.x color table
.p
~RMWRITECOL writes ~Ramtek color display data to the Ramtek display
color table. The color table is ~INTEGER*4 words.
Not supported by REF.
.lit
CALL RMWRITECOL (ic,a,n,ie)
ic (I): channel number (from RAMOPEN)
a (I): new color table array
n (I): number of words of array a
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE RMWRITEWORD
.x Ramtek image data
.p
~RMWRITEWORD writes ~INTEGER*2 ~image data to the ~Ramtek image display.
Supported by REF.
.lit
CALL RMWRITEWORD (ic,id,n,ie)
ic (I) : channel number (from RAMOPEN)
id (I*2): image data
n (I) : number of words to read
ie (I) : (returned) error code
.end lit
.hl1 SUBROUTINE RMZOOM
.p
~RMZOOM zooms ~Ramtek display. Not supported by REF.
.lit
CALL RMZOOM (ic,iz,ie)
ic (I): channel number (from RAMOPEN)
iz (I): zoom factor in powers of 2
ie (I): (returned) error code
.end lit
.hl1 SUBROUTINE VTPLOT
.p
~VTPLOT plots an array of connected vectors to terminal. ~Terminal
must be in graphics mode prior to call. VTPLOT is called by ~PLOTVT
and by ~CURLOCATE and CURMOTION., et. al. An erase flag is used
to indicate whether vector string should be visible, erased, or
XOR'ed. Since not all terminal support XOR, two flags for XOR are
provided--one which if XOR is not supported writes visible vectors
with the other which erases (if supported). Line width is simulated
by replotting adjacent lines.
.lit
CALL VTPLOT (n,m,ie,iw)
n (I): number of point pairs in m
m (I): array of points to be connected with line
m(1)=x1,m(2)=y1,m(3)=x2,...
ie (I): erase flag (0=normal, 1=XOR (on), 2=erase, 3=XOR (off))
iw (I): width
.end lit
.hl1 SUBROUTINE TRIANGC
.p
~TRIANGC triangulates a set of (x,y) points such that the boundry is a
convex polygon. This routine is an adaption of ~COSMIC routine ARC-11441.
Used by some MASTER routines.
.lit
CALL TRIANGC(x,y,n,nt,nzz,m,i,j,ni,l,nz,ie,ibe,ite)
x,y (R): arrays of x,y points
n (I): number of points
< 0 : ie,ibe,ite arrays not used
> 0 : ie,ibe,ite arrays used (normal)
nt (I): array of indicies of triangulated points t(nzz,3)
corner 1 of triangle K = (x,y) = (x(t(K,1),y(t(K,1)))
corner 2 of triangle K = (x,y) = (x(t(K,2),y(t(K,2)))
corner 3 of triangle K = (x,y) = (x(t(K,3),y(t(K,3)))
nzz (I): dimension of t array (>3*n)
m (I): number of triangles stored in t
i,j (I): working arrays (dimensioned i(ni),j(ni))
ni (I): dimension of i,j arrays (ni>=n)
l (I): number of edges in ie,ibe,ite
nz (I): dimension of ie,ibe,ite array (>3*n)
note: these arrays only needed if n>0
ie (I): array of indicies of each triangle edge ie(nz,2)
ibe (I): edge flag array dimensioned ibe(nz)
= 0 for interior edge
= 1 if ie is a boundry edge
ite (I): array of indicies of the neighbor edges of
each triangle, dimensioned ite(nz,4)
.end lit
.hl1 REAL FUNCTION XVMUL3D
.p
~XVMUL3D returns one element of an input vector (x,y,z) multiplied by an input
rotation matrix r(4,4).
.lit
value = XVMUL3D (n,x,y,z,v,r)
n (I) : which coordinate value to return (1=x,2=y,3=z)
x,y,z (R) : input x,y,z
v (R) : working vector (4 elements)
r (R) : rotation matrix (4,4)
value (R) : desired element value (see n)
.end lit
.chapter LONGLIB Library Names
.p
This chapter lists the LONGLIB graphics library subroutine names as well
as the subroutines (outside of the standard FORTRAN routines) called by
each subroutine. The calling routines (excluding MASTER routines) are
indicated as well. An asterick
indicates that the routine is documented in the documentation and may
called by the user.
.hl 1 Subroutine Calls
.ls1
.dle ,,'.'
