linguist/samples/Chapel/distributions.chpl

//
// Distributions Primer
//
// This primer demonstrates uses of some of Chapel's standard
// distributions.  To use these distributions in a Chapel program,
// the respective module must be used:
//
use BlockDist, CyclicDist, BlockCycDist, ReplicatedDist;
use DimensionalDist2D, ReplicatedDim, BlockCycDim;

//
// For each distribution, we'll create a distributed domain and array
// and then initialize it just to give a brief flavor of how the
// distribution maps across locales.  Running this example on 6
// locales does a nice job of illustrating the distribution
// characteristics.
//
// All of these distributions support options to map to a different
// virtual locale grid than the one used by default (a
// multidimensional factoring of the built-in Locales array), as well
// as to control the amount of parallelism used in data parallel
// loops.  See the Standard Distributions chapter of the language spec
// for more details.
//

//
// Make the program size configurable from the command line.
//
config const n = 8;

//
// Declare a 2-dimensional domain Space that we will later use to
// initialize the distributed domains.
//
const Space = {1..n, 1..n};

//
// The Block distribution distributes a bounding box from
// n-dimensional space across the target locale array viewed as an
// n-dimensional virtual locale grid.  The bounding box is blocked
// into roughly equal portions across the locales.  Note that domains
// declared over a Block distribution can also store indices outside
// of the bounding box; the bounding box is merely used to compute
// the blocking of space.
//
// In this example, we declare a 2-dimensional Block-distributed
// domain BlockSpace and a Block-distributed array BA declared over
// the domain.
//
const BlockSpace = Space dmapped Block(boundingBox=Space);
var BA: [BlockSpace] int;

//
// To illustrate how the index set is distributed across locales,
// we'll use a forall loop to initialize each array element to the
// locale ID that stores that index/element/iteration.
//
forall ba in BA do
  ba = here.id;

//
// Output the Block-distributed array to visually see how the elements
// are partitioned across the locales.
//
writeln("Block Array Index Map");
writeln(BA);
writeln();

//
// Most of Chapel's standard distributions support an optional
// targetLocales argument that permits you to pass in your own
// array of locales to be targeted.  In general, the targetLocales
// argument should match the rank of the distribution.  So for
// example, to map a Block to a [numLocales x 1] view of the
// locale set, one could do something like this:

//
// We start by creating our own array of the locale values.  Here
// we use the standard array reshape function for convenience,
// but more generally, this array could be accessed/assigned like any
// other.
//

var MyLocaleView = {0..#numLocales, 1..1};
var MyLocales: [MyLocaleView] locale = reshape(Locales, MyLocaleView);

//
// Then we'll declare a distributed domain/array that targets
// this view of the locales:
// 

const BlockSpace2 = Space dmapped Block(boundingBox=Space,
                                        targetLocales=MyLocales);
var BA2: [BlockSpace2] int;

//
// Then we'll do a similar computation as before to verify where
// everything ended up:
//
forall ba in BA2 do
  ba = here.id;

writeln("Block Array Index Map");
writeln(BA2);
writeln();



//
// Next, we'll perform a similar computation for the Cyclic distribution.
// Cyclic distributions start at a designated n-dimensional index and
// distribute the n-dimensional space across an n-dimensional array
// of locales in a round-robin fashion (in each dimension).  As with
// the Block distribution, domains may be declared using the
// distribution who have lower indices that the starting index; that
// value should just be considered a parameterization of how the
// distribution is defined.
//
const CyclicSpace = Space dmapped Cyclic(startIdx=Space.low);
var CA: [CyclicSpace] int;

forall ca in CA do
  ca = here.id;

writeln("Cyclic Array Index Map");
writeln(CA);
writeln();


//
// Next, we'll declare a Block-Cyclic distribution.  These
// distributions also deal out indices in a round-robin fashion,
// but rather than dealing out singleton indices, they deal out blocks
// of indices.  Thus, the BlockCyclic distribution is parameterized
// by a starting index (as with Cyclic) and a block size (per
// dimension) specifying how large the chunks to be dealt out are.
// 
const BlkCycSpace = Space dmapped BlockCyclic(startIdx=Space.low, 
                                              blocksize=(2, 3));
var BCA: [BlkCycSpace] int;

forall bca in BCA do
  bca = here.id;

writeln("Block-Cyclic Array Index Map");
writeln(BCA);
writeln();


//
// The ReplicatedDist distribution is different: each of the
// original domain's indices - and the corresponding array elements -
// is replicated onto each locale. (Note: consistency among these
// array replicands is NOT maintained automatically.)
//
// This replication is observable in some cases but not others,
// as shown below. Note: this behavior may change in the future.
//
const ReplicatedSpace = Space dmapped ReplicatedDist();
var RA: [ReplicatedSpace] int;

