KevinMidboe/xserve-io
1
0
Fork 0
mirror of https://github.com/KevinMidboe/xserve-io.git synced 2025-10-29 09:50:23 +00:00
Code Issues Packages Projects Releases Wiki Activity

Center column scripts and utils

Browse Source
This commit is contained in:
Kevin
2024-07-07 23:47:37 +02:00
parent 5ff3a3b282
commit de715a6f32
2 changed files with 345 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

145
center-column/addressing_patterns-tcaa/addressing_patterns-tcaa.ino Normal file
View File

@@ -0,0 +1,145 @@
#include "Wire.h" // enable I2C bus
#define TCAADDR 0x70
byte saa1064 = 0x3B; // define the I2C bus address for our SAA1064
byte bank1;
byte bank2;
byte bank3;
byte bank4;
int TOTAL_LEDS = 23;
byte activityLED = 0b00000001;
byte leds[23][4] = {
{0b00000010, 0b00000000, 0b00000000, 0b00000000}, // 1
{0b00000000, 0b00000010, 0b00000000, 0b00000000}, // 2
{0b00000100, 0b00000000, 0b00000000, 0b00000000}, // 3
{0b00000000, 0b00000100, 0b00000000, 0b00000000}, // 4
{0b00001000, 0b00000000, 0b00000000, 0b00000000}, // 5
{0b00000000, 0b00001000, 0b00000000, 0b00000000}, // 6
{0b00010000, 0b00000000, 0b00000000, 0b00000000}, // 7
{0b00000000, 0b00010000, 0b00000000, 0b00000000}, // 8
{0b00100000, 0b00000000, 0b00000000, 0b00000000}, // 9
{0b00000000, 0b00100000, 0b00000000, 0b00000000}, // 10
{0b01000000, 0b00000000, 0b00000000, 0b00000000}, // 11
{0b00000000, 0b01000000, 0b00000000, 0b00000000}, // 12
{0b00000000, 0b00000000, 0b00000001, 0b00000000}, // 13
{0b00000000, 0b00000000, 0b00000000, 0b00000001}, // 14
{0b00000000, 0b00000000, 0b00000010, 0b00000000}, // 15
{0b00000000, 0b00000000, 0b00000000, 0b00000010}, // 16
{0b00000000, 0b00000000, 0b00000100, 0b00000000}, // 17
{0b00000000, 0b00000000, 0b00000000, 0b00000100}, // 18
{0b00000000, 0b00000000, 0b00001000, 0b00000000}, // 19
{0b00000000, 0b00000000, 0b00000000, 0b00001000}, // 20
{0b00000000, 0b00000000, 0b00010000, 0b00000000}, // 21
{0b00000000, 0b00000000, 0b00100000, 0b00000000}, // 22
{0b00000000, 0b00000000, 0b01000000, 0b00000000} // 23
};
void initDisplay()
{
Serial.println("starting display");
Wire.beginTransmission(saa1064);
Wire.write(B00000000); // this is the instruction byte. Zero means the next byte is the control byte
Wire.endTransmission();
}
void setup()
{
Serial.begin(9600);
Wire.begin(); // start up I2C bus
Serial.println("setting up ports");
resetBanks();
_write();
}
void tcaselect(uint8_t i) {
if (i > 7) return;
Wire.beginTransmission(TCAADDR);
Wire.write(1 << i);
Wire.endTransmission();
}
void selectLeft() { tcaselect(2); }
void selectRight() { tcaselect(1); }
void _write() {
selectLeft();
write();
delay(1);
selectRight();
write();
}
void write() {
Wire.beginTransmission(saa1064);
Wire.write(1);
Wire.write(bank1);
Wire.write(bank2);
Wire.write(bank3);
Wire.write(bank4);
Wire.endTransmission();
}
void resetBanks() {
bank1 = 0;
bank2 = 0;
bank3 = 0;
bank4 = 0;
}
void displayNumber(int number) {
bank1 = leds[number - 1][0];
bank2 = leds[number - 1][1];
bank3 = leds[number - 1][2];
bank4 = leds[number - 1][3];
}
void displayUpToNumber(int number) {
for (int i = 0; i < number; i++) {
bank1 |= leds[i][0];
bank2 |= leds[i][1];
bank3 |= leds[i][2];
bank4 |= leds[i][3];
}
}
void displayNumbers(int* numbersList, size_t length) {
for (int i = 0; i < length; i++) {
int num = numbersList[i] - 1;
bank1 |= leds[num][0];
bank2 |= leds[num][1];
bank3 |= leds[num][2];
bank4 |= leds[num][3];
}
}
void displayPercentage(double percentDecimal) {
int numberOfTotal = round(percentDecimal * TOTAL_LEDS);
displayUpToNumber(numberOfTotal);
}
void computeEthernetActivity(bool val) {
bank1 |= val; // 0 or 1
}
void loop() {
resetBanks();
delay(10);
int length = 8;
int numbers[8] = {2,3,5,6,7,13,17,22};
displayNumbers(numbers, length);
// displayUpToNumber(15);
// displayNumber(16);
// displayPercentage(0.91);
computeEthernetActivity(false);
_write();
delay(1000);
}