.le;~ABSPLT
.br;Calls: WHEREVT, FIXVT0, WHEREPR, FIXPR0, WHERERM, FIXRM0
.br;Called by: *
.le;~ANXTVU
.br;Calls: (none)
.br;Called by: NXTVU
.le;~ARCALC
.br;Calls: (none)
.br;Called by: LINSEQ
.le;~ARCPLT
.br;Calls: SPIFUN, PLOT, SPIDER
.br;Called by: LINSEQ
.le;~ARCSET (Entry of ARCPLT)
.br;Calls: PLOT
.br;Called by: LINSEQ
.le;~ARROW
.br;Calls: PLOT
.br;Called by: *
.le;~ASTEXIT
.br;Calls:
.br;Called by: (qio -- system routine)
.le;~ASTINTER
.br;Calls: (none)
.br;Called by: *, PLOT
.le;~AXIS
.br;Calls: PLOT, SYMBOL, NUMBER
.br;Called by: *
.le;~AXIS2
.br;Calls: PLOT, SYMBOL, NUMBER
.br;Called by: *
.le;~AXIS3
.br;Calls: PLOT, SYMBOL, NUMBER
.br;Called by: *
.le;~AXIS3D
.br;Calls: ROTEM, MATMUL4, PLOT3D, NUM3D, SYM3D, XVMUL3D
.br;Called by: *
.le;~AXIS3DH
.br;Calls: ROTEM, MATMUL4, PLT3D, SKETCH, NUM3DH, SYM3DH, XVMUL3D
.br;Called by: *
.le;~BARCHR
.br;Calls: FRAME, CTERM, PLOT, SYMBOL, NUMBER, PLOTND, NEWPEN, SHADE
.br;Called by: *
.le;~BITCURSOR
.br;Calls: (none)
.br;Called by: *
.le;~BITMAP
.br;Calls: PLOT, LNDSEA
.br;Called by: *
.le;~CHECK3D
.br;Calls: (none)
.br;Called by: LINHID
.le;~CHLSKYS
.br;Calls: (none)
.br;Called by: SMOOTHC
.le;~CIRCLE
.br;Calls: PLOT
.br;Called by: *, PLRAX
.le;~CLIP3D
.br;Calls: (none)
.br;Called by: IPCLP3
.le;~CLPIT
.br;Calls: IPCLIP
.br;Called by: PLOTVT, PLOTRM, PPLOT
.le;~IPCLIP
.br;Calls: (none)
.br;Called by: CLPIT, PLOTVT, PLOTRM, PPLOT
.le;~CNCELPLT
.br;Calls: SEGCODE, POLY1INT, PLOT
.br;Called by: CNTRPLT
.le;~CNCELPLT3D
.br;Calls: SEGCODE, RVXPT3D, PLOT, POLY1INT
.br;Called by: CNT3DX
.le;~CNDRAW
.br;Calls: PLOT, NEWPEN, SYMBOL, NUMBER
.br;Called by: GCONTR
.le;~CNT3D
.br;Calls: CNT3DX
.br;Called by: *
.le;~CNT3DX
.br;Calls: SCALE, FRAME, CTERM, AXIS2, AXIS, VXPT3D, CNCELPLT3D,
TRCELPLT3D, PLOTND, NEWPEN
.br;Called by: *, CNT3D
.le;~CNTLN
.br;Calls: FRAME, CTERM, SCALE, AXIS3, PLOT, SYMBOL, CNCELPLT,
TRIANGC, INTERPC, CNTOUR, PLOTND, NEWPEN
.br;Called by: *
.le;~CNTOUR
.br;Calls: PLOT
.br;Called by: CNTLN
.le;~CNTRPLT
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS, CNCELPLT, PLOTND, NEWPEN
.br;Called by: *
.le;~CSHADE
.br;Calls: PLOT, NEWPEN, PICHRT
.br;Called by: *
.le;~CTERM
.br;Calls: (none)
.br;Called by: *, PLOTVT
.le;~CUBE
.br;Calls: PLT3DH, SKETCH
.br;Called by: *, HIST3D
.le;~CURBAND
.br;Calls: RMTEXTURE, RMSETCUR, RMPLOT, INXTCHR, VTPLOT
.br;Called by: *
.le;~CURLOCATE
.br;Calls: RMSETCUR, VTPLOT
.br;Called by: *
.le;~CURMOTION
.br;Calls: INXTCHR, RMSETCUR, VTPLOT
.br;Called by: *
.le;~CURRECT
.br;Calls: RMTEXTURE, RMSETCUR, RMPLOT, INXTCHR, VTPLOT
