Init commit with many years of arduino sketches and projects. I dont know if the esp8266 includes much, but there are also libraries. I hope they dont have crazy automatic versioning through the Arduino IDE.

Projects/libraries/Installed_libs/NewPing/examples/NewPing15Sensors/NewPing15Sensors.pde

@@ -0,0 +1,74 @@
+// ---------------------------------------------------------------------------
+// This example code was used to successfully communicate with 15 ultrasonic sensors. You can adjust
+// the number of sensors in your project by changing SONAR_NUM and the number of NewPing objects in the
+// "sonar" array. You also need to change the pins for each sensor for the NewPing objects. Each sensor
+// is pinged at 33ms intervals. So, one cycle of all sensors takes 495ms (33 * 15 = 495ms). The results
+// are sent to the "oneSensorCycle" function which currently just displays the distance data. Your project
+// would normally process the sensor results in this function (for example, decide if a robot needs to
+// turn and call the turn function). Keep in mind this example is event-driven. Your complete sketch needs
+// to be written so there's no "delay" commands and the loop() cycles at faster than a 33ms rate. If other
+// processes take longer than 33ms, you'll need to increase PING_INTERVAL so it doesn't get behind.
+// ---------------------------------------------------------------------------
+#include <NewPing.h>
+
+#define SONAR_NUM     15 // Number or sensors.
+#define MAX_DISTANCE 200 // Maximum distance (in cm) to ping.
+#define PING_INTERVAL 33 // Milliseconds between sensor pings (29ms is about the min to avoid cross-sensor echo).
+
+unsigned long pingTimer[SONAR_NUM]; // Holds the times when the next ping should happen for each sensor.
+unsigned int cm[SONAR_NUM];         // Where the ping distances are stored.
+uint8_t currentSensor = 0;          // Keeps track of which sensor is active.
+
+NewPing sonar[SONAR_NUM] = {     // Sensor object array.
+  NewPing(41, 42, MAX_DISTANCE), // Each sensor's trigger pin, echo pin, and max distance to ping.
+  NewPing(43, 44, MAX_DISTANCE),
+  NewPing(45, 20, MAX_DISTANCE),
+  NewPing(21, 22, MAX_DISTANCE),
+  NewPing(23, 24, MAX_DISTANCE),
+  NewPing(25, 26, MAX_DISTANCE),
+  NewPing(27, 28, MAX_DISTANCE),
+  NewPing(29, 30, MAX_DISTANCE),
+  NewPing(31, 32, MAX_DISTANCE),
+  NewPing(34, 33, MAX_DISTANCE),
+  NewPing(35, 36, MAX_DISTANCE),
+  NewPing(37, 38, MAX_DISTANCE),
+  NewPing(39, 40, MAX_DISTANCE),
+  NewPing(50, 51, MAX_DISTANCE),
+  NewPing(52, 53, MAX_DISTANCE)
+};
+
+void setup() {
+  Serial.begin(115200);
+  pingTimer[0] = millis() + 75;           // First ping starts at 75ms, gives time for the Arduino to chill before starting.
+  for (uint8_t i = 1; i < SONAR_NUM; i++) // Set the starting time for each sensor.
+    pingTimer[i] = pingTimer[i - 1] + PING_INTERVAL;
+}
+
+void loop() {
+  for (uint8_t i = 0; i < SONAR_NUM; i++) { // Loop through all the sensors.
+    if (millis() >= pingTimer[i]) {         // Is it this sensor's time to ping?
+      pingTimer[i] += PING_INTERVAL * SONAR_NUM;  // Set next time this sensor will be pinged.
+      if (i == 0 && currentSensor == SONAR_NUM - 1) oneSensorCycle(); // Sensor ping cycle complete, do something with the results.
+      sonar[currentSensor].timer_stop();          // Make sure previous timer is canceled before starting a new ping (insurance).
+      currentSensor = i;                          // Sensor being accessed.
+      cm[currentSensor] = 0;                      // Make distance zero in case there's no ping echo for this sensor.
+      sonar[currentSensor].ping_timer(echoCheck); // Do the ping (processing continues, interrupt will call echoCheck to look for echo).
+    }
+  }
+  // The rest of your code would go here.
+}
+
+void echoCheck() { // If ping received, set the sensor distance to array.
+  if (sonar[currentSensor].check_timer())
+    cm[currentSensor] = sonar[currentSensor].ping_result / US_ROUNDTRIP_CM;
+}
+
+void oneSensorCycle() { // Sensor ping cycle complete, do something with the results.
+  for (uint8_t i = 0; i < SONAR_NUM; i++) {
+    Serial.print(i);
+    Serial.print("=");
+    Serial.print(cm[i]);
+    Serial.print("cm ");
+  }
+  Serial.println();
+}