// The replication is observable - this visits each replicand.
forall ra in RA do
  ra = here.id;

writeln("Replicated Array Index Map, ", RA.numElements, " elements total");
writeln(RA);
writeln();

//
// The replication is observable when the replicated array is
// on the left-hand side. If the right-hand side is not replicated,
// it is copied into each replicand.
// We illustrate this using a non-distributed array.
//
var A: [Space] int = [(i,j) in Space] i*100 + j;
RA = A;
writeln("Replicated Array after being array-assigned into");
writeln(RA);
writeln();

//
// Analogously, each replicand will be visited and
// other participated expressions will be computed on each locale
// (a) when the replicated array is assigned a scalar:
//       RA = 5;
// (b) when it appears first in a zippered forall loop:
//       forall (ra, a) in zip(RA, A) do ...;
// (c) when it appears in a for loop:
//       for ra in RA do ...;
//
// Zippering (RA,A) or (A,RA) in a 'for' loop will generate
// an error due to their different number of elements.

// Let RA store the Index Map again, for the examples below.
forall ra in RA do
  ra = here.id;

//
// Only the local replicand is accessed - replication is NOT observable
// and consistency is NOT maintained - when:
// (a) the replicated array is indexed - an individual element is read...
//
on Locales(0) do
  writeln("on ", here, ": ", RA(Space.low));
on Locales(LocaleSpace.high) do
  writeln("on ", here, ": ", RA(Space.low));
writeln();

// ...or an individual element is written;
on Locales(LocaleSpace.high) do
  RA(Space.low) = 7777;

writeln("Replicated Array after being indexed into");
writeln(RA);
writeln();

//
// (b) the replicated array is on the right-hand side of an assignment...
//
on Locales(LocaleSpace.high) do
  A = RA + 4;
writeln("Non-Replicated Array after assignment from Replicated Array + 4");
writeln(A);
writeln();

//
// (c) ...or, generally, the replicated array or domain participates
//     in a zippered forall loop, but not in the first position.
//     The loop could look like:
//
//       forall (a, (i,j), ra) in (A, ReplicatedSpace, RA) do ...;
//


//
// The DimensionalDist2D distribution lets us build a 2D distribution
// as a composition of specifiers for individual dimensions.
// Under such a "dimensional" distribution each dimension is handled
// independently of the other.
//
// The dimension specifiers are similar to the corresponding multi-dimensional
// distributions in constructor arguments and index-to-locale mapping rules.
// However, instead of an array of locales, a specifier constructor
// accepts just the number of locales that the indices in the corresponding
// dimension will be distributed across.
//
// The DimensionalDist2D constructor requires:
// * an [0..nl1-1, 0..nl2-1] array of locales, where
//   nl1 and nl2 are the number of locales in each dimension, and
// * two dimension specifiers, created for nl1 and nl2 locale counts, resp.
//
// Presently, the following dimension specifiers are available
// (shown here with their constructor arguments):
//
// * ReplicatedDim(numLocales)
// * BlockDim(numLocales, boundingBoxLow, boundingBoxHigh)
// * BlockCyclicDim(lowIdx, blockSize, numLocales)
//

//
// The following example creates a dimensional distribution that
// replicates over 2 locales (when available) in the first dimemsion
// and distributes using block-cyclic distribution in the second dimension.
// The example computes nl1 and nl2 and reshapes MyLocales correspondingly.
//

var (nl1, nl2) = if numLocales == 1 then (1, 1) else (2, numLocales/2);
MyLocaleView = {0..#nl1, 0..#nl2};
MyLocales = reshape(Locales[0..#nl1*nl2], MyLocaleView);

const DimReplicatedBlockcyclicSpace = Space
  dmapped DimensionalDist2D(MyLocales,
                            new ReplicatedDim(numLocales = nl1),
                            new BlockCyclicDim(numLocales = nl2,
                                               lowIdx = 1, blockSize = 2));

var DRBA: [DimReplicatedBlockcyclicSpace] int;

// The ReplicatedDim specifier always accesses the local replicand.
// (This differs from how the ReplicatedDist distribution works.)
//
// This example visits each replicand. The behavior is the same
// regardless of the second index into MyLocales below.

for locId1 in 0..#nl1 do on MyLocales[locId1, 0] {

  forall drba in DRBA do
    drba = here.id;

  writeln("Dimensional2D(Replicated,BlockCyclic) Array Index Map",
          " from ", here);

  // Technicality: 'writeln(DRBA)' would read DRBA always on Locale 0.
  // Since we want to see what DRBA contains on the current locale,
  // we use 'Helper' that is mapped using the default distribution.
  // 'Helper = DRBA' captures the view of DRBA on the current locale,
  // which we then print out.

  const Helper: [Space] int = DRBA;
  writeln(Helper);
  writeln();

}