.br;Called by: *
.le;~CVAX3D
.br;Calls: CVAX3DX
.br;Called by: *
.le;~CVAX3DX
.br;Calls: NXTVU, PLOT, FRAME, GCONTR, PLT3D, HLT3D, CTERM, AXIS3
.br;Called by: *, CVAX3D
.le;~DASHL
.br;Calls: PLOT, SYMBOL
.br;Called by: *
.le;~DRAW3D
.br;Calls: PLOT
.br;Called by: PLOT3D
.le;~EARTH3D
.br;Calls: SPRECT1, PLOT3D
.br;Called by: *
.le;~ELLIPSE
.br;Calls: PLOT
.br;Called by: *
.le;~ENABLEAST
.br;Calls: ENAST
.br;Called by: *, FRAME
.le;~ENAST
.br;Calls: (qio system routine if control-c interrupt code is used in package)
.br;Called by: ENABLEAST
.le;~FACTOR
.br;Calls: VFACTOR, RFACTOR, PFACTOR
.br;Called by: *
.le;~FIXPR0
.br;Calls: PPLOTP
.br;Called by: *, ABSPLT
.le;~FIXRM0
.br;Calls: RMTEXTURE
.br;Called by: *, ABSPLT
.le;~FIXVT0
.br;Calls: NEWVPEN
.br;Called by: *, ABSPLT
.le;~FRAME
.br;Calls: VPLOTS, RPLOTS, PPLOTS, ENABLEAST, EXIT (system routine)
.br;Called by: *, PLOTS
.le;~GCONTR
.br;Calls: CNDRAW
.br;Called by: *, LCNTR
.le;~GETCURSOR
.br;Calls: (none)
.br;Called by: *
.le;~GLPLOT
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS3, LINE, LGLIN, PLOTND
.br;Called by: *
.le;~GRID
.br;Calls: PLOT
.br;Called by: *
.le;~HELPME
.br;Calls: LIB$DISPLAY_OUTPUT, LIB$STATUS
.br;Called by: *
.le;~HIST3D
.br;Calls: SCALE, FRAME, CTERM, AXIS3DH, PLT3DH, SKETCH, PLOT,
PLOTND, INIT3DH
.br;Called by: *
.le;~HLT3D
.br;Calls: NXTVU, PLOT
.br;Called by: *, CVAX3DX, MVAX3DX
.le;~HPLT
.br;Calls: PLOT
.br;Called by: LINHID
.le;~INIT3D
.br;Calls: MATMUL4, ROTEM
.br;Called by: *
.le;~INIT3DH
.br;Calls: (none)
.br;Called by: *
.le;~INTERPC
.br;Calls: (none)
.br;Called by: CNTLN
.le;~INTERSECT
.br;Calls: (none)
.br;Called by: VAX3DX
.le;~INXTCHR
.br;Calls: SYS$QIO
.br;Called by: *, PAUSE, PAUSEP, CURMOTION, CURRECT, CURBAND
.le;~IPCLP3
.br;Calls: CLIP3D
.br;Called by: PLOT3D
.le;~IRMCHAN
.br;Calls: (none)
.br;Called by: *
.le;~ISEGCODE
.br;Calls: (none)
.br;Called by: TRCELPLT3D
.le;~ISOL3D
.br;Calls: (none)
.br;Called by: LINHID
.le;~JPLTAG
.br;Calls: SHADE, PLOT
.br;Called by: *
.le;~LANDMAP
.br;Calls: PLOT
.br;Called by: *
.le;~LCNTR
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS, GCONTR, PLOTND, NEWPEN
.br;Called by: *
.le;~LCOEF
.br;Calls: (none)
.br;Called by: LINHID
.le;~LGAXS
.br;Calls: PLOT, SYMBOL, NUMBER
.br;Called by: *
.le;~LGLIN
.br;Calls: PLOT, SYMBOL
.br;Called by: *
.le;~LGRID
.br;Calls: PLOT
.br;Called by: *
.le;~LINE
.br;Calls: PLOT, SYMBOL
.br;Called by: *
.le;~LINHID
.br;Calls: LCOEF, VSRT1, VSRTR, HPLT, CHECK3D, ISOL3D, STAT3D
.br;Called by: LINHID
.le;~LINSEQ
.br;Calls: PRETRP, ARCALC, SMOOTHC, SPISET, ARCSET, ARCPLT