200
center-column/waterfall/waterfall.ino Normal file
View File

@@ -0,0 +1,200 @@
/*
Example 39.1 - NXP SAA1064 I2C LED Driver IC Demo I
Demonstrating display of digits
http://tronixstuff.com
*/
#include "Wire.h" // enable I2C bus
#include <PCA9554.h> // Load the PCA9554 Library
byte saa1064 = 0x3B; // define the I2C bus address for our SAA1064 (pin 1 to GND) ****
PCA9554 ioCon1(0x24); // Create an object at this address
int digits[16]={63, 6, 91, 79, 102, 109, 125,7, 127, 111, 119, 124, 57, 94, 121, 113};
// these are the byte representations of pins required to display each digit 0~9 then A~F
void setup()
{
Serial.begin(9600);
Wire.begin(); // start up I2C bus
Serial.println("setting up ports");
ioCon1.portMode(ALLOUTPUT);
delay(500);
initDisplay();
lightUpIO();
}
void initDisplay()
// turns on dynamic mode and adjusts segment current to 12mA
{
Serial.println("starting display");
Wire.beginTransmission(saa1064);
Wire.write(B00000000); // this is the instruction byte. Zero means the next byte is the control byte
Wire.write(B01000111); // control byte (dynamic mode on, digits 1+3 on, digits 2+4 on, 12mA segment current
Wire.endTransmission();
}
void lightUpIO() {
Serial.println("light up IO");
ioCon1.digitalWrite(0, LOW); // power green
ioCon1.digitalWrite(1, HIGH); // power red
ioCon1.digitalWrite(2, LOW); // fan green
ioCon1.digitalWrite(3, HIGH); // fan red
ioCon1.digitalWrite(4, LOW); // temp green
ioCon1.digitalWrite(5, HIGH); // temp red
ioCon1.digitalWrite(6, LOW); // lock
}
int cursor = 0;
#define WORD_SIZE 25
byte registers[4] = {0, 0, 0, 0};
byte words[WORD_SIZE][4] = {
{ 0x00, 0x00, 0x00, 0x00 },
{ 0x01, 0x00, 0x00, 0x00 },
{ 0x03, 0x00, 0x00, 0x00 },
{ 0x03, 0x03, 0x00, 0x00 },
{ 0x07, 0x03, 0x00, 0x00 },
{ 0x07, 0x07, 0x00, 0x00 },
{ 0x0F, 0x07, 0x00, 0x00 },
{ 0x0F, 0x0F, 0x00, 0x00 },
{ 0x1F, 0x0F, 0x00, 0x00 },
{ 0x1F, 0x1F, 0x00, 0x00 },
{ 0x3F, 0x1F, 0x00, 0x00 },
{ 0x3F, 0x3F, 0x00, 0x00 },
{ 0x7F, 0x3F, 0x00, 0x00 },
{ 0x7F, 0x7F, 0x00, 0x00 },
{ 0x7F, 0x7F, 0x01, 0x00 },
{ 0x7F, 0x7F, 0x01, 0x01 },
{ 0x7F, 0x7F, 0x03, 0x01 },
{ 0x7F, 0x7F, 0x03, 0x03 },
{ 0x7F, 0x7F, 0x07, 0x03 },
{ 0x7F, 0x7F, 0x07, 0x07 },
{ 0x7F, 0x7F, 0x0F, 0x07 },
{ 0x7F, 0x7F, 0x0F, 0x0F },
{ 0x7F, 0x7F, 0x1F, 0x0F },
{ 0x7F, 0x7F, 0x3F, 0x1F },
{ 0x7F, 0x7F, 0x7F, 0x1F }
};
byte words_reversed[WORD_SIZE][4] = {
// { 0x7F, 0x7F, 0x7F, 0x1F },
{ 0x7F, 0x7F, 0x3F, 0x1F },