.br;Called by: *, SYMSS
.le;~LNDSEA
.br;Calls: (none)
.br;Called by: BITMAP
.le;~LSPLOT
.br;Calls: FRAME, CTERM, PLOTND, SYMBOL, SCALE, NEWPEN, PLOT
.br;Called by: *
.le;~MATMUL4
.br;Calls: (none)
.br;Called by: PLOT3D, SYM3D, SYM3DH
.le;~MESH3D
.br;Calls: MESH3DX
.br;Called by: *
.le;~MESH3DX
.br;Calls: SCALE, FRAME, CTERM, VXPT3D, AXIS2, AXIS, PLOT, PLOTND
.br;Called by: *, MESH3D
.le;~MIDC
.br;Calls: (none)
.br;Called by: TRIANGC
.le;~MTV4
.br;Calls: (none)
.br;Called by: PLOT3D, SYM3D, SYM3DH, XVMUL3D
.le;~MVAX3D
.br;Calls: MVAX3DX
.br;Called by: *, MVAX5D
.le;~MVAX3DX
.br;Calls: SCALE, FRAME, CTERM, PLT3D, HLT3D, AXIS3, PLOT, PLOTND
.br;Called by: *, MVAX3D
.le;~MVAX5D
.br;Calls: SCALE, FRAME, CTERM, RTERM, SYMBOL, NUMBER, MVAX3D, PLOT,
FACTOR, PLOTND
.br;Called by: *
.le;~NEWPAGE
.br;Calls: PPLOT
.br;Called by: *
.le;~NEWPEN
.br;Calls: RMPEN, PPEN
.br;Called by: *, CNDRAW, SHADE, CSHADE, GCONTR
.le;~NEWVCOL
.br;Calls: (none)
.br;Called by: VPLOTS, PLOTVT
.le;~NEWVPEN
.br;Calls: (none)
.br;Called by: VPEN
.le;~NUM3D
.br;Calls: SYM3D
.br;Called by: *, AXIS3D
.le;~NUM3DH
.br;Calls: SYM3DH
.br;Called by: *, AXIS3DH
.le;~NUMBER
.br;Calls: SYMBOL
.br;Called by: *, AXIS, AXIS2, AXIS3, CNDRAW
.le;~NXTVU
.br;Calls: PLOT, NXT0VU, ANXTVU
.br;Called by: *, PLT3D, HLT3D, MVAX3DX, CVAX3DX
.le;~OLDNUMB
.br;Calls: SYMBOL
.br;Called by: *
.le;~NXT0VU
.br;Calls: (none)
.br;Called by: NXTVU
.le;~PAUSE
.br;Calls: INXTCHR
.br;Called by: *
.le;~PAUSEP
.br;Calls: INXTCHR, CTERM
.br;Called by: *
.le;~PFACTOR
.br;Calls: (none)
.br;Called by: *, FACTOR
.le;~PHIST
.br;Calls: FRAME, AXIS, PLOT, SYMBOL, SHADE, RECT, PLOTND,
CTERM
.br;Called by: *
.le;~PICHRT
.br;Calls: FRAME, SYMBOL, PLOT, NEWPEN, CSHADE, SHADE, PLOTND, CTERM
.br;Called by: *
.le;~PLOT
.br;Calls: PLOTVT, PLOTRM, PPLOT, ASTINTER
.br;Called by: *, AXIS, AXIS2, AXIS3, ARROW, BITMAP, CIRCLE, CNDRAW, DASHL,
DARW3D, ELLIPSE, FRACT, GRID, HPLT, JPLTAG, LANDMAP, LGAXS, LGLIN, LGRID,
LINE, NXTVU, PLOTND, PLRAX, PLRLN, PLT3DH, POLARMAP, RECT, SHADE, SYMBOL,
SYMS, SYMSS, TRCELPLT3D, CSHADE
.le;~PLOT3D
.br;Calls: MTV4, ROTEM, MATMUL4, VCPY, DRAW3D, IPCLP3
.br;Called by: *, AXIS3D, EARTH3D, SYM3D
.le;~PLOTLG
.br;Calls: FRAME, CTERM, NEWPAGE, SCALE, SCALG, LGRID, GRID, PLOT,
LGAXS, AXIS, LINE, LGLIN, PLOTND, SYMBOL, NEWPEN
.br;Called by: *
.le;~PLOTLG2
.br;Calls: FRAME, CTERM, NEWPAGE, SCALE, SCALG, LGRID, GRID, PLOT,
LGAXS, AXIS, LINE, LGLIN, PLOTND, SYMBOL, NEWPEN
.br;Called by: *
.le;~PLOTLGL
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS2, LINSEQ, PLOTND, SYMBOL, NEWPEN
.br;Called by: *
.le;~PLOTLGX
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS2, LGLIN, LINE, PLOTND, SYMBOL, NEWPEN
.br;Called by: *
.le;~PLOTND
.br;Calls: PLOT
.br;Called by: *
.le;~PLOTRM
.br;Calls: RMCLEAR, RMPLOT, IPCLIP, RAMCLOSE, CLPIT
.br;Called by: *, PLOT
.le;~PLOTS
.br;Calls: FRAME
.br;Called by: *
.le;~PLOTSC
.br;Calls: FRAME, CTERM, NEWPAGE, SCALE, GRID, LINE, AXIS, PLOT,
LINE, SYMBOL, PLOTND, NEWPEN
.br;Called by: *
.le;~PLOTSC2
.br;Calls: FRAME, CTERM, NEWPAGE, SCALE, GRID, LINE, AXIS, PLOT,
LINE, SYMBOL, PLOTND, NEWPEN
.br;Called by: *
.le;~PLOTVT
.br;Calls: CTERM, VTPLOT, IPCLIP, NEWVCOL, CLPIT
.br;Called by: *, PLOT
.le;~PLRAX
.br;Calls: PLOT, SYMBOL, CIRCLE
.br;Called by: *
.le;~PLRLN
.br;Calls: PLOT, SYMBOL
.br;Called by: *
.le;~PLT3D
.br;Calls: NXTVU
.br;Called by: *, MVAX3DX, CVAX3DX
.le;~PLT3DH
.br;Calls: PLOT
.br;Called by: *, SYM3DH, AXIS3DH, CUBE, T3DH, TRIG3DH, CNTOUR, HIST3D
.le;~POLARMAP
.br;Calls: PLOT
.br;Called by: *
.le;~POLY1INT
.br;Calls: (none)
.br;Called by: CENCELPLT, CNCELPLT3D
.le;~PPEN
.br;Calls: PPLOTP
.br;Called by: *, NEWPEN
.le;~PPLOT
.br;Calls: PPLOTP, IPCLIP, CLPIT
.br;Called by: *, PLOT
.le;~PPLOTP
.br;Calls: (none)
.br;Called by: NEWMSK, PPEN, PPLOT, PPLOTS
.le;~PPLOTS
.br;Calls: PPLOTP
.br;Called by: FRAME
.le;~PRESPL
.br;Calls: PPLOTP
.br;Called by: *, RESPL
.le;~PRETRP
.br;Calls: SPISET, SPIFUN
.br;Called by: LINSEQ
.le;~PSAVPL
.br;Calls: (none)
.br;Called by: *, SAVPL
.le;~PSUBPRO
.br;Calls: SUBPROC
.br;Called by: *
.le;~PXPCGT
.br;Calls: (none)
.br;Called by: SYMBOL, SYM3D, SYM3DH
.le;~RECT
.br;Calls: PLOT
.br;Called by: *
.le;~RESPL
.br;Calls: PRESPL, RRESPL, VRESPL, WHERE, PLOT
.br;Called by: *
.le;~RFACTOR
.br;Calls: (none)
.br;Called by: *, FACTOR
.le;~RAMOPEN
.br;Calls: SYS$TRANSLOG, SYS$ALLOC, SYS$DALLOC, SYS$DASSGN, SYS$ASSIGN, SYS$QIOW
.br;Called by: RPLOTS
.le;~RAMCLOSE
.br;Calls: SYS$DALLOC, SYS$DASSGN
.br;Called by: PLOTRM
.le;~RAMOUT
.br;Calls: SYS$QIOW
.br;Called by: RMSTART, RMWIND, RMPLOT, RMCLEAR, RMTEXTURE, RMZOOM,
RMPAN, RMSETCUR, RMTEXT, RMFNTSIZE
.le;~RAMOUTIN
.br;Calls: SYS$QIOW
.br;Called by: RMREADCURSOR, RMREADCOL, RMREADBYTE, RMREADWORD
.le;~REFDIS (entry of RAMCLOSE)
.br;Calls: (none)
.br;Called by: *
.le;~RMCLEAR
.br;Calls: RAMOUT
.br;Called by: PLOTRM
.le;~RMDIR
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMFNTSIZE
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMPAN
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMPLOT
.br;Calls: RAMOUT
.br;Called by: PLOTRM
.le;~RAMOUTIN
.br;Calls: SYS$QIOW