{ 0x7F, 0x7F, 0x1F, 0x0F },
{ 0x7F, 0x7F, 0x0F, 0x0F },
{ 0x7F, 0x7F, 0x0F, 0x07 },
{ 0x7F, 0x7F, 0x07, 0x07 },
{ 0x7F, 0x7F, 0x07, 0x03 },
{ 0x7F, 0x7F, 0x03, 0x03 },
{ 0x7F, 0x7F, 0x03, 0x01 },
{ 0x7F, 0x7F, 0x01, 0x01 },
{ 0x7F, 0x7F, 0x01, 0x00 },
{ 0x7F, 0x7F, 0x00, 0x00 },
{ 0x7F, 0x3F, 0x00, 0x00 },
{ 0x3F, 0x3F, 0x00, 0x00 },
{ 0x3F, 0x1F, 0x00, 0x00 },
{ 0x1F, 0x1F, 0x00, 0x00 },
{ 0x1F, 0x0F, 0x00, 0x00 },
{ 0x0F, 0x0F, 0x00, 0x00 },
{ 0x0F, 0x07, 0x00, 0x00 },
{ 0x07, 0x07, 0x00, 0x00 },
{ 0x07, 0x03, 0x00, 0x00 },
{ 0x03, 0x03, 0x00, 0x00 },
{ 0x03, 0x00, 0x00, 0x00 },
{ 0x01, 0x00, 0x00, 0x00 }
// { 0x00, 0x00, 0x00, 0x00 }
};
void displayDigits()
// show all digits 0~9, A~F on all digits of display
{
Serial.println("displaying digits");
// first array
// 000000
// 000001
// 000011
// 000111
Wire.beginTransmission(saa1064);
Wire.write(1);
// write whatever we have placed in these registers
Wire.write(registers[0]);
Wire.write(registers[1]);
Wire.write(registers[2]);
Wire.write(registers[3]);
Wire.endTransmission();
}
void movePage() {
cursor = cursor + 1;
if (cursor > (WORD_SIZE * 2)) {
cursor = 0;
}
if (cursor <= 24) {
registers[0] = words[cursor][0];
registers[1] = words[cursor][1];
registers[2] = words[cursor][2];
registers[3] = words[cursor][3];
} else {
registers[0] = words_reversed[cursor - WORD_SIZE][0];
registers[1] = words_reversed[cursor - WORD_SIZE][1];
registers[2] = words_reversed[cursor - WORD_SIZE][2];
registers[3] = words_reversed[cursor - WORD_SIZE][3];
}
}
void clearDisplay()
// clears all digits
{
Wire.beginTransmission(saa1064);
Wire.write(1); // instruction byte - first digit to control is 1 (right hand side)
Wire.write(0); // digit 1 (RHS)
Wire.write(0); // digit 2
Wire.write(0); // digit 3
Wire.write(0); // digit 4 (LHS)
Wire.endTransmission();
}
#define TCAADDR 0x70
void tcaselect(uint8_t i) {
if (i > 7) return;
Wire.beginTransmission(TCAADDR);
Wire.write(1 << i);
Wire.endTransmission();
}
void selectLeftHalf() {
tcaselect(2);
}
void selectRightHalf() {
tcaselect(1);
}
void loop()
{
selectRightHalf();
displayDigits();
delay(1);
selectLeftHalf();
displayDigits();
movePage();
delay(20 + (cursor * 2));
// clearDisplay();
}
/* **** We bitshift the address as the SAA1064 doesn't have the address 0x70 (ADR pin
to GND) but 0x38 and Arduino uses 7-bit addresses- so 8-bit addresses have to
be shifted to the right one bit. Thanks to Malcolm Cox */