.br;Called by: RMREADBYTE, RMREADCOL, RMREADWORD
.le;~RMREADBYTE
.br;Calls: RAMOUTIN
.br;Called by: *
.le;~RMREADCOL
.br;Calls: RAMOUTIN
.br;Called by: *
.le;~RMREADCURSOR
.br;Calls: RAMOUTIN
.br;Called by: *
.le;~RMREADWORD
.br;Calls: RAMOUTIN
.br;Called by: *
.le;~RMSETCUR
.br;Calls: RAMOUT
.br;Called by: CURBAND, CURRECT, CURMOTION, CURLOCATE
.le;~RMRESET
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMSTART
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMTEXT
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMTEXTURE
.br;Calls: RAMOUT
.br;Called by: RMPEN, RPLOTS, FIXRM0, RRESPL
.le;~RMWIND
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMWRITEBYTE
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMWRITECOL
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMWRITEWORD
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMZOOM
.br;Calls: RAMOUT
.br;Called by: *
.le;~RMPEN
.br;Calls: RMTEXTURE
.br;Called by: NEWPEN
.le;~ROTEM
.br;Calls: (none)
.br;Called by: AXIS3D, INIT3D, PLOT3D, SYM3D, SYM3DH
.le;~RPLOTS
.br;Calls: PLOTRM, RMTEXTURE
.br;Called by: FRAME
.le;~RRESPL
.br;Calls: RMTEXTURE
.br;Called by: *, RESPL
.le;~RSAVPL
.br;Calls: (none)
.br;Called by: *, SAVPL
.le;~RTERM
.br;Calls: RMCLEAR, RAMCLOSE, RAMOPEN
.br;Called by: *
.le;~RVXPT3D
.br;Calls: (none)
.br;Called by: CNCELPLT3D
.le;~SAVPL
.br;Calls: PSAVPL, RSAVPL, VSAVPL, WHERE, PLOT
.br;Called by: *
.le;~SCALE
.br;Calls: (none)
.br;Called by: *
.le;~SCALG
.br;Calls: (none)
.br;Called by: *
.le;~SCATPL
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID, LGAXS,
AXIS, PLOT, SYMBOL, PLOTND
.br;Called by: *
.le;~SEGCODE
.br;Calls: (none)
.br;Called by: CNCELPLT, CNCELPLT3D
.le;~SEISPL
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID, LGAXS,
AXIS, PLOT, NEWPEN, SYMBOL, PLOTND
.br;Called by: *
.le;~SFPLOT
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID, LGAXS,
AXIS, PLOT, NEWPEN, SYMBOL, PLOTND
.br;Called by: *
.le;~SHADE
.br;Calls: PLOT, NEWPEN
.br;Called by: *, JPLTAG
.le;~SKETCH
.br;Calls: LINHID
.br;Called by: *
.le;~SMOOTHC
.br;Calls: CHLSKYS
.br;Called by: LINSEQ
.le;~SPIDER
.br;Calls: (none)
.br;Called by: ARCPLT
.le;~SPIFUN
.br;Calls: (none)
.br;Called by: ARCPLT, PRETRP
.le;~SPISET
.br;Calls: (none)
.br;Called by: LINSEQ, PRETRP
.le;~SPLOTS
.br;Calls: SPLOTSX
.br;Called by: *
.le;~SPLOTSX
.br;Calls: FRAME, CTERM, NEWPAGE, SCALG, SCALE, LGRID, GRID,
LGAXS, AXIS2, PLOT, SYMBOL, PLOTND
.br;Called by: *, SPLOTS
.le;~SPRECT1
.br;Calls: (none)
.br;Called by: EARTH3D
.le;~STAT3D
.br;Calls: (none)
.br;Called by: LINHID
.le;~STAT3D2
.br;Calls: (none)
.br;Called by: LINHID
.le;~SUBPROC
.br;Calls: LIB$SPAWN, LIB$SIGNAL
.br;Called by: PSUBPRO
.le;~SYM3D
.br;Calls: PLOT3D, ROTEM, MATMUL4, MTV4, PXPCGT
.br;Called by: *, AXIS3D, NUM3D
.le;~SYM3DH
.br;Calls: MTV4, PLT3DH, PXPCGT, ROTEM, MATMUL4
.br;Called by: *, NUM3DH, AXIS3DH
.le;~SYMBOL
.br;Calls: PLOT, PXPCGT
.br;Called by: *, AXIS, AXIS2, AXIS3, CNDRAW, DASHL, LGAXS, LGLIN, LINE,
NUMBER, OLDNUM, PLRAX
.le;~SYMS
.br;Calls: PLOT
.br;Called by: *
.le;~SYMSS
.br;Calls: PLOT, LINSEQ
.br;Called by: *
.le;~TR3DH
.br;Calls: SCALE, FRAME, CTERM, AXIS3DH, PLT3DH, SKETCH, PLOT,
PLOTND, INIT3DH
.br;Called by: *
.le;~TRCELPLT3D
.br;Calls: RVXPT3D, PLOT, ISEGCODE
.br;Called by: CNT3DX
.le;~TRIANGC
.br;Calls: MIDC
.br;Called by: *, CNTLN, TRIG3DH
.le;~TRIG3DH
.br;Calls: SCALE, FRAME, CTERM, AXIS3DH, PLT3DH, SKETCH, PLOT,
PLOTND, INIT3DH
.br;Called by: *
.le;~VAX3D
.br;Calls: VAX3DX
.br;Called by: *, VAX5D
.le;~VAX3DX
.br;Calls: SCALE, FRAME, CTERM, VXPT3D, AXIS2, AXIS, PLOT, INTERSECT,
PLOTND
.br;Called by: *, VAX3D
.le;~VAX5D
.br;Calls: SCALE, FRAME, CTERM, RTERM, SYMBOL, NUMBER, VAX3D, PLOT,
FACTOR, PLOTND
.br;Called by: *
.le;~VCPY
.br;Calls: (none)
.br;Called by: PLOT3D
.le;~VFACTOR
.br;Calls: (none)
.br;Called by: *, FACTOR
.le;~VPEN
.br;Calls: NEWVPEM
.br;Called by: NEWPEN
.le;~VPLOTS
.br;Calls: PLOTVT, NEWVPEN, NEWVCOL
.br;Called by: FRAME
.le;~VRESPL (entry of VSAVPL)
.br;Calls: NEWVPEN, PLOTVT
.br;Called by: *, SAVPL
.le;~VSAVPL
.br;Calls: (none)
.br;Called by: *, SAVPL
.le;~VSRT1
.br;Calls: (none)
.br;Called by: LINHID
.le;~VSRTR
.br;Calls: (none)
.br;Called by: LINHID
.le;~VTPLOT
.br;Calls: (none)
.br;Called by: CURRECT, PLOTVT
.le;~VXPT3D
.br;Calls: (none)
.br;Called by: CNT3DX, VAX3DX, MESH3DX
.le;~WHERE
.br;Calls: WHEREVT, WHERERM, WHEREPR
.br;Called by: *, SAVEPL, RESPL
.le;~WHERE3D
.br;Calls: (none)
.br;Called by: *
.le;~WHERE3H
.br;Calls: (none)
.br;Called by: *
.le;~WHEREPR
.br;Calls: (none)
.br;Called by: *, WHERE
.le;~WHERERM
.br;Calls: (none)
.br;Called by: *, WHERE
.le;~WHEREVT
.br;Calls: (none)
.br;Called by: *, WHERE
.le;~XFRM3D
.br;Calls: (none)
.br;Called by: *
.le;~XVMUL3D
.br;Calls: MTV4
.br;Called by: AXIS3D
.els
.pg
.hl 1 Common Block Names
.p
The following is a list of all the named common block used internally
by the LONGLIB graphics library. Those marked with an asterick are documented
under the first listed routine.
and are designed to be accessable to the user. Those
unmarked are for internal use only and may change at later revisions.
.ls1
.dle,,'.'
.le;~VT100 -- Accessed by: BITCURSOR, CURMOTION, CURLOCATE, CURBAND, CURRECT,
GETCURSOR, FRAME, VTPLOTS, VTPLOT, CTERM, PLOTVT, WHEREVT,
VFACTOR, FACTOR, FIXVT0, WHERE, VSAVPL, VRESPL, NEWVPEN, NEWVCOL
.le;~RMTEK -- Accessed by: CURMOTION, CURLOCATE, CURBAND, CURRECT, FRAME,
PLOTRM, RPLOTS, IRMCHAN, WHERERM, RFACTOR, RMPEN, FACTOR,
FIXRM0, WHERE, RSAVPL, RRESPL
.le;~PXPCOM -- Accessed by: FRAME, PPLOT, WHEREPR, PFACTOR,
PPLOTS, PPEN, FACTOR, FIXPR0, WHERE, PSAVPL, PRESPL
.le;~RAMTEKIO -- Accessed by: RAMOPEN, RAMOUT, RAMOUTIN, RMCLEAR
.le;~CHIDE -- Accessed by: INIT3DH, PLT3DH, WHERE3H, SKETCH, LINHID
.le;~HEDG -- Accessed by: LINHID, CHECK3D
.le;~GO3 -- Accessed by: LCOEF, LINHID, STAT3D, STAT3D2, CHECK3D, ISOL3D
.le;~GO * -- Accessed by: LINHID
.le;~DAVE -- Accessed by: CHECK3D, ISOL3D, STAT3D2
.le;~LSTPLT -- Accessed by: PLOT, WHERE
.le;~PLT3B * -- Accessed by: PLT3D, HLT3D, CNDRAW, MVAX3DX, CVAX3DX
.le;~LAST3D -- Accessed by: DRAW3D, WHERE3D
.le;~CPLOT3D -- Accessed by: INIT3D, PLOT3D
.le;~CGLPLOT * -- Accessed by: GLPLOT
.le;~CPLOTLG * -- Accessed by: PLOTLG
.le;~CPHIST * -- Accessed by: PHIST
.le;~CPLOTSC * -- Accessed by: PLOTSC
.le;~CPLOTSC2 * -- Accessed by: PLOTSC2
.le;~LOCATE -- Accessed by: VXPT3D, VAX3DX, CNT3DX, RVXPT3D, MESH3DX
.le;~CPLOTLG * -- Accessed by: PLOTLG
.le;~CPLOTLG2 * -- Accessed by: PLOTLG2
.le;~CPLOTLGL * -- Accessed by: PLOTLGL
.le;~CPLOTLGX * -- Accessed by: PLOTLGX
.le;~CCNTRPLT * -- Accessed by: CNTRPLT, CNTLN, LCNTR
.le;~CSPLOTS * -- Accessed by: SPLOTS
.le;~CSPLOTSX * -- Accessed by: SPLOTSX, SPLOTS
.le;~CSEISPL * -- Accessed by: SEISPL
.le;~CSCATPL * -- Accessed by: SCATPL
.le;~TT_IO -- Accessed by: INXTCHR, ICHRCHK
.le;~ASTC -- Accessed by: ASTINTER, ENAST, ASTEXIT, ENABLEAST, PLOT
.els
.chapter Plot Examples and Plotting Symbols
.p
Shown in the sections that follow are outputs (and listings) of various
programs included with LONGLIB. This include programs which produce
plotting symbols and line types/widths.
.hl1 Plotting Symbols and Character Fonts Examples
.x SYMBOLS
.x SYMS
.x SYMSS
.p
The program ~SYMBOLS was used to create a table of the
available plotting symbols and character fonts available using the
subroutines SYMBOLS, SYMS and SYMSS. These tables are shown on the
succeeding pages. A listing of SYMBOLS follows the tables.
.pg
.hl1 Line Type/Width Examples
.x line type
.x line width
.x color
.p
The program ~LINETYPE was to create a table of the available line types,
widths, and colors for each plotting device. These are shown on the
succeding pages. A listing of LINETYPE follows the tables.
.pg
.hl1 MASTER Routine Output Examples
.p
The program ~PLOTTESTS was used to obtain examples of some of the MASTER
routine outputs. A listing follows the output pages.
.pg
.hl1 3-d Routine Output Examples
.p
EXAMP3D and EXAMP3DH demonstrate the 3d routines while WORLD demonstrates
the some of the 3d map capabilities. Output and listings follow.
.pg
.hl1 Cursor Routine Test Program
.p
A listing of the program ~CURTEST follows. The program can be used
to test the operation of the graphics input cursor routines. Only a listing
is given.
.pg
.hl1 REF Output Example
.p
This section describes an example of how the Ramtek REF subpackage can
be used to produce a grey scale "image". An example of the output image
produced by first running the example program REFTEST, outputing the result to
a REF file, then using the program ~REFLAS to produce a grey scale
image on the ~QMS laser printer. A listing of the ~REFTEST program
is also provided. Note that REFTEST must be linked to the REF version
of the library (LONGLIBR) rather than the "normal" version. Also
note that REFTEST, when linked to the "normal" LONGLIB, will produce
a color image on the Ramtek display.
.! FOR VAX VMS 3.x REMOVE THE "!" FROM THE NEXT LINE
.!do index
.chapter INDEX
.pg
Reference in New Issue View Git Blame Copy Permalink